| Message ID | 20240806114931.40090-3-krzysztof.kozlowski@linaro.org |
|---|---|
| State | New |
| Headers | show |
| Series | [1/4] ASoC: dt-bindings: qcom,wcd937x: Correct reset GPIO polarity in example | expand |
diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml index cf6c3787adfe..10531350c336 100644 --- a/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml @@ -34,9 +34,10 @@ unevaluatedProperties: false examples: - | + #include <dt-bindings/gpio/gpio.h> codec { compatible = "qcom,wcd9380-codec"; - reset-gpios = <&tlmm 32 0>; + reset-gpios = <&tlmm 32 GPIO_ACTIVE_LOW>; #sound-dai-cells = <1>; qcom,tx-device = <&wcd938x_tx>; qcom,rx-device = <&wcd938x_rx>;
The reset GPIO of WCD9380/WCD9385 is active low and that's how it is routed on typical boards, so correct the example DTS to use expected polarity. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)