diff mbox series

[2/4] dt-bindings: media: camss: Add qcom,sdm670-camss

Message ID 20240806224219.71623-9-mailingradian@gmail.com
State New
Headers show
Series Add SDM670 camera subsystem | expand

Commit Message

Richard Acayan Aug. 6, 2024, 10:42 p.m. UTC
Add the camera subsystem for the Snapdragon 670.

Adapted from SC8280XP camera subsystem.

Signed-off-by: Richard Acayan <mailingradian@gmail.com>
---
 .../bindings/media/qcom,sdm670-camss.yaml     | 353 ++++++++++++++++++
 1 file changed, 353 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/qcom,sdm670-camss.yaml

Comments

Bryan O'Donoghue Aug. 6, 2024, 10:57 p.m. UTC | #1
On 06/08/2024 23:42, Richard Acayan wrote:
> Add the camera subsystem for the Snapdragon 670.
> 
> Adapted from SC8280XP camera subsystem.

Hmm, I'd like a little bit more of a commit log here. sdm670 as found in 
"spiffy device X" contains N CSIDs, Y VFEs.

Its not super important but a description that is device specific would 
be nice.

> 
> Signed-off-by: Richard Acayan <mailingradian@gmail.com>
> ---
>   .../bindings/media/qcom,sdm670-camss.yaml     | 353 ++++++++++++++++++
>   1 file changed, 353 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/media/qcom,sdm670-camss.yaml
> 
> diff --git a/Documentation/devicetree/bindings/media/qcom,sdm670-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sdm670-camss.yaml
> new file mode 100644
> index 000000000000..543fad1b5cd7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/qcom,sdm670-camss.yaml
> @@ -0,0 +1,353 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
> +
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/qcom,sdm670-camss.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm SDM670 Camera Subsystem (CAMSS)
> +
> +maintainers:
> +  - Richard Acayan <mailingradian@gmail.com>
> +
> +description:
> +  The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms.
> +
> +properties:
> +  compatible:
> +    const: qcom,sdm670-camss
> +
> +  clocks:
> +    maxItems: 33
> +
> +  clock-names:
> +    items:
> +      - const: camnoc_axi
> +      - const: cpas_ahb
> +      - const: cphy_rx_src
> +      - const: csi0
> +      - const: csi0_src

These "_src" clocks should be dropped.

> +      - const: csi1
> +      - const: csi1_src
> +      - const: csi2
> +      - const: csi2_src
> +      - const: csiphy0
> +      - const: csiphy0_timer
> +      - const: csiphy0_timer_src
> +      - const: csiphy1
> +      - const: csiphy1_timer
> +      - const: csiphy1_timer_src
> +      - const: csiphy2
> +      - const: csiphy2_timer
> +      - const: csiphy2_timer_src
> +      - const: gcc_camera_ahb
> +      - const: gcc_camera_axi
> +      - const: slow_ahb_src
> +      - const: soc_ahb
> +      - const: vfe0_axi
> +      - const: vfe0
> +      - const: vfe0_cphy_rx
> +      - const: vfe0_src
> +      - const: vfe1_axi
> +      - const: vfe1
> +      - const: vfe1_cphy_rx
> +      - const: vfe1_src
> +      - const: vfe_lite
> +      - const: vfe_lite_cphy_rx
> +      - const: vfe_lite_src
> +
> +  interrupts:
> +    maxItems: 9
> +
> +  interrupt-names:
> +    items:
> +      - const: csid0
> +      - const: csid1
> +      - const: csid2
> +      - const: csiphy0
> +      - const: csiphy1
> +      - const: csiphy2
> +      - const: vfe0
> +      - const: vfe1
> +      - const: vfe_lite
> +
> +  iommus:
> +    maxItems: 4
> +
> +  power-domains:
> +    items:
> +      - description: IFE0 GDSC - Image Front End, Global Distributed Switch Controller.
> +      - description: IFE1 GDSC - Image Front End, Global Distributed Switch Controller.
> +      - description: Titan Top GDSC - Titan ISP Block, Global Distributed Switch Controller.
> +
> +  power-domain-names:
> +    items:
> +      - const: ife0
> +      - const: ife1
> +      - const: top

Named power domains, maith on fear.

Provided you fix the above and Krzysztof is happy, you can add my

Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>

---
bod
Rob Herring (Arm) Aug. 6, 2024, 11:38 p.m. UTC | #2
On Tue, 06 Aug 2024 18:42:23 -0400, Richard Acayan wrote:
> Add the camera subsystem for the Snapdragon 670.
> 
> Adapted from SC8280XP camera subsystem.
> 
> Signed-off-by: Richard Acayan <mailingradian@gmail.com>
> ---
>  .../bindings/media/qcom,sdm670-camss.yaml     | 353 ++++++++++++++++++
>  1 file changed, 353 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/qcom,sdm670-camss.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Error: Documentation/devicetree/bindings/media/qcom,sdm670-camss.example.dts:50.31-32 syntax error
FATAL ERROR: Unable to parse input tree
make[2]: *** [scripts/Makefile.lib:427: Documentation/devicetree/bindings/media/qcom,sdm670-camss.example.dtb] Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [/builds/robherring/dt-review-ci/linux/Makefile:1430: dt_binding_check] Error 2
make: *** [Makefile:240: __sub-make] Error 2

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240806224219.71623-9-mailingradian@gmail.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
Richard Acayan Aug. 7, 2024, 11:14 p.m. UTC | #3
On Tue, Aug 06, 2024 at 11:57:38PM +0100, Bryan O'Donoghue wrote:
> On 06/08/2024 23:42, Richard Acayan wrote:
>> Add the camera subsystem for the Snapdragon 670.
>> 
>> Adapted from SC8280XP camera subsystem.
>
> Hmm, I'd like a little bit more of a commit log here. sdm670 as found in
> "spiffy device X" contains N CSIDs, Y VFEs.
>
> Its not super important but a description that is device specific would be
> nice.

Ok.

>> 
>> Signed-off-by: Richard Acayan <mailingradian@gmail.com>
>> ---
>>   .../bindings/media/qcom,sdm670-camss.yaml     | 353 ++++++++++++++++++
>>   1 file changed, 353 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/media/qcom,sdm670-camss.yaml
>> 
>> diff --git a/Documentation/devicetree/bindings/media/qcom,sdm670-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sdm670-camss.yaml
>> new file mode 100644
>> index 000000000000..543fad1b5cd7
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/media/qcom,sdm670-camss.yaml
>> @@ -0,0 +1,353 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
>> +
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/media/qcom,sdm670-camss.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Qualcomm SDM670 Camera Subsystem (CAMSS)
>> +
>> +maintainers:
>> +  - Richard Acayan <mailingradian@gmail.com>
>> +
>> +description:
>> +  The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms.
>> +
>> +properties:
>> +  compatible:
>> +    const: qcom,sdm670-camss
>> +
>> +  clocks:
>> +    maxItems: 33
>> +
>> +  clock-names:
>> +    items:
>> +      - const: camnoc_axi
>> +      - const: cpas_ahb
>> +      - const: cphy_rx_src
>> +      - const: csi0
>> +      - const: csi0_src
>
> These "_src" clocks should be dropped.

Hi, this will require dedicated definitions for SDM670 in the driver, as
SDM845 lists (and requires) the src clocks. It's certainly possible to
do so, but I'm just not sure if it's what you expected.

Or I could send an RFT to drop them from SDM845...
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/media/qcom,sdm670-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sdm670-camss.yaml
new file mode 100644
index 000000000000..543fad1b5cd7
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,sdm670-camss.yaml
@@ -0,0 +1,353 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/qcom,sdm670-camss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SDM670 Camera Subsystem (CAMSS)
+
+maintainers:
+  - Richard Acayan <mailingradian@gmail.com>
+
+description:
+  The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms.
+
+properties:
+  compatible:
+    const: qcom,sdm670-camss
+
+  clocks:
+    maxItems: 33
+
+  clock-names:
+    items:
+      - const: camnoc_axi
+      - const: cpas_ahb
+      - const: cphy_rx_src
+      - const: csi0
+      - const: csi0_src
+      - const: csi1
+      - const: csi1_src
+      - const: csi2
+      - const: csi2_src
+      - const: csiphy0
+      - const: csiphy0_timer
+      - const: csiphy0_timer_src
+      - const: csiphy1
+      - const: csiphy1_timer
+      - const: csiphy1_timer_src
+      - const: csiphy2
+      - const: csiphy2_timer
+      - const: csiphy2_timer_src
+      - const: gcc_camera_ahb
+      - const: gcc_camera_axi
+      - const: slow_ahb_src
+      - const: soc_ahb
+      - const: vfe0_axi
+      - const: vfe0
+      - const: vfe0_cphy_rx
+      - const: vfe0_src
+      - const: vfe1_axi
+      - const: vfe1
+      - const: vfe1_cphy_rx
+      - const: vfe1_src
+      - const: vfe_lite
+      - const: vfe_lite_cphy_rx
+      - const: vfe_lite_src
+
+  interrupts:
+    maxItems: 9
+
+  interrupt-names:
+    items:
+      - const: csid0
+      - const: csid1
+      - const: csid2
+      - const: csiphy0
+      - const: csiphy1
+      - const: csiphy2
+      - const: vfe0
+      - const: vfe1
+      - const: vfe_lite
+
+  iommus:
+    maxItems: 4
+
+  power-domains:
+    items:
+      - description: IFE0 GDSC - Image Front End, Global Distributed Switch Controller.
+      - description: IFE1 GDSC - Image Front End, Global Distributed Switch Controller.
+      - description: Titan Top GDSC - Titan ISP Block, Global Distributed Switch Controller.
+
+  power-domain-names:
+    items:
+      - const: ife0
+      - const: ife1
+      - const: top
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    description:
+      CSI input ports.
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data from CSIPHY0.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data from CSIPHY1.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@2:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data from CSIPHY2.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+  reg:
+    maxItems: 9
+
+  reg-names:
+    items:
+      - const: csid0
+      - const: csid1
+      - const: csid2
+      - const: vfe0
+      - const: csiphy0
+      - const: vfe1
+      - const: csiphy1
+      - const: vfe_lite
+      - const: csiphy2
+
+  vdda-phy-supply:
+    description:
+      Phandle to a regulator supply to PHY core block.
+
+  vdda-pll-supply:
+    description:
+      Phandle to 1.8V regulator supply to PHY refclk pll block.
+
+required:
+  - clock-names
+  - clocks
+  - compatible
+  - interconnects
+  - interconnect-names
+  - interrupts
+  - interrupt-names
+  - iommus
+  - power-domains
+  - power-domain-names
+  - reg
+  - reg-names
+  - vdda-phy-supply
+  - vdda-pll-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        camss {
+            compatible = "qcom,sdm670-camss";
+
+            reg = <0 0x0ac65000 0 0x1000>,
+                  <0 0x0ac66000 0 0x1000>,
+                  <0 0x0ac67000 0 0x1000>,
+                  <0 0x0acaf000 0 0x4000>,
+                  <0 0x0acb3000 0 0x1000>,
+                  <0 0x0acb6000 0 0x4000>,
+                  <0 0x0acba000 0 0x1000>,
+                  <0 0x0acc4000 0 0x4000>,
+                  <0 0x0acc8000 0 0x1000>;
+            reg-names = "csiphy0",
+                        "csiphy1",
+                        "csiphy2",
+                        "vfe0",
+                        "csid0",
+                        "vfe1",
+                        "csid1",
+                        "vfe_lite",
+                        "csid2";
+
+            interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "csid0",
+                              "csid1",
+                              "csid2",
+                              "csiphy0",
+                              "csiphy1",
+                              "csiphy2",
+                              "vfe0",
+                              "vfe1",
+                              "vfe_lite";
+
+            clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+                     <&camcc CAM_CC_CPAS_AHB_CLK>,
+                     <&camcc CAM_CC_CPHY_RX_CLK_SRC>,
+                     <&camcc CAM_CC_IFE_0_CSID_CLK>,
+                     <&camcc CAM_CC_IFE_0_CSID_CLK_SRC>,
+                     <&camcc CAM_CC_IFE_1_CSID_CLK>,
+                     <&camcc CAM_CC_IFE_1_CSID_CLK_SRC>,
+                     <&camcc CAM_CC_IFE_LITE_CSID_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_CSID_CLK_SRC>,
+                     <&camcc CAM_CC_CSIPHY0_CLK>,
+                     <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSI0PHYTIMER_CLK_SRC>,
+                     <&camcc CAM_CC_CSIPHY1_CLK>,
+                     <&camcc CAM_CC_CSI1PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSI1PHYTIMER_CLK_SRC>,
+                     <&camcc CAM_CC_CSIPHY2_CLK>,
+                     <&camcc CAM_CC_CSI2PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSI2PHYTIMER_CLK_SRC>,
+                     <&gcc GCC_CAMERA_AHB_CLK>,
+                     <&gcc GCC_CAMERA_AXI_CLK>,
+                     <&camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+                     <&camcc CAM_CC_SOC_AHB_CLK>,
+                     <&camcc CAM_CC_IFE_0_AXI_CLK>,
+                     <&camcc CAM_CC_IFE_0_CLK>,
+                     <&camcc CAM_CC_IFE_0_CPHY_RX_CLK>,
+                     <&camcc CAM_CC_IFE_0_CLK_SRC>,
+                     <&camcc CAM_CC_IFE_1_AXI_CLK>,
+                     <&camcc CAM_CC_IFE_1_CLK>,
+                     <&camcc CAM_CC_IFE_1_CPHY_RX_CLK>,
+                     <&camcc CAM_CC_IFE_1_CLK_SRC>,
+                     <&camcc CAM_CC_IFE_LITE_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_CLK_SRC>;
+            clock-names = "camnoc_axi",
+                          "cpas_ahb",
+                          "cphy_rx_src",
+                          "csi0",
+                          "csi0_src",
+                          "csi1",
+                          "csi1_src",
+                          "csi2",
+                          "csi2_src",
+                          "csiphy0",
+                          "csiphy0_timer",
+                          "csiphy0_timer_src",
+                          "csiphy1",
+                          "csiphy1_timer",
+                          "csiphy1_timer_src",
+                          "csiphy2",
+                          "csiphy2_timer",
+                          "csiphy2_timer_src",
+                          "gcc_camera_ahb",
+                          "gcc_camera_axi",
+                          "slow_ahb_src",
+                          "soc_ahb",
+                          "vfe0_axi",
+                          "vfe0",
+                          "vfe0_cphy_rx",
+                          "vfe0_src",
+                          "vfe1_axi",
+                          "vfe1",
+                          "vfe1_cphy_rx",
+                          "vfe1_src",
+                          "vfe_lite",
+                          "vfe_lite_cphy_rx",
+                          "vfe_lite_src";
+
+            iommus = <&apps_smmu 0x808 0x0>,
+                     <&apps_smmu 0x810 0x8>,
+                     <&apps_smmu 0xc08 0x0>,
+                     <&apps_smmu 0xc10 0x8>;
+
+            power-domains = <&camcc IFE_0_GDSC>,
+                            <&camcc IFE_1_GDSC>,
+                            <&camcc TITAN_TOP_GDSC>;
+            power-domain-names = "ife0",
+                                 "ife1",
+                                 "top";
+
+            vdda-phy-supply = <&vreg_l1a_1p225>;
+            vdda-pll-supply = <&vreg_l8a_1p8>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    csiphy_ep0: endpoint {
+                        reg = <0>;
+                        clock-lanes = <7>;
+                        data-lanes = <0 1 2 3>;
+                        remote-endpoint = <&front_sensor_ep>;
+                    };
+                };
+            };
+        };
+    };