diff mbox series

[3/4] phy: qualcomm: phy-qcom-ipq806x-sata: Convert to devm_clk_get_enabled()

Message ID 20240822084417.1596110-1-frank.li@vivo.com
State New
Headers show
Series [1/4] phy: ti: phy-dm816x-usb: Convert to devm_clk_get_prepared() | expand

Commit Message

李扬韬 Aug. 22, 2024, 8:44 a.m. UTC 
Convert devm_clk_get(), clk_prepare_enable() to a single
call to devm_clk_get_enabled(), as this is exactly
what this function does.

Signed-off-by: Yangtao Li <frank.li@vivo.com>
---
 drivers/phy/qualcomm/phy-qcom-ipq806x-sata.c | 22 ++++----------------
 1 file changed, 4 insertions(+), 18 deletions(-)

Comments

Dmitry Baryshkov Aug. 29, 2024, 8:08 a.m. UTC | #1 
On Thu, Aug 22, 2024 at 02:44:16AM GMT, Yangtao Li wrote:
> Convert devm_clk_get(), clk_prepare_enable() to a single
> call to devm_clk_get_enabled(), as this is exactly
> what this function does.
> 
> Signed-off-by: Yangtao Li <frank.li@vivo.com>
> ---
>  drivers/phy/qualcomm/phy-qcom-ipq806x-sata.c | 22 ++++----------------
>  1 file changed, 4 insertions(+), 18 deletions(-)
> 


Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
diff mbox series

Patch

diff --git a/drivers/phy/qualcomm/phy-qcom-ipq806x-sata.c b/drivers/phy/qualcomm/phy-qcom-ipq806x-sata.c
index f0a72b82c770..bf2d91c00700 100644
--- a/drivers/phy/qualcomm/phy-qcom-ipq806x-sata.c
+++ b/drivers/phy/qualcomm/phy-qcom-ipq806x-sata.c
@@ -17,7 +17,6 @@ 
 
 struct qcom_ipq806x_sata_phy {
 	void __iomem *mmio;
-	struct clk *cfg_clk;
 	struct device *dev;
 };
 
@@ -130,7 +129,7 @@  static int qcom_ipq806x_sata_phy_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct phy_provider *phy_provider;
 	struct phy *generic_phy;
-	int ret;
+	struct clk *cfg_clk;
 
 	phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
 	if (!phy)
@@ -150,19 +149,14 @@  static int qcom_ipq806x_sata_phy_probe(struct platform_device *pdev)
 	phy_set_drvdata(generic_phy, phy);
 	platform_set_drvdata(pdev, phy);
 
-	phy->cfg_clk = devm_clk_get(dev, "cfg");
-	if (IS_ERR(phy->cfg_clk)) {
+	cfg_clk = devm_clk_get_enabled(dev, "cfg");
+	if (IS_ERR(cfg_clk)) {
 		dev_err(dev, "Failed to get sata cfg clock\n");
-		return PTR_ERR(phy->cfg_clk);
+		return PTR_ERR(cfg_clk);
 	}
 
-	ret = clk_prepare_enable(phy->cfg_clk);
-	if (ret)
-		return ret;
-
 	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
 	if (IS_ERR(phy_provider)) {
-		clk_disable_unprepare(phy->cfg_clk);
 		dev_err(dev, "%s: failed to register phy\n", __func__);
 		return PTR_ERR(phy_provider);
 	}
@@ -170,13 +164,6 @@  static int qcom_ipq806x_sata_phy_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static void qcom_ipq806x_sata_phy_remove(struct platform_device *pdev)
-{
-	struct qcom_ipq806x_sata_phy *phy = platform_get_drvdata(pdev);
-
-	clk_disable_unprepare(phy->cfg_clk);
-}
-
 static const struct of_device_id qcom_ipq806x_sata_phy_of_match[] = {
 	{ .compatible = "qcom,ipq806x-sata-phy" },
 	{ },
@@ -185,7 +172,6 @@  MODULE_DEVICE_TABLE(of, qcom_ipq806x_sata_phy_of_match);
 
 static struct platform_driver qcom_ipq806x_sata_phy_driver = {
 	.probe	= qcom_ipq806x_sata_phy_probe,
-	.remove_new = qcom_ipq806x_sata_phy_remove,
 	.driver = {
 		.name	= "qcom-ipq806x-sata-phy",
 		.of_match_table	= qcom_ipq806x_sata_phy_of_match,