@@ -298,7 +298,7 @@ static int ufshcd_reset_and_restore(struct ufs_hba *hba);
static int ufshcd_eh_host_reset_handler(struct scsi_cmnd *cmd);
static int ufshcd_clear_tm_cmd(struct ufs_hba *hba, int tag);
static void ufshcd_hba_exit(struct ufs_hba *hba);
-static int ufshcd_device_init(struct ufs_hba *hba, bool init_dev_params);
+static int ufshcd_device_init(struct ufs_hba *hba);
static int ufshcd_probe_hba(struct ufs_hba *hba);
static int ufshcd_setup_clocks(struct ufs_hba *hba, bool on);
static inline void ufshcd_add_delay_before_dme_cmd(struct ufs_hba *hba);
@@ -7719,7 +7719,7 @@ static int ufshcd_host_reset_and_restore(struct ufs_hba *hba)
/* Establish the link again and restore the device */
if (!err) {
- err = ufshcd_device_init(hba, /*init_dev_params=*/false);
+ err = ufshcd_device_init(hba);
if (!err)
err = ufshcd_probe_hba(hba);
}
@@ -8795,9 +8795,8 @@ static int ufshcd_post_device_init(struct ufs_hba *hba)
return 0;
}
-static int ufshcd_device_init(struct ufs_hba *hba, bool init_dev_params)
+static int ufshcd_device_init(struct ufs_hba *hba)
{
- struct Scsi_Host *host = hba->host;
int ret;
ret = ufshcd_activate_link(hba);
@@ -8805,7 +8804,7 @@ static int ufshcd_device_init(struct ufs_hba *hba, bool init_dev_params)
return ret;
/* Reconfigure MCQ upon reset */
- if (hba->mcq_enabled && !init_dev_params) {
+ if (hba->mcq_enabled) {
ufshcd_config_mcq(hba);
ufshcd_mcq_enable(hba);
}
@@ -8820,39 +8819,6 @@ static int ufshcd_device_init(struct ufs_hba *hba, bool init_dev_params)
if (ret)
return ret;
- /*
- * Initialize UFS device parameters used by driver, these
- * parameters are associated with UFS descriptors.
- */
- if (init_dev_params) {
- ret = ufshcd_device_params_init(hba);
- if (ret)
- return ret;
- if (is_mcq_supported(hba) && !hba->scsi_host_added) {
- ufshcd_mcq_enable(hba);
- ret = ufshcd_alloc_mcq(hba);
- if (!ret) {
- ufshcd_config_mcq(hba);
- } else {
- /* Continue with SDB mode */
- ufshcd_mcq_disable(hba);
- use_mcq_mode = false;
- dev_err(hba->dev, "MCQ mode is disabled, err=%d\n",
- ret);
- }
- ret = scsi_add_host(host, hba->dev);
- if (ret) {
- dev_err(hba->dev, "scsi_add_host failed\n");
- return ret;
- }
- hba->scsi_host_added = true;
- } else if (is_mcq_supported(hba)) {
- /* UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH is set */
- ufshcd_config_mcq(hba);
- ufshcd_mcq_enable(hba);
- }
- }
-
return ufshcd_post_device_init(hba);
}
@@ -8886,7 +8852,7 @@ static int ufshcd_probe_hba(struct ufs_hba *hba)
}
/* Reinit the device */
- ret = ufshcd_device_init(hba, /*init_dev_params=*/false);
+ ret = ufshcd_device_init(hba);
if (ret)
goto out;
}
Both ufshcd_device_init() callers pass 'false' as second argument. Hence, remove that second argument. Signed-off-by: Bart Van Assche <bvanassche@acm.org> --- drivers/ufs/core/ufshcd.c | 44 +++++---------------------------------- 1 file changed, 5 insertions(+), 39 deletions(-)