diff mbox series

[5/5] wifi: rtw89: correct VHT TX rate on 20MHz connection

Message ID 20240731070506.46100-6-pkshih@realtek.com
State New
Headers show
Series wifi: rtw89: increase 8922a firmware format to 1 and support HW encryption for unicast management | expand

Commit Message

Ping-Ke Shih July 31, 2024, 7:05 a.m. UTC 
From: Dian-Syuan Yang <dian_syuan0116@realtek.com>

It may get wrong bitrate when connecting to AP set VHT 20MHz,
and thus we fix it to follow Wi-Fi spec.

Signed-off-by: Dian-Syuan Yang <dian_syuan0116@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
---
 drivers/net/wireless/realtek/rtw89/phy.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/wireless/realtek/rtw89/phy.c b/drivers/net/wireless/realtek/rtw89/phy.c
index aa20b3e9d3c6..93c4ab7a83e5 100644
--- a/drivers/net/wireless/realtek/rtw89/phy.c
+++ b/drivers/net/wireless/realtek/rtw89/phy.c
@@ -341,8 +341,11 @@  static void rtw89_phy_ra_sta_update(struct rtw89_dev *rtwdev,
 
 		mode |= RTW89_RA_MODE_VHT;
 		csi_mode = RTW89_RA_RPT_MODE_VHT;
-		/* MCS9, MCS8, MCS7 */
-		ra_mask |= get_mcs_ra_mask(mcs_map, 9, 1);
+		/* MCS9 (non-20MHz), MCS8, MCS7 */
+		if (sta->deflink.bandwidth == IEEE80211_STA_RX_BW_20)
+			ra_mask |= get_mcs_ra_mask(mcs_map, 8, 1);
+		else
+			ra_mask |= get_mcs_ra_mask(mcs_map, 9, 1);
 		high_rate_masks = rtw89_ra_mask_vht_rates;
 		if (sta->deflink.vht_cap.cap & IEEE80211_VHT_CAP_RXSTBC_MASK)
 			stbc_en = 1;