diff mbox series

[v2] USB: serial: option: support for Quectel EG916Q-GL

Message ID 20240911085405.319899-1-benjamin@geanix.com
State New
Headers show
Series [v2] USB: serial: option: support for Quectel EG916Q-GL | expand

Commit Message

Benjamin B. Frost Sept. 11, 2024, 8:54 a.m. UTC 
Add Quectel EM916Q-GL with product ID 0x6007

T:  Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#=  3 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=2c7c ProdID=6007 Rev= 2.00
S:  Manufacturer=Quectel
S:  Product=EG916Q-GL
C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=200mA
A:  FirstIf#= 4 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=82(I) Atr=03(Int.) MxPS=  16 Ivl=32ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=84(I) Atr=03(Int.) MxPS=  16 Ivl=32ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=86(I) Atr=03(Int.) MxPS=  16 Ivl=32ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether
E:  Ad=88(I) Atr=03(Int.) MxPS=  32 Ivl=32ms
I:  If#= 5 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
I:* If#= 5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms


Signed-off-by: Benjamin B. Frost <benjamin@geanix.com>
---

V1 -> V2: Change as suggested by Lars has been implemented.
Using USB_DEVICE_AND_INTERFACE_INFO instead of USB_DEVICE.
Thank you for letting me know.

 drivers/usb/serial/option.c | 2 ++
 1 file changed, 2 insertions(+)

Comments

Johan Hovold Oct. 17, 2024, 2:36 p.m. UTC | #1 
On Wed, Sep 11, 2024 at 06:46:24PM +0700, Lars Melin wrote:
> On 2024-09-11 15:54, Benjamin B. Frost wrote:
> > Add Quectel EM916Q-GL with product ID 0x6007

> That was much better, now it is correct.
> Reviewed-by: Lars Melin <larsm17@gmail.com>

Thanks for reviewing, Lars.

> additional info
> MI_00 Quectel USB Diag Port
> MI_01 Quectel USB NMEA Port
> MI_02 Quectel USB AT Port
> MI_03 Quectel USB Modem Port
> MI_04 Quectel USB Net Port

Now applied with this interface info added to the commit message.

Johan
diff mbox series

Patch

diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 176f38750ad5..e47a12c81a2f 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -279,6 +279,7 @@  static void option_instat_callback(struct urb *urb);
 #define QUECTEL_PRODUCT_EG912Y			0x6001
 #define QUECTEL_PRODUCT_EC200S_CN		0x6002
 #define QUECTEL_PRODUCT_EC200A			0x6005
+#define QUECTEL_PRODUCT_EG916Q			0x6007
 #define QUECTEL_PRODUCT_EM061K_LWW		0x6008
 #define QUECTEL_PRODUCT_EM061K_LCN		0x6009
 #define QUECTEL_PRODUCT_EC200T			0x6026
@@ -1271,6 +1272,7 @@  static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200T, 0xff, 0, 0) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG912Y, 0xff, 0, 0) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500K, 0xff, 0x00, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG916Q, 0xff, 0x00, 0x00) },
 
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_300) },