Message ID | 20240822152801.602318-12-claudiu.beznea.uj@bp.renesas.com |
---|---|
State | New |
Headers | show |
Series | Add initial USB support for the Renesas RZ/G3S SoC | expand |
On Thu, Aug 22, 2024 at 5:28 PM Claudiu <claudiu.beznea@tuxon.dev> wrote: > From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> > > Document the RZ/G3S PHY bindings. The RZ/G3S USB PHY is almost identical > with the RZ/G2L USB PHY. The difference is that there is a hardware > limitation on the max burst size used when the BUS master interface > issues a transfer request for RZ/G3S that is configured though PHY > registers. > > Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Gr{oetje,eeting}s, Geert
diff --git a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml index f82649a55e91..af275cea3456 100644 --- a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml +++ b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml @@ -13,7 +13,9 @@ properties: compatible: oneOf: - items: - - const: renesas,usb2-phy-r8a77470 # RZ/G1C + - enum: + - renesas,usb2-phy-r8a77470 # RZ/G1C + - renesas,usb2-phy-r9a08g045 # RZ/G3S - items: - enum: