new file mode 100644
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/brcm,bcmbca-leds.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCMBCA LEDs
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+ The Broadcom BCA (Broadband Access) SoCs have a LED control
+ block that can support either parallel (directly connected)
+ LEDs or serial (connected to 1-4 shift registers) LEDs.
+ The LEDs can optionally be hardware-triggered by ethernet port
+ traffic.
+
+properties:
+ compatible:
+ const: brcm,bcmbca-leds
+
+ reg:
+ maxItems: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ brcm,serial-shifters:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ This describes the number of 8-bit serial shifters
+ connected to the LED controller block. If this property
+ is definied, it is implicit that the driver is using
+ serial LED control, if it is missing, parallel LED
+ control is assumed.
+
+patternProperties:
+ "^led@[0-9a-f]+$":
+ type: object
+ $ref: common.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ reg:
+ minimum: 0
+
+ required:
+ - reg
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/leds/common.h>
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ led-controller@800 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,bcmbca-leds";
+ reg = <0x800 0xc8>;
+
+ led@0 {
+ reg = <0>;
+ active-low;
+ function = "ext";
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led@1 {
+ reg = <1>;
+ active-low;
+ function = "ext";
+ color = <LED_COLOR_ID_AMBER>;
+ };
+ };
+ };
The Broadcom BCA (Broadband Access) SoCs contain a unique LED block. Add bindings for it. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- .../devicetree/bindings/leds/brcm,bcmbca-leds.yaml | 88 ++++++++++++++++++++++ 1 file changed, 88 insertions(+)