diff mbox series

[v1] ASoc: tas2781: Set "Speaker Force Firmware Load" as the common kcontrol for both tas27871 and tas2563

Message ID 20240704094939.1824-1-shenghao-ding@ti.com
State Accepted
Commit cabf0b0cff07bc8d6e80ab6a8f8a127a2708147b
Headers show
Series [v1] ASoc: tas2781: Set "Speaker Force Firmware Load" as the common kcontrol for both tas27871 and tas2563 | expand

Commit Message

Shenghao Ding July 4, 2024, 9:49 a.m. UTC 
Set "Speaker Force Firmware Load" as the common kcontrol
for both tas27871 and tas2563 and move it into newly-created
tasdevice_snd_controls, and keep the digital gain and analog
gain in tas2781_snd_controls.

Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>

---
v1:
 - Rename driver_name from tas2781-codec to tasdev-codec, request from
   some tas2563 users since the driver supports both tas2563 and tas2781,
   the drvier name seemed unfair to tas2563.
 - Set "Speaker Force Firmware Load" as the common kcontrol for both
   tas27871 and tas2563 and move it into newly-created
   tasdevice_snd_controls.
---
 sound/soc/codecs/tas2781-i2c.c | 29 ++++++++++++++++++++++-------
 1 file changed, 22 insertions(+), 7 deletions(-)

Comments

Mark Brown July 4, 2024, 5:40 p.m. UTC | #1 
On Thu, 04 Jul 2024 17:49:37 +0800, Shenghao Ding wrote:
> Set "Speaker Force Firmware Load" as the common kcontrol
> for both tas27871 and tas2563 and move it into newly-created
> tasdevice_snd_controls, and keep the digital gain and analog
> gain in tas2781_snd_controls.
> 
> 

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/1] ASoc: tas2781: Set "Speaker Force Firmware Load" as the common kcontrol for both tas27871 and tas2563
      commit: cabf0b0cff07bc8d6e80ab6a8f8a127a2708147b

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark
diff mbox series

Patch

diff --git a/sound/soc/codecs/tas2781-i2c.c b/sound/soc/codecs/tas2781-i2c.c
index e0e630f66101..b412f8f2e5d5 100644
--- a/sound/soc/codecs/tas2781-i2c.c
+++ b/sound/soc/codecs/tas2781-i2c.c
@@ -104,7 +104,7 @@  static int tas2781_amp_putvol(struct snd_kcontrol *kcontrol,
 	return tasdevice_amp_putvol(tas_priv, ucontrol, mc);
 }
 
-static int tas2781_force_fwload_get(struct snd_kcontrol *kcontrol,
+static int tasdev_force_fwload_get(struct snd_kcontrol *kcontrol,
 	struct snd_ctl_elem_value *ucontrol)
 {
 	struct snd_soc_component *component =
@@ -119,7 +119,7 @@  static int tas2781_force_fwload_get(struct snd_kcontrol *kcontrol,
 	return 0;
 }
 
-static int tas2781_force_fwload_put(struct snd_kcontrol *kcontrol,
+static int tasdev_force_fwload_put(struct snd_kcontrol *kcontrol,
 	struct snd_ctl_elem_value *ucontrol)
 {
 	struct snd_soc_component *component =
@@ -140,6 +140,11 @@  static int tas2781_force_fwload_put(struct snd_kcontrol *kcontrol,
 	return change;
 }
 
+static const struct snd_kcontrol_new tasdevice_snd_controls[] = {
+	SOC_SINGLE_BOOL_EXT("Speaker Force Firmware Load", 0,
+		tasdev_force_fwload_get, tasdev_force_fwload_put),
+};
+
 static const struct snd_kcontrol_new tas2781_snd_controls[] = {
 	SOC_SINGLE_RANGE_EXT_TLV("Speaker Analog Gain", TAS2781_AMP_LEVEL,
 		1, 0, 20, 0, tas2781_amp_getvol,
@@ -147,8 +152,6 @@  static const struct snd_kcontrol_new tas2781_snd_controls[] = {
 	SOC_SINGLE_RANGE_EXT_TLV("Speaker Digital Gain", TAS2781_DVC_LVL,
 		0, 0, 200, 1, tas2781_digital_getvol,
 		tas2781_digital_putvol, dvc_tlv),
-	SOC_SINGLE_BOOL_EXT("Speaker Force Firmware Load", 0,
-		tas2781_force_fwload_get, tas2781_force_fwload_put),
 };
 
 static int tasdevice_set_profile_id(struct snd_kcontrol *kcontrol,
@@ -590,6 +593,18 @@  static struct snd_soc_dai_driver tasdevice_dai_driver[] = {
 static int tasdevice_codec_probe(struct snd_soc_component *codec)
 {
 	struct tasdevice_priv *tas_priv = snd_soc_component_get_drvdata(codec);
+	int rc;
+
+	if (tas_priv->chip_id == TAS2781) {
+		rc = snd_soc_add_component_controls(codec,
+			tas2781_snd_controls,
+			ARRAY_SIZE(tas2781_snd_controls));
+		if (rc < 0) {
+			dev_err(tas_priv->dev, "%s: Add control err rc = %d",
+				__func__, rc);
+			return rc;
+		}
+	}
 
 	tas_priv->name_prefix = codec->name_prefix;
 	return tascodec_init(tas_priv, codec, THIS_MODULE, tasdevice_fw_ready);
@@ -617,8 +632,8 @@  static const struct snd_soc_component_driver
 	soc_codec_driver_tasdevice = {
 	.probe			= tasdevice_codec_probe,
 	.remove			= tasdevice_codec_remove,
-	.controls		= tas2781_snd_controls,
-	.num_controls		= ARRAY_SIZE(tas2781_snd_controls),
+	.controls		= tasdevice_snd_controls,
+	.num_controls		= ARRAY_SIZE(tasdevice_snd_controls),
 	.dapm_widgets		= tasdevice_dapm_widgets,
 	.num_dapm_widgets	= ARRAY_SIZE(tasdevice_dapm_widgets),
 	.dapm_routes		= tasdevice_audio_map,
@@ -759,7 +774,7 @@  MODULE_DEVICE_TABLE(acpi, tasdevice_acpi_match);
 
 static struct i2c_driver tasdevice_i2c_driver = {
 	.driver = {
-		.name = "tas2781-codec",
+		.name = "tasdev-codec",
 		.of_match_table = of_match_ptr(tasdevice_of_match),
 #ifdef CONFIG_ACPI
 		.acpi_match_table = ACPI_PTR(tasdevice_acpi_match),