diff mbox

[for-next,05/11] IB/hns: Modify the condition of notifying hardware loopback

Message ID 20161104163633.141880-6-salil.mehta@huawei.com
State Superseded
Headers show

Commit Message

Salil Mehta Nov. 4, 2016, 4:36 p.m. UTC 
From: Lijun Ou <oulijun@huawei.com>


This patch modified the condition of notifying hardware loopback.

In hip06, RoCE Engine has several ports, one QP is related
to one port. hardware only support loopback in the same port,
not in the different ports.

So, If QP related to port N, the dmac in the QP context equals
the smac of the local port N or the loop_idc is 1, we should
set loopback bit in QP context to notify hardware.

Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>

Signed-off-by: Lijun Ou <oulijun@huawei.com>

Signed-off-by: Salil Mehta  <salil.mehta@huawei.com>

---
 drivers/infiniband/hw/hns/hns_roce_hw_v1.c |   24 +++++++-----------------
 1 file changed, 7 insertions(+), 17 deletions(-)

-- 
1.7.9.5
diff mbox

Patch

diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v1.c b/drivers/infiniband/hw/hns/hns_roce_hw_v1.c
index d6df6dd..8ca36a7 100644
--- a/drivers/infiniband/hw/hns/hns_roce_hw_v1.c
+++ b/drivers/infiniband/hw/hns/hns_roce_hw_v1.c
@@ -2244,24 +2244,14 @@  static int hns_roce_v1_m_qp(struct ib_qp *ibqp, const struct ib_qp_attr *attr,
 			     QP_CONTEXT_QPC_BYTE_32_SIGNALING_TYPE_S,
 			     hr_qp->sq_signal_bits);
 
-		for (port = 0; port < hr_dev->caps.num_ports; port++) {
-			smac = (u8 *)hr_dev->dev_addr[port];
-			dev_dbg(dev, "smac: %2x: %2x: %2x: %2x: %2x: %2x\n",
-				smac[0], smac[1], smac[2], smac[3], smac[4],
-				smac[5]);
-			if ((dmac[0] == smac[0]) && (dmac[1] == smac[1]) &&
-			    (dmac[2] == smac[2]) && (dmac[3] == smac[3]) &&
-			    (dmac[4] == smac[4]) && (dmac[5] == smac[5])) {
-				roce_set_bit(context->qpc_bytes_32,
-				    QP_CONTEXT_QPC_BYTE_32_LOOPBACK_INDICATOR_S,
-				    1);
-				break;
-			}
-		}
-
-		if (hr_dev->loop_idc == 0x1)
+		port = (attr_mask & IB_QP_PORT) ? (attr->port_num - 1) :
+			hr_qp->port;
+		smac = (u8 *)hr_dev->dev_addr[port];
+		/* when dmac equals smac or loop_idc is 1, it should loopback */
+		if (ether_addr_equal_unaligned(dmac, smac) ||
+		    hr_dev->loop_idc == 0x1)
 			roce_set_bit(context->qpc_bytes_32,
-				QP_CONTEXT_QPC_BYTE_32_LOOPBACK_INDICATOR_S, 1);
+			      QP_CONTEXT_QPC_BYTE_32_LOOPBACK_INDICATOR_S, 1);
 
 		roce_set_bit(context->qpc_bytes_32,
 			     QP_CONTEXT_QPC_BYTE_32_GLOBAL_HEADER_S,