@@ -93,6 +93,20 @@ memory@efe01000 {
};
};
+ msm_therm_sensor: thermal-sensor-msm {
+ compatible = "generic-adc-thermal";
+ #thermal-sensor-cells = <0>;
+ io-channels = <&pm6150l_adc ADC5_AMUX_THM2_100K_PU>;
+ io-channel-names = "sensor-channel";
+ };
+
+ rear_cam_sensor: thermal-sensor-rear-cam {
+ compatible = "generic-adc-thermal";
+ #thermal-sensor-cells = <0>;
+ io-channels = <&pm6150l_adc ADC5_GPIO2_100K_PU>;
+ io-channel-names = "sensor-channel";
+ };
+
thermal-zones {
chg-skin-thermal {
thermal-sensors = <&pm7250b_adc_tm 0>;
@@ -118,6 +132,30 @@ active-config0 {
};
};
+ pa0-thermal {
+ thermal-sensors = <&pm6150l_adc_tm 1>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ pa1-thermal {
+ thermal-sensors = <&pm6150l_adc_tm 0>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
pm8008-thermal {
polling-delay-passive = <100>;
thermal-sensors = <&pm8008>;
@@ -137,6 +175,64 @@ trip1 {
};
};
+ quiet-thermal {
+ thermal-sensors = <&pm6150l_adc_tm 3>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ rear-cam-thermal {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+ thermal-sensors = <&rear_cam_sensor>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ rfc-flash-thermal {
+ thermal-sensors = <&pm6150l_adc_tm 2>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ sdm-skin-thermal {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+ thermal-sensors = <&msm_therm_sensor>;
+
+ trips {
+ trip0 {
+ temperature = <45000>;
+ hysteresis = <0>;
+ type = "passive";
+ };
+
+ trip1 {
+ temperature = <55000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
xo-thermal {
thermal-sensors = <&pmk8350_adc_tm 0>;
@@ -596,6 +692,91 @@ &mpss {
status = "okay";
};
+&pm6150l_adc {
+ pinctrl-0 = <&pm6150l_adc_default>;
+ pinctrl-names = "default";
+
+ channel@4d {
+ reg = <ADC5_AMUX_THM1_100K_PU>;
+ label = "pa_therm1";
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ qcom,ratiometric;
+ };
+
+ channel@4e {
+ reg = <ADC5_AMUX_THM2_100K_PU>;
+ label = "msm_therm";
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ qcom,ratiometric;
+ };
+
+ channel@4f {
+ reg = <ADC5_AMUX_THM3_100K_PU>;
+ label = "pa_therm0";
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ qcom,ratiometric;
+ };
+
+ channel@53 {
+ reg = <ADC5_GPIO2_100K_PU>;
+ label = "rear_cam_therm";
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ qcom,ratiometric;
+ };
+
+ channel@54 {
+ reg = <ADC5_GPIO3_100K_PU>;
+ label = "rear_cam_flash_therm";
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ qcom,ratiometric;
+ };
+
+ channel@55 {
+ reg = <ADC5_GPIO4_100K_PU>;
+ label = "quiet_therm";
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ qcom,ratiometric;
+ };
+};
+
+&pm6150l_adc_tm {
+ status = "okay";
+
+ pa-therm1@0 {
+ reg = <0>;
+ io-channels = <&pm6150l_adc ADC5_AMUX_THM1_100K_PU>;
+ qcom,hw-settle-time-us = <200>;
+ qcom,ratiometric;
+ };
+
+ pa-therm0@1 {
+ reg = <1>;
+ io-channels = <&pm6150l_adc ADC5_AMUX_THM3_100K_PU>;
+ qcom,hw-settle-time-us = <200>;
+ qcom,ratiometric;
+ };
+
+ rear-cam-flash-therm@2 {
+ reg = <2>;
+ io-channels = <&pm6150l_adc ADC5_GPIO3_100K_PU>;
+ qcom,hw-settle-time-us = <200>;
+ qcom,ratiometric;
+ };
+
+ quiet-therm@3 {
+ reg = <3>;
+ io-channels = <&pm6150l_adc ADC5_GPIO4_100K_PU>;
+ qcom,hw-settle-time-us = <200>;
+ qcom,ratiometric;
+ };
+};
+
&pm6150l_flash {
status = "okay";
@@ -618,6 +799,14 @@ led-1 {
};
};
+&pm6150l_gpios {
+ pm6150l_adc_default: adc-default-state {
+ pins = "gpio6", "gpio7", "gpio10";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ bias-high-impedance;
+ };
+};
+
&pm6150l_wled {
qcom,switching-freq = <800>;
qcom,current-limit-microamp = <20000>;
Configure the thermals for the PA_THERM1, MSM_THERM, PA_THERM0, RFC_CAM_THERM, CAM_FLASH_THERM and QUIET_THERM thermistors connected to PM6150L. Due to hardware constraints we can only register 4 zones with pm6150l_adc_tm, the other 2 we can register via generic-adc-thermal. The trip points can really only be considered as placeholders, more configuration with cooling etc. can be added later. Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> --- arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts | 189 ++++++++++++++++++++++ 1 file changed, 189 insertions(+)