diff mbox series

[v1] input: misc: Correct typos in multiple comments across various files

Message ID 20240926075515.10042-1-shenlichuan@vivo.com
State Accepted
Commit 515ef92b4939fa51f9f1ee278618e2d419b0b8b0
Headers show
Series [v1] input: misc: Correct typos in multiple comments across various files | expand

Commit Message

Shen Lichuan Sept. 26, 2024, 7:55 a.m. UTC 
Fixed some confusing typos that were currently identified witch codespell,
the details are as follows:

-in the code comments:
drivers/input/misc/drv2665.c:18: Contol ==> Control
drivers/input/misc/drv2667.c:19: Contol ==> Control
drivers/input/misc/ideapad_slidebar.c:26: meaningfull ==> meaningful
drivers/input/misc/ims-pcu.c:742: bootoloader ==> bootloader
drivers/input/misc/kxtj9.c:28: funtion ==> function
drivers/input/misc/soc_button_array.c:518: indentical ==> identical
drivers/input/misc/wistron_btns.c:274: satelite ==> satellite
drivers/input/misc/yealink.c:380: singe ==> single
drivers/input/misc/yealink.c:617: coresponding ==> corresponding

Signed-off-by: Shen Lichuan <shenlichuan@vivo.com>
---
 drivers/input/misc/drv2665.c          | 2 +-
 drivers/input/misc/drv2667.c          | 2 +-
 drivers/input/misc/ideapad_slidebar.c | 2 +-
 drivers/input/misc/ims-pcu.c          | 2 +-
 drivers/input/misc/kxtj9.c            | 2 +-
 drivers/input/misc/soc_button_array.c | 2 +-
 drivers/input/misc/wistron_btns.c     | 2 +-
 drivers/input/misc/yealink.c          | 4 ++--
 8 files changed, 9 insertions(+), 9 deletions(-)

Comments

Dmitry Torokhov Sept. 30, 2024, 2:59 p.m. UTC | #1 
On Thu, Sep 26, 2024 at 03:55:15PM +0800, Shen Lichuan wrote:
> Fixed some confusing typos that were currently identified witch codespell,
> the details are as follows:
> 
> -in the code comments:
> drivers/input/misc/drv2665.c:18: Contol ==> Control
> drivers/input/misc/drv2667.c:19: Contol ==> Control
> drivers/input/misc/ideapad_slidebar.c:26: meaningfull ==> meaningful
> drivers/input/misc/ims-pcu.c:742: bootoloader ==> bootloader
> drivers/input/misc/kxtj9.c:28: funtion ==> function
> drivers/input/misc/soc_button_array.c:518: indentical ==> identical
> drivers/input/misc/wistron_btns.c:274: satelite ==> satellite
> drivers/input/misc/yealink.c:380: singe ==> single
> drivers/input/misc/yealink.c:617: coresponding ==> corresponding
> 
> Signed-off-by: Shen Lichuan <shenlichuan@vivo.com>

Applied, thank you.
diff mbox series

Patch

diff --git a/drivers/input/misc/drv2665.c b/drivers/input/misc/drv2665.c
index f98e4d765307..59ad69912bfd 100644
--- a/drivers/input/misc/drv2665.c
+++ b/drivers/input/misc/drv2665.c
@@ -15,7 +15,7 @@ 
 #include <linux/delay.h>
 #include <linux/regulator/consumer.h>
 
-/* Contol registers */
+/* Control registers */
 #define DRV2665_STATUS	0x00
 #define DRV2665_CTRL_1	0x01
 #define DRV2665_CTRL_2	0x02
diff --git a/drivers/input/misc/drv2667.c b/drivers/input/misc/drv2667.c
index ad49845374b9..b53231d41b09 100644
--- a/drivers/input/misc/drv2667.c
+++ b/drivers/input/misc/drv2667.c
@@ -16,7 +16,7 @@ 
 #include <linux/delay.h>
 #include <linux/regulator/consumer.h>
 
-/* Contol registers */
+/* Control registers */
 #define DRV2667_STATUS	0x00
 #define DRV2667_CTRL_1	0x01
 #define DRV2667_CTRL_2	0x02
diff --git a/drivers/input/misc/ideapad_slidebar.c b/drivers/input/misc/ideapad_slidebar.c
index fa4e7f67d713..7f1b3690b7e2 100644
--- a/drivers/input/misc/ideapad_slidebar.c
+++ b/drivers/input/misc/ideapad_slidebar.c
@@ -23,7 +23,7 @@ 
  *
  * The value is in byte range, however, I only figured out
  * how bits 0b10011001 work. Some other bits, probably,
- * are meaningfull too.
+ * are meaningful too.
  *
  * Possible states:
  *
diff --git a/drivers/input/misc/ims-pcu.c b/drivers/input/misc/ims-pcu.c
index 058f3470b7ae..f687e8832fd3 100644
--- a/drivers/input/misc/ims-pcu.c
+++ b/drivers/input/misc/ims-pcu.c
@@ -739,7 +739,7 @@  static int ims_pcu_switch_to_bootloader(struct ims_pcu *pcu)
 {
 	int error;
 
-	/* Execute jump to the bootoloader */
+	/* Execute jump to the bootloader */
 	error = ims_pcu_execute_command(pcu, JUMP_TO_BTLDR, NULL, 0);
 	if (error) {
 		dev_err(pcu->dev,
diff --git a/drivers/input/misc/kxtj9.c b/drivers/input/misc/kxtj9.c
index 837682cb2a7d..2f301ebb2fb8 100644
--- a/drivers/input/misc/kxtj9.c
+++ b/drivers/input/misc/kxtj9.c
@@ -25,7 +25,7 @@ 
 /* CONTROL REGISTER 1 BITS */
 #define PC1_OFF			0x7F
 #define PC1_ON			(1 << 7)
-/* Data ready funtion enable bit: set during probe if using irq mode */
+/* Data ready function enable bit: set during probe if using irq mode */
 #define DRDYE			(1 << 5)
 /* DATA CONTROL REGISTER BITS */
 #define ODR12_5F		0
diff --git a/drivers/input/misc/soc_button_array.c b/drivers/input/misc/soc_button_array.c
index 5c5d407fe965..e8f373715e50 100644
--- a/drivers/input/misc/soc_button_array.c
+++ b/drivers/input/misc/soc_button_array.c
@@ -515,7 +515,7 @@  static const struct soc_device_data soc_device_INT33D3 = {
 };
 
 /*
- * Button info for Microsoft Surface 3 (non pro), this is indentical to
+ * Button info for Microsoft Surface 3 (non pro), this is identical to
  * the PNP0C40 info except that the home button is active-high.
  *
  * The Surface 3 Pro also has a MSHW0028 ACPI device, but that uses a custom
diff --git a/drivers/input/misc/wistron_btns.c b/drivers/input/misc/wistron_btns.c
index 5a64557920fa..81f34b96c611 100644
--- a/drivers/input/misc/wistron_btns.c
+++ b/drivers/input/misc/wistron_btns.c
@@ -271,7 +271,7 @@  static struct key_entry keymap_fs_amilo_pro_v8210[] __initdata = {
 	{ KE_BLUETOOTH, 0x30 },                      /* Fn+F10 */
 	{ KE_KEY,       0x31, {KEY_MAIL} },          /* mail button */
 	{ KE_KEY,       0x36, {KEY_WWW} },           /* www button */
-	{ KE_WIFI,      0x78 },                      /* satelite dish button */
+	{ KE_WIFI,      0x78 },                      /* satellite dish button */
 	{ KE_END,       FE_WIFI_LED }
 };
 
diff --git a/drivers/input/misc/yealink.c b/drivers/input/misc/yealink.c
index 8866bf65d347..08dc53ae1b3c 100644
--- a/drivers/input/misc/yealink.c
+++ b/drivers/input/misc/yealink.c
@@ -377,7 +377,7 @@  static int yealink_do_idle_tasks(struct yealink_dev *yld)
 		if (len > sizeof(yld->ctl_data->data))
 			len = sizeof(yld->ctl_data->data);
 
-		/* Combine up to <len> consecutive LCD bytes in a singe request
+		/* Combine up to <len> consecutive LCD bytes in a single request
 		 */
 		yld->ctl_data->cmd	= CMD_LCD;
 		yld->ctl_data->offset	= cpu_to_be16(ix);
@@ -614,7 +614,7 @@  static ssize_t show_line3(struct device *dev, struct device_attribute *attr,
 	return show_line(dev, buf, LCD_LINE3_OFFSET, LCD_LINE4_OFFSET);
 }
 
-/* Writing to /sys/../lineX will set the coresponding LCD line.
+/* Writing to /sys/../lineX will set the corresponding LCD line.
  * - Excess characters are ignored.
  * - If less characters are written than allowed, the remaining digits are
  *   unchanged.