diff mbox

[05/11] mtd: nand: denali: remove "Spectra:" prefix from printk strings

Message ID 1478666130-13413-6-git-send-email-yamada.masahiro@socionext.com
State Accepted
Commit 789ccf17754fe95cdd4de3cae7afb09a9bb43c94
Headers show

Commit Message

Masahiro Yamada Nov. 9, 2016, 4:35 a.m. UTC
As far as I understood from the Kconfig menu deleted by commit
be7f39c5ecf5 ("Staging: delete spectra driver"), the "Spectra" is
specific to Intel Moorestown Platform.

The Denali NAND controller IP is used for various SoCs such as
Altera SOCFPGA, Socionext UniPhier, etc.  The platform specific
strings are not preferred in this driver.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

---

As an ARM-SoC developer, I only need denali.c and denali_dt.c.

I see some "Spectra:" in drivers/mtd/nand/denali_pci.c as well.
I was not quite sure if they are needed or not.
If desired, I can update this patch to remove them too.


 drivers/mtd/nand/denali.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

-- 
1.9.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
diff mbox

Patch

diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index 80d3e26..78d795b 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -402,7 +402,7 @@  static void get_hynix_nand_para(struct denali_nand_info *denali,
 		break;
 	default:
 		dev_warn(denali->dev,
-			 "Spectra: Unknown Hynix NAND (Device ID: 0x%x).\n"
+			 "Unknown Hynix NAND (Device ID: 0x%x).\n"
 			 "Will use default parameter values instead.\n",
 			 device_id);
 	}
@@ -1458,7 +1458,7 @@  int denali_init(struct denali_nand_info *denali)
 	 */
 	if (request_irq(denali->irq, denali_isr, IRQF_SHARED,
 			DENALI_NAND_NAME, denali)) {
-		pr_err("Spectra: Unable to allocate IRQ\n");
+		dev_err(denali->dev, "Unable to request IRQ\n");
 		return -ENODEV;
 	}
 
@@ -1495,7 +1495,7 @@  int denali_init(struct denali_nand_info *denali)
 	/* Is 32-bit DMA supported? */
 	ret = dma_set_mask(denali->dev, DMA_BIT_MASK(32));
 	if (ret) {
-		pr_err("Spectra: no usable DMA configuration\n");
+		dev_err(denali->dev, "no usable DMA configuration\n");
 		goto failed_req_irq;
 	}
 
@@ -1503,7 +1503,7 @@  int denali_init(struct denali_nand_info *denali)
 			     mtd->writesize + mtd->oobsize,
 			     DMA_BIDIRECTIONAL);
 	if (dma_mapping_error(denali->dev, denali->buf.dma_buf)) {
-		dev_err(denali->dev, "Spectra: failed to map DMA buffer\n");
+		dev_err(denali->dev, "failed to map DMA buffer\n");
 		ret = -EIO;
 		goto failed_req_irq;
 	}
@@ -1598,8 +1598,7 @@  int denali_init(struct denali_nand_info *denali)
 
 	ret = mtd_device_register(mtd, NULL, 0);
 	if (ret) {
-		dev_err(denali->dev, "Spectra: Failed to register MTD: %d\n",
-				ret);
+		dev_err(denali->dev, "Failed to register MTD: %d\n", ret);
 		goto failed_req_irq;
 	}
 	return 0;