diff mbox series

[3/4] ASoC: dt-bindings: qcom,wcd938x: Correct reset GPIO polarity in example

Message ID 20240806114931.40090-3-krzysztof.kozlowski@linaro.org
State New
Headers show
Series [1/4] ASoC: dt-bindings: qcom,wcd937x: Correct reset GPIO polarity in example | expand

Commit Message

Krzysztof Kozlowski Aug. 6, 2024, 11:49 a.m. UTC 
The reset GPIO of WCD9380/WCD9385 is active low and that's how it is
routed on typical boards, so correct the example DTS to use expected
polarity.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml
index cf6c3787adfe..10531350c336 100644
--- a/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml
@@ -34,9 +34,10 @@  unevaluatedProperties: false
 
 examples:
   - |
+    #include <dt-bindings/gpio/gpio.h>
     codec {
         compatible = "qcom,wcd9380-codec";
-        reset-gpios = <&tlmm 32 0>;
+        reset-gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
         #sound-dai-cells = <1>;
         qcom,tx-device = <&wcd938x_tx>;
         qcom,rx-device = <&wcd938x_rx>;