diff mbox series

[v2,1/6] scsi: ufs: core: Add UFSHCD_QUIRK_CUSTOM_CRYPTO_PROFILE

Message ID 20240702072510.248272-2-ebiggers@kernel.org
State Superseded
Headers show
Series Basic inline encryption support for ufs-exynos | expand

Commit Message

Eric Biggers July 2, 2024, 7:25 a.m. UTC
From: Eric Biggers <ebiggers@google.com>

Add UFSHCD_QUIRK_CUSTOM_CRYPTO_PROFILE which lets UFS host drivers
initialize the blk_crypto_profile themselves rather than have it be
initialized by ufshcd-core according to the UFSHCI standard.  This is
needed to support inline encryption on the "Exynos" UFS controller which
has a nonstandard interface.

Signed-off-by: Eric Biggers <ebiggers@google.com>
---
 drivers/ufs/core/ufshcd-crypto.c | 10 +++++++---
 include/ufs/ufshcd.h             |  9 +++++++++
 2 files changed, 16 insertions(+), 3 deletions(-)

Comments

Peter Griffin July 8, 2024, 10:18 a.m. UTC | #1
Hi Eric,

On Tue, 2 Jul 2024 at 08:28, Eric Biggers <ebiggers@kernel.org> wrote:
>
> From: Eric Biggers <ebiggers@google.com>
>
> Add UFSHCD_QUIRK_CUSTOM_CRYPTO_PROFILE which lets UFS host drivers
> initialize the blk_crypto_profile themselves rather than have it be
> initialized by ufshcd-core according to the UFSHCI standard.  This is
> needed to support inline encryption on the "Exynos" UFS controller which
> has a nonstandard interface.
>
> Signed-off-by: Eric Biggers <ebiggers@google.com>
> ---

Reviewed-by:  Peter Griffin <peter.griffin@linaro.org>

[..]

regards,

Peter
diff mbox series

Patch

diff --git a/drivers/ufs/core/ufshcd-crypto.c b/drivers/ufs/core/ufshcd-crypto.c
index f2c4422cab86..debc925ae439 100644
--- a/drivers/ufs/core/ufshcd-crypto.c
+++ b/drivers/ufs/core/ufshcd-crypto.c
@@ -157,10 +157,13 @@  int ufshcd_hba_init_crypto_capabilities(struct ufs_hba *hba)
 {
 	int cap_idx;
 	int err = 0;
 	enum blk_crypto_mode_num blk_mode_num;
 
+	if (hba->quirks & UFSHCD_QUIRK_CUSTOM_CRYPTO_PROFILE)
+		return 0;
+
 	/*
 	 * Don't use crypto if either the hardware doesn't advertise the
 	 * standard crypto capability bit *or* if the vendor specific driver
 	 * hasn't advertised that crypto is supported.
 	 */
@@ -226,13 +229,14 @@  void ufshcd_init_crypto(struct ufs_hba *hba)
 	int slot;
 
 	if (!(hba->caps & UFSHCD_CAP_CRYPTO))
 		return;
 
-	/* Clear all keyslots - the number of keyslots is (CFGC + 1) */
-	for (slot = 0; slot < hba->crypto_capabilities.config_count + 1; slot++)
-		ufshcd_clear_keyslot(hba, slot);
+	/* Clear all keyslots. */
+	for (slot = 0; slot < hba->crypto_profile.num_slots; slot++)
+		hba->crypto_profile.ll_ops.keyslot_evict(&hba->crypto_profile,
+							 NULL, slot);
 }
 
 void ufshcd_crypto_register(struct ufs_hba *hba, struct request_queue *q)
 {
 	if (hba->caps & UFSHCD_CAP_CRYPTO)
diff --git a/include/ufs/ufshcd.h b/include/ufs/ufshcd.h
index bad88bd91995..b354a7eee478 100644
--- a/include/ufs/ufshcd.h
+++ b/include/ufs/ufshcd.h
@@ -641,10 +641,19 @@  enum ufshcd_quirks {
 	/*
 	 * Some host does not implement SQ Run Time Command (SQRTC) register
 	 * thus need this quirk to skip related flow.
 	 */
 	UFSHCD_QUIRK_MCQ_BROKEN_RTC			= 1 << 21,
+
+	/*
+	 * This quirk needs to be enabled if the host controller supports inline
+	 * encryption but it needs to initialize the crypto capabilities in a
+	 * nonstandard way and/or needs to override blk_crypto_ll_ops.  If
+	 * enabled, the standard code won't initialize the blk_crypto_profile;
+	 * ufs_hba_variant_ops::init() must do it instead.
+	 */
+	UFSHCD_QUIRK_CUSTOM_CRYPTO_PROFILE		= 1 << 22,
 };
 
 enum ufshcd_caps {
 	/* Allow dynamic clk gating */
 	UFSHCD_CAP_CLK_GATING				= 1 << 0,