Message ID | 20240813134729.284583-1-zhanghui31@xiaomi.com |
---|---|
State | New |
Headers | show |
Series | ufs: core: fix bus timeout in ufshcd_wl_resume flow | expand |
On 8/13/24 6:47 AM, ZhangHui wrote: > diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c > index 5e3c67e96956..e5e3e0277d43 100644 > --- a/drivers/ufs/core/ufshcd.c > +++ b/drivers/ufs/core/ufshcd.c > @@ -3291,6 +3291,8 @@ static int ufshcd_exec_dev_cmd(struct ufs_hba *hba, > struct ufshcd_lrb *lrbp = &hba->lrb[tag]; > int err; > > + if (hba->ufshcd_reg_state == UFSHCD_REG_RESET) > + return -EBUSY; > /* Protects use of hba->reserved_slot. */ > lockdep_assert_held(&hba->dev_cmd.lock); Does this change make ufshcd_exec_dev_cmd() unpredictable - it succeeds if the controller is in the normal state and fails if error recovery is ongoing? If so, which code paths does this affect and/or break? Additionally, I think the above check is racy. hba->ufshcd_reg_state may change after the above code checked it and before ufshcd_exec_dev_cmd() has finished. Wouldn't it be better to make code that shouldn't be executed while the error handler is ongoing wait until error handling has finished? Thanks, Bart.
On Tue, 2024-08-13 at 21:47 +0800, ZhangHui wrote: > From: zhanghui <zhanghui31@xiaomi.com> > > If the SSU CMD completion flow in UFS resume and the CMD timeout flow > occur > simultaneously, the timestamp attribute command will be sent to the > device > Hi Zhanghui, If the timeout command is SSU? In resume flow, if SSU command timeout, ufshcd_eh_host_reset_handler invoke ufshcd_link_recovery only, not schedule eh work? Thanks. Peter > during the UFS resume flow, while the UFS controller performs a reset > in > the timeout error handling flow. > > In this scenario, a bus timeout will occur because the UFS resume > flow > will attempt to access the UFS host controller registers while the > UFS > controller is in a reset state or power cycle. > > Call trace: > arm64_serror_panic+0x6c/0x94 > do_serror+0xbc/0xc8 > el1h_64_error_handler+0x34/0x48 > el1h_64_error+0x68/0x6c > _raw_spin_unlock+0x18/0x44 > ufshcd_send_command+0x1c0/0x380 > ufshcd_exec_dev_cmd+0x21c/0x29c > ufshcd_set_timestamp_attr+0x78/0xdc > __ufshcd_wl_resume+0x228/0x48c > ufshcd_wl_resume+0x5c/0x1b4 > scsi_bus_resume+0x58/0xa0 > dpm_run_callback+0x6c/0x23c > __device_resume+0x298/0x46c > async_resume+0x24/0x3c > async_run_entry_fn+0x44/0x150 > process_scheduled_works+0x254/0x4f4 > worker_thread+0x244/0x334 > kthread+0x124/0x1f0 > ret_from_fork+0x10/0x20 > > This patch fixes the issue by adding a check of the UFS controller > register states before sending the device command. > > Signed-off-by: zhanghui <zhanghui31@xiaomi.com> > --- > drivers/ufs/core/ufshcd.c | 14 ++++++++++++++ > include/ufs/ufshcd.h | 13 +++++++++++++ > 2 files changed, 27 insertions(+) > > diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c > index 5e3c67e96956..e5e3e0277d43 100644 > --- a/drivers/ufs/core/ufshcd.c > +++ b/drivers/ufs/core/ufshcd.c > @@ -3291,6 +3291,8 @@ static int ufshcd_exec_dev_cmd(struct ufs_hba > *hba, > struct ufshcd_lrb *lrbp = &hba->lrb[tag]; > int err; > > + if (hba->ufshcd_reg_state == UFSHCD_REG_RESET) > + return -EBUSY; > /* Protects use of hba->reserved_slot. */ > lockdep_assert_held(&hba->dev_cmd.lock); > > @@ -4857,6 +4859,7 @@ static int ufshcd_hba_execute_hce(struct > ufs_hba *hba) > int ufshcd_hba_enable(struct ufs_hba *hba) > { > int ret; > + unsigned long flags; > > if (hba->quirks & UFSHCI_QUIRK_BROKEN_HCE) { > ufshcd_set_link_off(hba); > @@ -4881,6 +4884,13 @@ int ufshcd_hba_enable(struct ufs_hba *hba) > ret = ufshcd_hba_execute_hce(hba); > } > > + spin_lock_irqsave(hba->host->host_lock, flags); > + if (ret) > + hba->ufshcd_reg_state = UFSHCD_REG_RESET; > + else > + hba->ufshcd_reg_state = UFSHCD_REG_OPERATIONAL; > + spin_unlock_irqrestore(hba->host->host_lock, flags); > + > return ret; > } > EXPORT_SYMBOL_GPL(ufshcd_hba_enable); > @@ -7693,7 +7703,11 @@ static int ufshcd_abort(struct scsi_cmnd *cmd) > static int ufshcd_host_reset_and_restore(struct ufs_hba *hba) > { > int err; > + unsigned long flags; > > + spin_lock_irqsave(hba->host->host_lock, flags); > + hba->ufshcd_reg_state = UFSHCD_REG_RESET; > + spin_unlock_irqrestore(hba->host->host_lock, flags); > /* > * Stop the host controller and complete the requests > * cleared by h/w > diff --git a/include/ufs/ufshcd.h b/include/ufs/ufshcd.h > index cac0cdb9a916..e5af4c2114ce 100644 > --- a/include/ufs/ufshcd.h > +++ b/include/ufs/ufshcd.h > @@ -523,6 +523,18 @@ enum ufshcd_state { > UFSHCD_STATE_ERROR, > }; > > +/** > + * enum ufshcd_state - UFS host controller state > + * @UFSHCD_REG_OPERATIONAL: UFS host controller is enabled, the host > controller > + * register can be accessed. > + * @UFSHCD_REG_RESET: UFS host controller registers will be reset, > can't access > + * any ufs host controller register. > + */ > +enum ufshcd_reg_state { > + UFSHCD_REG_OPERATIONAL, > + UFSHCD_REG_RESET, > +}; > + > enum ufshcd_quirks { > /* Interrupt aggregation support is broken */ > UFSHCD_QUIRK_BROKEN_INTR_AGGR = 1 << 0, > @@ -1020,6 +1032,7 @@ struct ufs_hba { > struct completion *uic_async_done; > > enum ufshcd_state ufshcd_state; > + enum ufshcd_reg_state ufshcd_reg_state; > u32 eh_flags; > u32 intr_mask; > u16 ee_ctrl_mask;
On 2024/8/14 9:41, Bart Van Assche wrote: > On 8/13/24 6:47 AM, ZhangHui wrote: >> diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c >> index 5e3c67e96956..e5e3e0277d43 100644 >> --- a/drivers/ufs/core/ufshcd.c >> +++ b/drivers/ufs/core/ufshcd.c >> @@ -3291,6 +3291,8 @@ static int ufshcd_exec_dev_cmd(struct ufs_hba >> *hba, >> struct ufshcd_lrb *lrbp = &hba->lrb[tag]; >> int err; >> >> + if (hba->ufshcd_reg_state == UFSHCD_REG_RESET) >> + return -EBUSY; >> /* Protects use of hba->reserved_slot. */ >> lockdep_assert_held(&hba->dev_cmd.lock); > > Does this change make ufshcd_exec_dev_cmd() unpredictable - it succeeds > if the controller is in the normal state and fails if error recovery > is ongoing? If so, which code paths does this affect and/or break? > > Additionally, I think the above check is racy. hba->ufshcd_reg_state may > change after the above code checked it and before ufshcd_exec_dev_cmd() > has finished. Wouldn't it be better to make code that shouldn't be > executed while the error handler is ongoing wait until error handling > has finished? > > Thanks, > > Bart. > hi Bart, 1. If the host needs to send a dev command, the HBA must be enabled. We have set the ufshcd_reg_state to operational in the ufshcd_hba_enable, so it is not unpredictable. 2. That's a good question, but I think it makes sense to block dev cmd while ufs is doing a reset. Thanks Zhanghui
On 2024/8/14 14:39, Peter Wang (王信友) wrote: > On Tue, 2024-08-13 at 21:47 +0800, ZhangHui wrote: >> From: zhanghui <zhanghui31@xiaomi.com> >> >> If the SSU CMD completion flow in UFS resume and the CMD timeout flow >> occur >> simultaneously, the timestamp attribute command will be sent to the >> device >> > Hi Zhanghui, > > If the timeout command is SSU? > In resume flow, if SSU command timeout, ufshcd_eh_host_reset_handler > invoke ufshcd_link_recovery only, not schedule eh work? > > > Thanks. > Peter hi Peter G, ufshcd_link_recovery calls ufshcd_host_reset_and_restore to power cycle and reset the host controller. Thanks Zhanghui
diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c index 5e3c67e96956..e5e3e0277d43 100644 --- a/drivers/ufs/core/ufshcd.c +++ b/drivers/ufs/core/ufshcd.c @@ -3291,6 +3291,8 @@ static int ufshcd_exec_dev_cmd(struct ufs_hba *hba, struct ufshcd_lrb *lrbp = &hba->lrb[tag]; int err; + if (hba->ufshcd_reg_state == UFSHCD_REG_RESET) + return -EBUSY; /* Protects use of hba->reserved_slot. */ lockdep_assert_held(&hba->dev_cmd.lock); @@ -4857,6 +4859,7 @@ static int ufshcd_hba_execute_hce(struct ufs_hba *hba) int ufshcd_hba_enable(struct ufs_hba *hba) { int ret; + unsigned long flags; if (hba->quirks & UFSHCI_QUIRK_BROKEN_HCE) { ufshcd_set_link_off(hba); @@ -4881,6 +4884,13 @@ int ufshcd_hba_enable(struct ufs_hba *hba) ret = ufshcd_hba_execute_hce(hba); } + spin_lock_irqsave(hba->host->host_lock, flags); + if (ret) + hba->ufshcd_reg_state = UFSHCD_REG_RESET; + else + hba->ufshcd_reg_state = UFSHCD_REG_OPERATIONAL; + spin_unlock_irqrestore(hba->host->host_lock, flags); + return ret; } EXPORT_SYMBOL_GPL(ufshcd_hba_enable); @@ -7693,7 +7703,11 @@ static int ufshcd_abort(struct scsi_cmnd *cmd) static int ufshcd_host_reset_and_restore(struct ufs_hba *hba) { int err; + unsigned long flags; + spin_lock_irqsave(hba->host->host_lock, flags); + hba->ufshcd_reg_state = UFSHCD_REG_RESET; + spin_unlock_irqrestore(hba->host->host_lock, flags); /* * Stop the host controller and complete the requests * cleared by h/w diff --git a/include/ufs/ufshcd.h b/include/ufs/ufshcd.h index cac0cdb9a916..e5af4c2114ce 100644 --- a/include/ufs/ufshcd.h +++ b/include/ufs/ufshcd.h @@ -523,6 +523,18 @@ enum ufshcd_state { UFSHCD_STATE_ERROR, }; +/** + * enum ufshcd_state - UFS host controller state + * @UFSHCD_REG_OPERATIONAL: UFS host controller is enabled, the host controller + * register can be accessed. + * @UFSHCD_REG_RESET: UFS host controller registers will be reset, can't access + * any ufs host controller register. + */ +enum ufshcd_reg_state { + UFSHCD_REG_OPERATIONAL, + UFSHCD_REG_RESET, +}; + enum ufshcd_quirks { /* Interrupt aggregation support is broken */ UFSHCD_QUIRK_BROKEN_INTR_AGGR = 1 << 0, @@ -1020,6 +1032,7 @@ struct ufs_hba { struct completion *uic_async_done; enum ufshcd_state ufshcd_state; + enum ufshcd_reg_state ufshcd_reg_state; u32 eh_flags; u32 intr_mask; u16 ee_ctrl_mask;