diff mbox series

[1/4] arm64: dts: qcom: qcs6390-rb3gen2: use modem.mbn for modem DSP

Message ID 20240907-rb3g2-fixes-v1-1-eb9da98e9f80@linaro.org
State Accepted
Commit 6317aad0e1525f3e3609d9a0fea762a37799943a
Headers show
Series arm64: dts: qcom: qcs6490-rb3gen2: several small fixes | expand

Commit Message

Dmitry Baryshkov Sept. 7, 2024, 12:51 p.m. UTC
Newer boards should always use squashed MBN firmware instead of split
MDT+bNN. Use qcom/qcs6490/modem.mbn as the firmware for the modem on
RB3gen2.

Fixes: ac6d35b9b74c ("arm64: dts: qcom: qcs6490-rb3gen2: Enable various remoteprocs")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
index 0d45662b8028..5d0167fbc709 100644
--- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
+++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
@@ -707,7 +707,7 @@  &remoteproc_cdsp {
 };
 
 &remoteproc_mpss {
-	firmware-name = "qcom/qcs6490/modem.mdt";
+	firmware-name = "qcom/qcs6490/modem.mbn";
 	status = "okay";
 };