@@ -31,7 +31,7 @@ struct intel_pmic_opregion {
static struct intel_pmic_opregion *intel_pmic_opregion;
-static int pmic_get_reg_bit(int address, struct pmic_table *table,
+static int pmic_get_reg_bit(int address, const struct pmic_table *table,
int count, int *reg, int *bit)
{
int i;
@@ -21,9 +21,9 @@ struct intel_pmic_opregion_data {
u32 reg_address, u32 value, u32 mask);
int (*lpat_raw_to_temp)(struct acpi_lpat_conversion_table *lpat_table,
int raw);
- struct pmic_table *power_table;
+ const struct pmic_table *power_table;
int power_table_count;
- struct pmic_table *thermal_table;
+ const struct pmic_table *thermal_table;
int thermal_table_count;
/* For generic exec_mipi_pmic_seq_element handling */
int pmic_i2c_address;
@@ -24,7 +24,7 @@
#define VSWITCH1_OUTPUT BIT(4)
#define VUSBPHY_CHARGE BIT(1)
-static struct pmic_table power_table[] = {
+static const struct pmic_table power_table[] = {
{
.address = 0x0,
.reg = 0x63,
@@ -177,7 +177,7 @@ static struct pmic_table power_table[] = {
} /* MOFF -> MODEMCTRL Bit 0 */
};
-static struct pmic_table thermal_table[] = {
+static const struct pmic_table thermal_table[] = {
{
.address = 0x00,
.reg = 0x4F39
@@ -16,7 +16,7 @@
#define PMIC_A0LOCK_REG 0xc5
-static struct pmic_table power_table[] = {
+static const struct pmic_table power_table[] = {
/* {
.address = 0x00,
.reg = ??,
@@ -134,7 +134,7 @@ static struct pmic_table power_table[] = {
}, /* V105 -> V1P05S, L2 SRAM */
};
-static struct pmic_table thermal_table[] = {
+static const struct pmic_table thermal_table[] = {
{
.address = 0x00,
.reg = 0x75
@@ -23,7 +23,7 @@
#define CHTDC_TI_BPTHERM 0x58
#define CHTDC_TI_GPADC 0x5a
-static struct pmic_table chtdc_ti_power_table[] = {
+static const struct pmic_table chtdc_ti_power_table[] = {
{ .address = 0x00, .reg = 0x41 }, /* LDO1 */
{ .address = 0x04, .reg = 0x42 }, /* LDO2 */
{ .address = 0x08, .reg = 0x43 }, /* LDO3 */
@@ -39,7 +39,7 @@ static struct pmic_table chtdc_ti_power_table[] = {
{ .address = 0x30, .reg = 0x4e }, /* LD14 */
};
-static struct pmic_table chtdc_ti_thermal_table[] = {
+static const struct pmic_table chtdc_ti_thermal_table[] = {
{
.address = 0x00,
.reg = CHTDC_TI_GPADC
@@ -70,7 +70,7 @@
* "regulator: whiskey_cove: implements Whiskey Cove pmic VRF support"
* https://github.com/intel-aero/meta-intel-aero/blob/master/recipes-kernel/linux/linux-yocto/0019-regulator-whiskey_cove-implements-WhiskeyCove-pmic-V.patch
*/
-static struct pmic_table power_table[] = {
+static const struct pmic_table power_table[] = {
{
.address = 0x0,
.reg = CHT_WC_V1P8A_CTRL,
@@ -26,7 +26,7 @@
#define AXP288_ADC_TS_CURRENT_ON_ONDEMAND (2 << 0)
#define AXP288_ADC_TS_CURRENT_ON (3 << 0)
-static struct pmic_table power_table[] = {
+static const struct pmic_table power_table[] = {
{
.address = 0x00,
.reg = 0x13,
@@ -129,7 +129,7 @@ static struct pmic_table power_table[] = {
};
/* TMP0 - TMP5 are the same, all from GPADC */
-static struct pmic_table thermal_table[] = {
+static const struct pmic_table thermal_table[] = {
{
.address = 0x00,
.reg = XPOWER_GPADC_LOW
'struct pmic_table' is not modified in these drivers. Constifying this structure moves some data to a read-only section, so increase overall security. On a x86_64, with allmodconfig, as an example: Before: ====== text data bss dec hex filename 3811 786 0 4597 11f5 drivers/acpi/pmic/intel_pmic_xpower.o text data bss dec hex filename 4147 450 0 4597 11f5 drivers/acpi/pmic/intel_pmic_xpower.o Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> --- Compile tested-only --- drivers/acpi/pmic/intel_pmic.c | 2 +- drivers/acpi/pmic/intel_pmic.h | 4 ++-- drivers/acpi/pmic/intel_pmic_bxtwc.c | 4 ++-- drivers/acpi/pmic/intel_pmic_bytcrc.c | 4 ++-- drivers/acpi/pmic/intel_pmic_chtdc_ti.c | 4 ++-- drivers/acpi/pmic/intel_pmic_chtwc.c | 2 +- drivers/acpi/pmic/intel_pmic_xpower.c | 4 ++-- 7 files changed, 12 insertions(+), 12 deletions(-)