@@ -779,6 +779,8 @@ EXPORT_SYMBOL(drm_atomic_helper_bridge_duplicate_state);
void drm_atomic_helper_bridge_destroy_state(struct drm_bridge *bridge,
struct drm_bridge_state *state)
{
+ kfree(state->input_bus_cfg.lanes);
+ kfree(state->output_bus_cfg.lanes);
kfree(state);
}
EXPORT_SYMBOL(drm_atomic_helper_bridge_destroy_state);
@@ -822,6 +822,40 @@ void drm_atomic_bridge_chain_enable(struct drm_bridge *bridge,
}
EXPORT_SYMBOL(drm_atomic_bridge_chain_enable);
+/**
+ * drm_bridge_next_bridge_lane_cfg - get the lane configuration of the next bridge
+ * @bridge: bridge control structure
+ * @state: new atomic state
+ * @num_lanes: will contain the size of the returned array
+ *
+ * This function is typically called from &drm_bridge_funcs.atomic_check().
+ * The @bridge driver calls this function to determine what the next bridge in
+ * the bridge chain requires for the physical to logical lane assignments.
+ *
+ * Return: Lane configuration array of size @num_lanes for the next bridge
+ * after @bridge in the bridge chain, or NULL if the lane configuration is
+ * unchanged from the default.
+ */
+const struct drm_lane_cfg *
+drm_bridge_next_bridge_lane_cfg(struct drm_bridge *bridge,
+ struct drm_atomic_state *state,
+ u8 *num_lanes)
+{
+ const struct drm_bridge_state *next_bridge_state;
+ struct drm_bridge *next_bridge = drm_bridge_get_next_bridge(bridge);
+
+ next_bridge_state = drm_atomic_get_new_bridge_state(state, next_bridge);
+ if (!next_bridge_state) {
+ *num_lanes = 0;
+ return NULL;
+ }
+
+ *num_lanes = next_bridge_state->input_bus_cfg.num_lanes;
+
+ return next_bridge_state->input_bus_cfg.lanes;
+}
+EXPORT_SYMBOL(drm_bridge_next_bridge_lane_cfg);
+
static int drm_atomic_bridge_check(struct drm_bridge *bridge,
struct drm_crtc_state *crtc_state,
struct drm_connector_state *conn_state)
@@ -1122,6 +1122,27 @@ drm_atomic_crtc_effectively_active(const struct drm_crtc_state *state)
return state->active || state->self_refresh_active;
}
+/**
+ * struct drm_lane_cfg - lane configuration
+ *
+ * This structure stores the lane configuration of a physical bus between
+ * two components in an output pipeline, usually between two bridges, an
+ * encoder and a bridge, or a bridge and a connector.
+ *
+ * The lane configuration is stored in &drm_bus_cfg.
+ */
+struct drm_lane_cfg {
+ /**
+ * @logical: Logical lane number
+ */
+ u8 logical;
+
+ /**
+ * @inverted: True if lane polarity is inverted, false otherwise
+ */
+ bool inverted;
+};
+
/**
* struct drm_bus_cfg - bus configuration
*
@@ -1152,6 +1173,16 @@ struct drm_bus_cfg {
* @flags: DRM_BUS_* flags used on this bus
*/
u32 flags;
+
+ /**
+ * @lanes: Lane mapping for this bus
+ */
+ struct drm_lane_cfg *lanes;
+
+ /**
+ * @num_lanes: Number of lanes in @lanes
+ */
+ u8 num_lanes;
};
/**
@@ -963,6 +963,10 @@ drm_atomic_helper_bridge_propagate_bus_fmt(struct drm_bridge *bridge,
struct drm_connector_state *conn_state,
u32 output_fmt,
unsigned int *num_input_fmts);
+const struct drm_lane_cfg *
+drm_bridge_next_bridge_lane_cfg(struct drm_bridge *bridge,
+ struct drm_atomic_state *state,
+ u8 *num_lanes);
enum drm_connector_status drm_bridge_detect(struct drm_bridge *bridge);
int drm_bridge_get_modes(struct drm_bridge *bridge,
Add support to the DRM atomic logic to support lane remapping between bridges, encoders and connectors. Typically lane mapping is handled statically in firmware, e.g. on DT we use the data-lanes property to assign lanes when connecting display bridges. Lane assignment is dynamic with USB-C DisplayPort altmodes, e.g. pin conf D assigns 2 lanes of DP to pins on the USB-C connector while pin conf C assigns 4 lanes of DP to pins on the USB-C connector. The lane assignment can't be set statically because the DP altmode repurposes USB-C pins for the DP lanes while also limiting the number of DP lanes or their pin assignment at runtime. Bridge drivers should point their 'struct drm_bus_cfg::lanes' pointer to an allocated array of 'struct drm_lane_cfg' structures and indicate the size of this allocated array with 'struct drm_bus_cfg::num_lanes' in their atomic_check() callback. The previous bridge in the bridge chain can look at this information by calling drm_bridge_next_bridge_lane_cfg() in their atomic_check() callback to figure out what lanes need to be logically assigned to the physical output lanes to satisfy the next bridge's lane assignment. Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Neil Armstrong <neil.armstrong@linaro.org> Cc: Robert Foss <rfoss@kernel.org> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: <dri-devel@lists.freedesktop.org> Cc: Pin-yen Lin <treapking@chromium.org> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> --- drivers/gpu/drm/drm_atomic_state_helper.c | 2 ++ drivers/gpu/drm/drm_bridge.c | 34 +++++++++++++++++++++++ include/drm/drm_atomic.h | 31 +++++++++++++++++++++ include/drm/drm_bridge.h | 4 +++ 4 files changed, 71 insertions(+)