diff mbox series

[v3,5/5] wifi: wilc1000: Add WILC3000 support

Message ID 20240827164042.53698-5-marex@denx.de
State Superseded
Headers show
Series [v3,1/5] dt-bindings: wireless: wilc1000: Document WILC3000 compatible string | expand

Commit Message

Marek Vasut Aug. 27, 2024, 4:37 p.m. UTC
From: Ajay Singh <ajay.kathat@microchip.com>

Add support for the WILC3000 chip. The chip is similar to WILC1000,
except that the register layout is slightly different and it does
not support WPA3/SAE.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Marek Vasut <marex@denx.de>
---
Note: Squashed and updated from the following downstream patches:
wifi: wilc1000: wilc3000 support added
wifi: wilc1000: wilc3000 interrupt handling
wifi: wilc1000: wilc3000 added chip wake and sleep support
wifi: wilc1000: wilc3000 FW file sepecific changes
---
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Adham Abozaeid <adham.abozaeid@microchip.com>
Cc: Ajay Singh <ajay.kathat@microchip.com>
Cc: Alexis Lothoré <alexis.lothore@bootlin.com>
Cc: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: Marek Vasut <marex@denx.de>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
---
V2: - Return -EINVAL in wilc_sdio_init() if chip ID is not supported
    - Dispose of wilc_chip_type, replace with is_wilc1000()/is_wilc3000()
    - Remove wilc3000 DT compatible string handling, match on wilc1000 only,
      the device type can be auto-detected based on chipID
V3: - Define and use WILC3000_BOOTROM_STATUS and WILC3000_CORTUS_BOOT_REGISTER_2
---
 .../wireless/microchip/wilc1000/cfg80211.c    |   7 +
 .../net/wireless/microchip/wilc1000/netdev.c  |  29 ++-
 .../net/wireless/microchip/wilc1000/sdio.c    |  62 ++++-
 drivers/net/wireless/microchip/wilc1000/spi.c |   2 +-
 .../net/wireless/microchip/wilc1000/wlan.c    | 220 +++++++++++++++---
 .../net/wireless/microchip/wilc1000/wlan.h    |  45 +++-
 6 files changed, 303 insertions(+), 62 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/wireless/microchip/wilc1000/cfg80211.c b/drivers/net/wireless/microchip/wilc1000/cfg80211.c
index eb37b228d54ea..69c66a7b41654 100644
--- a/drivers/net/wireless/microchip/wilc1000/cfg80211.c
+++ b/drivers/net/wireless/microchip/wilc1000/cfg80211.c
@@ -313,6 +313,13 @@  static int connect(struct wiphy *wiphy, struct net_device *dev,
 
 	vif->connecting = true;
 
+	if (sme->auth_type == NL80211_AUTHTYPE_SAE &&
+	    is_wilc3000(vif->wilc->chipid)) {
+		netdev_err(dev, "WILC3000: WPA3 not supported\n");
+		ret = -EOPNOTSUPP;
+		goto out_error;
+	}
+
 	cipher_group = sme->crypto.cipher_group;
 	if (cipher_group != 0) {
 		if (sme->crypto.wpa_versions & NL80211_WPA_VERSION_2) {
diff --git a/drivers/net/wireless/microchip/wilc1000/netdev.c b/drivers/net/wireless/microchip/wilc1000/netdev.c
index 9ecf3fb29b558..178f3241cef9f 100644
--- a/drivers/net/wireless/microchip/wilc1000/netdev.c
+++ b/drivers/net/wireless/microchip/wilc1000/netdev.c
@@ -23,6 +23,12 @@ 
 #define __WILC1000_FW(api)		WILC1000_FW_PREFIX #api ".bin"
 #define WILC1000_FW(api)		__WILC1000_FW(api)
 
+#define WILC3000_API_VER		1
+
+#define WILC3000_FW_PREFIX		"atmel/wilc3000_wifi_firmware-"
+#define __WILC3000_FW(api)		WILC3000_FW_PREFIX #api ".bin"
+#define WILC3000_FW(api)		__WILC3000_FW(api)
+
 static irqreturn_t isr_uh_routine(int irq, void *user_data)
 {
 	struct wilc *wilc = user_data;
@@ -195,20 +201,24 @@  static int wilc_wlan_get_firmware(struct net_device *dev)
 {
 	struct wilc_vif *vif = netdev_priv(dev);
 	struct wilc *wilc = vif->wilc;
-	int chip_id;
 	const struct firmware *wilc_fw;
+	char *firmware;
 	int ret;
 
-	chip_id = wilc_get_chipid(wilc, false);
+	if (is_wilc1000(wilc->chipid))
+		firmware = WILC1000_FW(WILC1000_API_VER);
+	else if (is_wilc3000(wilc->chipid))
+		firmware = WILC3000_FW(WILC3000_API_VER);
+	else
+		return -EINVAL;
 
-	netdev_info(dev, "ChipID [%x] loading firmware [%s]\n", chip_id,
+	netdev_info(dev, "WILC%d loading firmware [%s]\n",
+		    is_wilc1000(wilc->chipid) ? 1000 : 3000,
 		    WILC1000_FW(WILC1000_API_VER));
 
-	ret = request_firmware(&wilc_fw, WILC1000_FW(WILC1000_API_VER),
-			       wilc->dev);
+	ret = request_firmware(&wilc_fw, firmware, wilc->dev);
 	if (ret != 0) {
-		netdev_err(dev, "%s - firmware not available\n",
-			   WILC1000_FW(WILC1000_API_VER));
+		netdev_err(dev, "%s - firmware not available\n", firmware);
 		return -EINVAL;
 	}
 	wilc->firmware = wilc_fw;
@@ -233,7 +243,7 @@  static int wilc_start_firmware(struct net_device *dev)
 	return 0;
 }
 
-static int wilc1000_firmware_download(struct net_device *dev)
+static int wilc_firmware_download(struct net_device *dev)
 {
 	struct wilc_vif *vif = netdev_priv(dev);
 	struct wilc *wilc = vif->wilc;
@@ -528,7 +538,7 @@  static int wilc_wlan_initialize(struct net_device *dev, struct wilc_vif *vif)
 		if (ret)
 			goto fail_irq_enable;
 
-		ret = wilc1000_firmware_download(dev);
+		ret = wilc_firmware_download(dev);
 		if (ret)
 			goto fail_irq_enable;
 
@@ -1014,3 +1024,4 @@  EXPORT_SYMBOL_GPL(wilc_netdev_ifc_init);
 MODULE_DESCRIPTION("Atmel WILC1000 core wireless driver");
 MODULE_LICENSE("GPL");
 MODULE_FIRMWARE(WILC1000_FW(WILC1000_API_VER));
+MODULE_FIRMWARE(WILC3000_FW(WILC3000_API_VER));
diff --git a/drivers/net/wireless/microchip/wilc1000/sdio.c b/drivers/net/wireless/microchip/wilc1000/sdio.c
index c26447289b71b..983debb3c626b 100644
--- a/drivers/net/wireless/microchip/wilc1000/sdio.c
+++ b/drivers/net/wireless/microchip/wilc1000/sdio.c
@@ -806,13 +806,19 @@  static int wilc_sdio_read_int(struct wilc *wilc, u32 *int_status)
 		cmd.address = WILC_SDIO_EXT_IRQ_FLAG_REG;
 	} else {
 		cmd.function = 0;
-		cmd.address = WILC_SDIO_IRQ_FLAG_REG;
+		cmd.address = is_wilc1000(wilc->chipid) ?
+			      WILC1000_SDIO_IRQ_FLAG_REG :
+			      WILC3000_SDIO_IRQ_FLAG_REG;
 	}
 	cmd.raw = 0;
 	cmd.read_write = 0;
 	cmd.data = 0;
 	wilc_sdio_cmd52(wilc, &cmd);
 	irq_flags = cmd.data;
+
+	if (sdio_priv->irq_gpio)
+		irq_flags &= is_wilc1000(wilc->chipid) ? 0x1f : 0x0f;
+
 	tmp |= FIELD_PREP(IRG_FLAGS_MASK, cmd.data);
 
 	if (FIELD_GET(UNHANDLED_IRQ_MASK, irq_flags))
@@ -834,22 +840,56 @@  static int wilc_sdio_clear_int_ext(struct wilc *wilc, u32 val)
 	if (sdio_priv->irq_gpio)
 		reg = val & (BIT(MAX_NUM_INT) - 1);
 
-	/* select VMM table 0 */
-	if (val & SEL_VMM_TBL0)
-		reg |= BIT(5);
-	/* select VMM table 1 */
-	if (val & SEL_VMM_TBL1)
-		reg |= BIT(6);
-	/* enable VMM */
-	if (val & EN_VMM)
-		reg |= BIT(7);
+	if (is_wilc1000(wilc->chipid)) {
+		/* select VMM table 0 */
+		if (val & SEL_VMM_TBL0)
+			reg |= BIT(5);
+		/* select VMM table 1 */
+		if (val & SEL_VMM_TBL1)
+			reg |= BIT(6);
+		/* enable VMM */
+		if (val & EN_VMM)
+			reg |= BIT(7);
+	} else {
+		if (sdio_priv->irq_gpio && reg) {
+			struct sdio_cmd52 cmd;
+
+			cmd.read_write = 1;
+			cmd.function = 0;
+			cmd.raw = 0;
+			cmd.address = WILC3000_SDIO_IRQ_FLAG_REG;
+			cmd.data = reg;
+
+			ret = wilc_sdio_cmd52(wilc, &cmd);
+			if (ret) {
+				dev_err(&func->dev,
+					"Failed cmd52, set 0xfe data (%d) ...\n",
+					__LINE__);
+				return ret;
+			}
+		}
+
+		reg = 0;
+		/* select VMM table 0 */
+		if (val & SEL_VMM_TBL0)
+			reg |= BIT(0);
+		/* select VMM table 1 */
+		if (val & SEL_VMM_TBL1)
+			reg |= BIT(1);
+		/* enable VMM */
+		if (val & EN_VMM)
+			reg |= BIT(2);
+	}
+
 	if (reg) {
 		struct sdio_cmd52 cmd;
 
 		cmd.read_write = 1;
 		cmd.function = 0;
 		cmd.raw = 0;
-		cmd.address = WILC_SDIO_IRQ_CLEAR_FLAG_REG;
+		cmd.address = is_wilc1000(wilc->chipid) ?
+			      WILC1000_SDIO_IRQ_CLEAR_FLAG_REG :
+			      WILC3000_SDIO_VMM_TBL_CTRL_REG;
 		cmd.data = reg;
 
 		ret = wilc_sdio_cmd52(wilc, &cmd);
diff --git a/drivers/net/wireless/microchip/wilc1000/spi.c b/drivers/net/wireless/microchip/wilc1000/spi.c
index 5ff940c53ad9c..8913703e10e26 100644
--- a/drivers/net/wireless/microchip/wilc1000/spi.c
+++ b/drivers/net/wireless/microchip/wilc1000/spi.c
@@ -1232,7 +1232,7 @@  static int wilc_validate_chipid(struct wilc *wilc)
 		dev_err(&spi->dev, "Fail cmd read chip id...\n");
 		return ret;
 	}
-	if (!is_wilc1000(chipid)) {
+	if (!is_wilc1000(chipid) && !is_wilc3000(chipid)) {
 		dev_err(&spi->dev, "Unknown chip id 0x%x\n", chipid);
 		return -ENODEV;
 	}
diff --git a/drivers/net/wireless/microchip/wilc1000/wlan.c b/drivers/net/wireless/microchip/wilc1000/wlan.c
index 01476f8ecc36f..721fc9c02de5c 100644
--- a/drivers/net/wireless/microchip/wilc1000/wlan.c
+++ b/drivers/net/wireless/microchip/wilc1000/wlan.c
@@ -541,7 +541,7 @@  static struct rxq_entry_t *wilc_wlan_rxq_remove(struct wilc *wilc)
 	return rqe;
 }
 
-static int chip_allow_sleep(struct wilc *wilc)
+static int chip_allow_sleep_wilc1000(struct wilc *wilc)
 {
 	u32 reg = 0;
 	const struct wilc_hif_func *hif_func = wilc->hif_func;
@@ -601,7 +601,41 @@  static int chip_allow_sleep(struct wilc *wilc)
 	return 0;
 }
 
-static int chip_wakeup(struct wilc *wilc)
+static int chip_allow_sleep_wilc3000(struct wilc *wilc)
+{
+	u32 reg = 0;
+	int ret;
+	const struct wilc_hif_func *hif_func = wilc->hif_func;
+
+	if (wilc->io_type == WILC_HIF_SDIO) {
+		ret = hif_func->hif_read_reg(wilc, WILC_SDIO_WAKEUP_REG, &reg);
+		if (ret)
+			return ret;
+		ret = hif_func->hif_write_reg(wilc, WILC_SDIO_WAKEUP_REG,
+					      reg & ~WILC_SDIO_WAKEUP_BIT);
+		if (ret)
+			return ret;
+	} else {
+		ret = hif_func->hif_read_reg(wilc, WILC_SPI_WAKEUP_REG, &reg);
+		if (ret)
+			return ret;
+		ret = hif_func->hif_write_reg(wilc, WILC_SPI_WAKEUP_REG,
+					      reg & ~WILC_SPI_WAKEUP_BIT);
+		if (ret)
+			return ret;
+	}
+	return 0;
+}
+
+static int chip_allow_sleep(struct wilc *wilc)
+{
+	if (is_wilc1000(wilc->chipid))
+		return chip_allow_sleep_wilc1000(wilc);
+	else
+		return chip_allow_sleep_wilc3000(wilc);
+}
+
+static int chip_wakeup_wilc1000(struct wilc *wilc)
 {
 	u32 ret = 0;
 	u32 clk_status_val = 0, trials = 0;
@@ -613,15 +647,15 @@  static int chip_wakeup(struct wilc *wilc)
 	if (wilc->io_type == WILC_HIF_SDIO) {
 		wakeup_reg = WILC_SDIO_WAKEUP_REG;
 		wakeup_bit = WILC_SDIO_WAKEUP_BIT;
-		clk_status_reg = WILC_SDIO_CLK_STATUS_REG;
-		clk_status_bit = WILC_SDIO_CLK_STATUS_BIT;
+		clk_status_reg = WILC1000_SDIO_CLK_STATUS_REG;
+		clk_status_bit = WILC1000_SDIO_CLK_STATUS_BIT;
 		from_host_to_fw_reg = WILC_SDIO_HOST_TO_FW_REG;
 		from_host_to_fw_bit = WILC_SDIO_HOST_TO_FW_BIT;
 	} else {
 		wakeup_reg = WILC_SPI_WAKEUP_REG;
 		wakeup_bit = WILC_SPI_WAKEUP_BIT;
-		clk_status_reg = WILC_SPI_CLK_STATUS_REG;
-		clk_status_bit = WILC_SPI_CLK_STATUS_BIT;
+		clk_status_reg = WILC1000_SPI_CLK_STATUS_REG;
+		clk_status_bit = WILC1000_SPI_CLK_STATUS_BIT;
 		from_host_to_fw_reg = WILC_SPI_HOST_TO_FW_REG;
 		from_host_to_fw_bit = WILC_SPI_HOST_TO_FW_BIT;
 	}
@@ -663,6 +697,74 @@  static int chip_wakeup(struct wilc *wilc)
 	return 0;
 }
 
+static int chip_wakeup_wilc3000(struct wilc *wilc)
+{
+	u32 wakeup_reg_val, clk_status_reg_val, trials = 0;
+	u32 wakeup_reg, wakeup_bit;
+	u32 clk_status_reg, clk_status_bit;
+	int wake_seq_trials = 5;
+	const struct wilc_hif_func *hif_func = wilc->hif_func;
+
+	if (wilc->io_type == WILC_HIF_SDIO) {
+		wakeup_reg = WILC_SDIO_WAKEUP_REG;
+		wakeup_bit = WILC_SDIO_WAKEUP_BIT;
+		clk_status_reg = WILC3000_SDIO_CLK_STATUS_REG;
+		clk_status_bit = WILC3000_SDIO_CLK_STATUS_BIT;
+	} else {
+		wakeup_reg = WILC_SPI_WAKEUP_REG;
+		wakeup_bit = WILC_SPI_WAKEUP_BIT;
+		clk_status_reg = WILC3000_SPI_CLK_STATUS_REG;
+		clk_status_bit = WILC3000_SPI_CLK_STATUS_BIT;
+	}
+
+	hif_func->hif_read_reg(wilc, wakeup_reg, &wakeup_reg_val);
+	do {
+		hif_func->hif_write_reg(wilc, wakeup_reg, wakeup_reg_val |
+							  wakeup_bit);
+		/* Check the clock status */
+		hif_func->hif_read_reg(wilc, clk_status_reg,
+				       &clk_status_reg_val);
+
+		/* In case of clocks off, wait 1ms, and check it again.
+		 * if still off, wait for another 1ms, for a total wait of 3ms.
+		 * If still off, redo the wake up sequence
+		 */
+		while ((clk_status_reg_val & clk_status_bit) == 0 &&
+		       (++trials % 4) != 0) {
+			/* Wait for the chip to stabilize*/
+			usleep_range(1000, 1100);
+
+			/* Make sure chip is awake. This is an extra step that
+			 * can be removed later to avoid the bus access
+			 * overhead
+			 */
+			hif_func->hif_read_reg(wilc, clk_status_reg,
+					       &clk_status_reg_val);
+		}
+		/* in case of failure, Reset the wakeup bit to introduce a new
+		 * edge on the next loop
+		 */
+		if ((clk_status_reg_val & clk_status_bit) == 0) {
+			hif_func->hif_write_reg(wilc, wakeup_reg,
+						wakeup_reg_val & (~wakeup_bit));
+			/* added wait before wakeup sequence retry */
+			usleep_range(200, 300);
+		}
+	} while ((clk_status_reg_val & clk_status_bit) == 0 && wake_seq_trials-- > 0);
+	if (!wake_seq_trials)
+		dev_err(wilc->dev, "clocks still OFF. Wake up failed\n");
+
+	return 0;
+}
+
+static int chip_wakeup(struct wilc *wilc)
+{
+	if (is_wilc1000(wilc->chipid))
+		return chip_wakeup_wilc1000(wilc);
+	else
+		return chip_wakeup_wilc3000(wilc);
+}
+
 static inline int acquire_bus(struct wilc *wilc, enum bus_acquire acquire)
 {
 	int ret = 0;
@@ -695,7 +797,9 @@  int host_wakeup_notify(struct wilc *wilc)
 	if (ret)
 		return ret;
 
-	wilc->hif_func->hif_write_reg(wilc, WILC_CORTUS_INTERRUPT_2, 1);
+	wilc->hif_func->hif_write_reg(wilc, is_wilc1000(wilc->chipid) ?
+					    WILC1000_CORTUS_INTERRUPT_2 :
+					    WILC3000_CORTUS_INTERRUPT_2, 1);
 	return release_bus(wilc, WILC_BUS_RELEASE_ALLOW_SLEEP);
 }
 EXPORT_SYMBOL_GPL(host_wakeup_notify);
@@ -707,7 +811,9 @@  int host_sleep_notify(struct wilc *wilc)
 	if (ret)
 		return ret;
 
-	wilc->hif_func->hif_write_reg(wilc, WILC_CORTUS_INTERRUPT_1, 1);
+	wilc->hif_func->hif_write_reg(wilc, is_wilc1000(wilc->chipid) ?
+					    WILC1000_CORTUS_INTERRUPT_1 :
+					    WILC3000_CORTUS_INTERRUPT_1, 1);
 	return release_bus(wilc, WILC_BUS_RELEASE_ALLOW_SLEEP);
 }
 EXPORT_SYMBOL_GPL(host_sleep_notify);
@@ -842,19 +948,45 @@  int wilc_wlan_handle_txq(struct wilc *wilc, u32 *txq_count)
 		if (ret)
 			break;
 
-		ret = func->hif_write_reg(wilc, WILC_HOST_VMM_CTL, 0x2);
-		if (ret)
-			break;
+		if (is_wilc1000(wilc->chipid)) {
+			ret = func->hif_write_reg(wilc, WILC_HOST_VMM_CTL, 0x2);
+			if (ret)
+				break;
 
-		do {
-			ret = func->hif_read_reg(wilc, WILC_HOST_VMM_CTL, &reg);
+			do {
+				ret = func->hif_read_reg(wilc, WILC_HOST_VMM_CTL, &reg);
+				if (ret)
+					break;
+				if (FIELD_GET(WILC_VMM_ENTRY_AVAILABLE, reg)) {
+					entries = FIELD_GET(WILC_VMM_ENTRY_COUNT, reg);
+					break;
+				}
+			} while (--timeout);
+		} else {
+			ret = func->hif_write_reg(wilc, WILC_HOST_VMM_CTL, 0);
 			if (ret)
 				break;
-			if (FIELD_GET(WILC_VMM_ENTRY_AVAILABLE, reg)) {
-				entries = FIELD_GET(WILC_VMM_ENTRY_COUNT, reg);
+
+			/* interrupt firmware */
+			ret = func->hif_write_reg(wilc, WILC_CORTUS_INTERRUPT_BASE, 1);
+			if (ret)
 				break;
-			}
-		} while (--timeout);
+
+			do {
+				ret = func->hif_read_reg(wilc, WILC_CORTUS_INTERRUPT_BASE, &reg);
+				if (ret)
+					break;
+				if (reg == 0) {
+					/* Get the entries */
+					ret = func->hif_read_reg(wilc, WILC_HOST_VMM_CTL, &reg);
+					if (ret)
+						break;
+
+					entries = FIELD_GET(WILC_VMM_ENTRY_COUNT, reg);
+					break;
+				}
+			} while (--timeout);
+		}
 		if (timeout <= 0) {
 			ret = func->hif_write_reg(wilc, WILC_HOST_VMM_CTL, 0x0);
 			break;
@@ -1212,6 +1344,9 @@  int wilc_wlan_start(struct wilc *wilc)
 	if (wilc->io_type == WILC_HIF_SDIO && wilc->dev_irq_num)
 		reg |= WILC_HAVE_SDIO_IRQ_GPIO;
 
+	if (is_wilc3000(wilc->chipid))
+		reg |= WILC_HAVE_SLEEP_CLK_SRC_RTC;
+
 	ret = wilc->hif_func->hif_write_reg(wilc, WILC_GP_REG_1, reg);
 	if (ret)
 		goto release;
@@ -1462,21 +1597,25 @@  static int wilc_get_chipid(struct wilc *wilc)
 	u32 rfrevid = 0;
 
 	if (wilc->chipid == 0) {
-		wilc->hif_func->hif_read_reg(wilc, WILC_CHIPID, &chipid);
-		wilc->hif_func->hif_read_reg(wilc, WILC_RF_REVISION_ID,
-					     &rfrevid);
-		if (!is_wilc1000(chipid)) {
-			wilc->chipid = 0;
-			return -EINVAL;
-		}
-		if (chipid == WILC_1000_BASE_ID_2A) { /* 0x1002A0 */
-			if (rfrevid != 0x1)
-				chipid = WILC_1000_BASE_ID_2A_REV1;
-		} else if (chipid == WILC_1000_BASE_ID_2B) { /* 0x1002B0 */
-			if (rfrevid == 0x4)
-				chipid = WILC_1000_BASE_ID_2B_REV1;
-			else if (rfrevid != 0x3)
-				chipid = WILC_1000_BASE_ID_2B_REV2;
+		wilc->hif_func->hif_read_reg(wilc, WILC3000_CHIP_ID, &chipid);
+		if (!is_wilc3000(chipid)) {
+			wilc->hif_func->hif_read_reg(wilc, WILC_CHIPID, &chipid);
+			wilc->hif_func->hif_read_reg(wilc, WILC_RF_REVISION_ID,
+						     &rfrevid);
+
+			if (!is_wilc1000(chipid)) {
+				wilc->chipid = 0;
+				return -EINVAL;
+			}
+			if (chipid == WILC_1000_BASE_ID_2A) { /* 0x1002A0 */
+				if (rfrevid != 0x1)
+					chipid = WILC_1000_BASE_ID_2A_REV1;
+			} else if (chipid == WILC_1000_BASE_ID_2B) { /* 0x1002B0 */
+				if (rfrevid == 0x4)
+					chipid = WILC_1000_BASE_ID_2B_REV1;
+				else if (rfrevid != 0x3)
+					chipid = WILC_1000_BASE_ID_2B_REV2;
+			}
 		}
 
 		wilc->chipid = chipid;
@@ -1525,6 +1664,21 @@  static int init_chip(struct net_device *dev)
 		}
 	}
 
+	if (is_wilc3000(wilc->chipid)) {
+		ret = wilc->hif_func->hif_read_reg(wilc, WILC3000_BOOTROM_STATUS, &reg);
+		if (ret) {
+			netdev_err(dev, "failed to read WILC3000 BootROM status register\n");
+			goto release;
+		}
+
+		ret = wilc->hif_func->hif_write_reg(wilc, WILC3000_CORTUS_BOOT_REGISTER_2,
+						    WILC_CORTUS_BOOT_FROM_IRAM);
+		if (ret) {
+			netdev_err(dev, "failed to write WILC3000 Boot register\n");
+			goto release;
+		}
+	}
+
 release:
 	rv = release_bus(wilc, WILC_BUS_RELEASE_ALLOW_SLEEP);
 
@@ -1606,7 +1760,7 @@  int wilc_wlan_init(struct net_device *dev)
 		if (ret)
 			goto fail;
 
-		if (!is_wilc1000(wilc->chipid)) {
+		if (!is_wilc1000(wilc->chipid) && !is_wilc3000(wilc->chipid)) {
 			netdev_err(dev, "Unsupported chipid: %x\n", wilc->chipid);
 			ret = -EINVAL;
 			goto fail;
diff --git a/drivers/net/wireless/microchip/wilc1000/wlan.h b/drivers/net/wireless/microchip/wilc1000/wlan.h
index 4e2b0c4ac1e21..8fcae9d14550c 100644
--- a/drivers/net/wireless/microchip/wilc1000/wlan.h
+++ b/drivers/net/wireless/microchip/wilc1000/wlan.h
@@ -96,8 +96,14 @@ 
 #define WILC_SPI_WAKEUP_REG		0x1
 #define WILC_SPI_WAKEUP_BIT		BIT(1)
 
-#define WILC_SPI_CLK_STATUS_REG        0x0f
-#define WILC_SPI_CLK_STATUS_BIT        BIT(2)
+/* WILC1000 specific */
+#define WILC1000_SPI_CLK_STATUS_REG	0x0f
+#define WILC1000_SPI_CLK_STATUS_BIT	BIT(2)
+
+/* WILC3000 specific */
+#define WILC3000_SPI_CLK_STATUS_REG	0x13
+#define WILC3000_SPI_CLK_STATUS_BIT	BIT(2)
+
 #define WILC_SPI_HOST_TO_FW_REG		0x0b
 #define WILC_SPI_HOST_TO_FW_BIT		BIT(0)
 
@@ -123,14 +129,24 @@ 
 #define WILC_SDIO_WAKEUP_REG		0xf0
 #define WILC_SDIO_WAKEUP_BIT		BIT(0)
 
-#define WILC_SDIO_CLK_STATUS_REG	0xf1
-#define WILC_SDIO_CLK_STATUS_BIT	BIT(0)
+/* WILC1000 */
+#define WILC1000_SDIO_CLK_STATUS_REG	0xf1
+#define WILC1000_SDIO_CLK_STATUS_BIT	BIT(0)
+
+#define WILC1000_SDIO_IRQ_FLAG_REG	0xf7
+#define WILC1000_SDIO_IRQ_CLEAR_FLAG_REG	0xf8
+
+/* WILC3000 specific */
+#define WILC3000_SDIO_CLK_STATUS_REG	0xf0 /* clk & wakeup are on same reg */
+#define WILC3000_SDIO_CLK_STATUS_BIT	BIT(4)
+
+#define WILC3000_SDIO_VMM_TBL_CTRL_REG	0xf1
+#define WILC3000_SDIO_IRQ_FLAG_REG	0xfe
 
+/* Common vendor specific CCCR register */
 #define WILC_SDIO_INTERRUPT_DATA_SZ_REG	0xf2 /* Read size (2 bytes) */
 
 #define WILC_SDIO_VMM_TBL_CTRL_REG	0xf6
-#define WILC_SDIO_IRQ_FLAG_REG		0xf7
-#define WILC_SDIO_IRQ_CLEAR_FLAG_REG	0xf8
 
 #define WILC_SDIO_HOST_TO_FW_REG	0xfa
 #define WILC_SDIO_HOST_TO_FW_BIT	BIT(0)
@@ -172,8 +188,11 @@ 
 #define WILC_HAVE_USE_IRQ_AS_HOST_WAKE	BIT(8)
 
 #define WILC_CORTUS_INTERRUPT_BASE	0x10A8
-#define WILC_CORTUS_INTERRUPT_1		(WILC_CORTUS_INTERRUPT_BASE + 0x4)
-#define WILC_CORTUS_INTERRUPT_2		(WILC_CORTUS_INTERRUPT_BASE + 0x8)
+#define WILC1000_CORTUS_INTERRUPT_1	(WILC_CORTUS_INTERRUPT_BASE + 0x4)
+#define WILC3000_CORTUS_INTERRUPT_1	(WILC_CORTUS_INTERRUPT_BASE + 0x14)
+
+#define WILC1000_CORTUS_INTERRUPT_2	(WILC_CORTUS_INTERRUPT_BASE + 0x8)
+#define WILC3000_CORTUS_INTERRUPT_2	(WILC_CORTUS_INTERRUPT_BASE + 0x18)
 
 /* tx control register 1 to 4 for RX */
 #define WILC_REG_4_TO_1_RX		0x1e1c
@@ -183,6 +202,9 @@ 
 
 #define WILC_CORTUS_RESET_MUX_SEL	0x1118
 #define WILC_CORTUS_BOOT_REGISTER	0xc0000
+#define WILC3000_BOOTROM_STATUS		0x207ac
+#define WILC3000_CORTUS_BOOT_REGISTER_2	0x4f0000
+#define WILC3000_CHIP_ID		0x3b0000
 
 #define WILC_CORTUS_BOOT_FROM_IRAM	0x71
 
@@ -195,6 +217,8 @@ 
 #define WILC_1000_BASE_ID_2B_REV1	(WILC_1000_BASE_ID_2B + 1)
 #define WILC_1000_BASE_ID_2B_REV2	(WILC_1000_BASE_ID_2B + 2)
 
+#define WILC_3000_BASE_ID		0x300000
+
 #define WILC_CHIP_REV_FIELD		GENMASK(11, 0)
 
 /********************************************
@@ -413,6 +437,11 @@  static inline bool is_wilc1000(u32 id)
 	return (id & (~WILC_CHIP_REV_FIELD)) == WILC_1000_BASE_ID;
 }
 
+static inline bool is_wilc3000(u32 id)
+{
+	return (id & (~WILC_CHIP_REV_FIELD)) == WILC_3000_BASE_ID;
+}
+
 int wilc_wlan_firmware_download(struct wilc *wilc, const u8 *buffer,
 				u32 buffer_size);
 int wilc_wlan_start(struct wilc *wilc);