@@ -18,16 +18,15 @@ properties:
description: prop-encoded-array <a b>
$ref: /schemas/types.yaml#/definitions/uint32-array
items:
- items:
- - description: Delay between rts signal and beginning of data sent in
- milliseconds. It corresponds to the delay before sending data.
- default: 0
- maximum: 100
- - description: Delay between end of data sent and rts signal in milliseconds.
- It corresponds to the delay after sending data and actual release
- of the line.
- default: 0
- maximum: 100
+ - description: Delay between rts signal and beginning of data sent in
+ milliseconds. It corresponds to the delay before sending data.
+ default: 0
+ maximum: 50
+ - description: Delay between end of data sent and rts signal in milliseconds.
+ It corresponds to the delay after sending data and actual release
+ of the line.
+ default: 0
+ maximum: 100
rs485-rts-active-high:
description: drive RTS high when sending (this is the default).
Code expects array only with 2 items which should be checked. But also item checking is not working as it should likely because of incorrect items description. Fixes: d50f974c4f7f ("dt-bindings: serial: Convert rs485 bindings to json-schema") Signed-off-by: Michal Simek <michal.simek@amd.com> Cc: <stable@vger.kernel.org> --- Changes in v2: - Remove maxItems properties which are not needed - Add stable ML to CC .../devicetree/bindings/serial/rs485.yaml | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-)