@@ -145,6 +145,14 @@ properties.
- status: Marks the node enabled/disabled.
+- domain-performance-state: A positive integer value representing the minimum
+ performance level (of the parent domain) required by the consumer for the
+ working of respective OPP. The integer value '1' represents the lowest
+ performance level and the highest value represents the highest performance
+ level. The consumer device node (which contains phandle to the OPP table in
+ its "operating-points-v2" property) should have its "power-domains" property
+ set as well.
+
Example 1: Single cluster Dual-core ARM cortex A9, switch DVFS states together.
/ {
@@ -517,3 +525,52 @@ Example 5: opp-supported-hw
};
};
};
+
+Example 7: domain-Performance-state:
+(example: For 1GHz require domain state 1 and for 1.1 & 1.2 GHz require state 2)
+
+/ {
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,cortex-a9";
+ reg = <0>;
+ next-level-cache = <&L2>;
+ clocks = <&clk_controller 0>;
+ clock-names = "cpu";
+ cpu-supply = <&cpu_supply0>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ power-domains = <&foo_pd>;
+ };
+ };
+
+ cpu0_opp_table: opp_table0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp@1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = <970000 975000 985000>;
+ opp-microamp = <70000>;
+ clock-latency-ns = <300000>;
+ opp-suspend;
+ domain-performance-state = <1>;
+ };
+ opp@1100000000 {
+ opp-hz = /bits/ 64 <1100000000>;
+ opp-microvolt = <980000 1000000 1010000>;
+ opp-microamp = <80000>;
+ clock-latency-ns = <310000>;
+ domain-performance-state = <2>;
+ };
+ opp@1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <1025000>;
+ clock-latency-ns = <290000>;
+ turbo-mode;
+ domain-performance-state = <2>;
+ };
+ };
+};
Some platforms have the capability to configure the performance state of their Power Domains. The performance levels are represented by positive integer values, a lower value represents lower performance state. If the consumers don't need the capability of switching to different domain performance states at runtime, then they can simply define their required domain performance state in their nodes directly. But if the device needs the capability of switching to different domain performance states, as they may need to support different clock rates, then the per OPP node can be used to contain that information. This patch introduces the domain-performance-state (already defined by Power Domain bindings) to the per OPP node. It can contain a single positive integer value. An example is also provided. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> --- Documentation/devicetree/bindings/opp/opp.txt | 57 +++++++++++++++++++++++++++ 1 file changed, 57 insertions(+) -- 2.7.1.410.g6faf27b -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html