| Message ID | 20240929075856.11516-1-shenlichuan@vivo.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [v1] usb: dwc3: Correct some typos in comments | expand |
On 9/29/24 10:58, Shen Lichuan wrote: > Fixed some confusing typos that were currently identified with codespell, > the details are as follows: > > -in the code comments: > drivers/usb/dwc3/core.c:1406: feild ==> field > drivers/usb/dwc3/core.h:84: boundries ==> boundaries > drivers/usb/dwc3/ep0.c:148: issueing ==> issuing > drivers/usb/dwc3/host.c:38: temperary ==> temporary > > Signed-off-by: Shen Lichuan <shenlichuan@vivo.com> [...] > diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c > index e0533cee6870..60f7a55e1ea3 100644 > --- a/drivers/usb/dwc3/host.c > +++ b/drivers/usb/dwc3/host.c > @@ -35,7 +35,7 @@ static void dwc3_power_off_all_roothub_ports(struct dwc3 *dwc) > u32 reg; > int i; > > - /* xhci regs is not mapped yet, do it temperary here */ > + /* xhci regs is not mapped yet, do it temporary here */ s/is/are/. And maybe "temporarily"? :-) > if (dwc->xhci_resources[0].start) { > xhci_regs = ioremap(dwc->xhci_resources[0].start, DWC3_XHCI_REGS_END); > if (!xhci_regs) { MBR, Sergey
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 9eb085f359ce..3612a57f7877 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -1403,7 +1403,7 @@ static int dwc3_core_init(struct dwc3 *dwc) /* * When configured in HOST mode, after issuing U3/L2 exit controller - * fails to send proper CRC checksum in CRC5 feild. Because of this + * fails to send proper CRC checksum in CRC5 field. Because of this * behaviour Transaction Error is generated, resulting in reset and * re-enumeration of usb device attached. All the termsel, xcvrsel, * opmode becomes 0 during end of resume. Enabling bit 10 of GUCTL1 diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index c71240e8f7c7..2cb88e08e746 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -81,7 +81,7 @@ #define DWC3_GSNPSREV_MASK 0xffff #define DWC3_GSNPS_ID(p) (((p) & DWC3_GSNPSID_MASK) >> 16) -/* DWC3 registers memory space boundries */ +/* DWC3 registers memory space boundaries */ #define DWC3_XHCI_REGS_START 0x0 #define DWC3_XHCI_REGS_END 0x7fff #define DWC3_GLOBALS_REGS_START 0xc100 diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index c9533a99e47c..f3d97ad5156e 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -145,7 +145,7 @@ static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep, * Unfortunately we have uncovered a limitation wrt the Data Phase. * * Section 9.4 says we can wait for the XferNotReady(DATA) event to - * come before issueing Start Transfer command, but if we do, we will + * come before issuing Start Transfer command, but if we do, we will * miss situations where the host starts another SETUP phase instead of * the DATA phase. Such cases happen at least on TD.7.6 of the Link * Layer Compliance Suite. diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c index e0533cee6870..60f7a55e1ea3 100644 --- a/drivers/usb/dwc3/host.c +++ b/drivers/usb/dwc3/host.c @@ -35,7 +35,7 @@ static void dwc3_power_off_all_roothub_ports(struct dwc3 *dwc) u32 reg; int i; - /* xhci regs is not mapped yet, do it temperary here */ + /* xhci regs is not mapped yet, do it temporary here */ if (dwc->xhci_resources[0].start) { xhci_regs = ioremap(dwc->xhci_resources[0].start, DWC3_XHCI_REGS_END); if (!xhci_regs) {
Fixed some confusing typos that were currently identified with codespell, the details are as follows: -in the code comments: drivers/usb/dwc3/core.c:1406: feild ==> field drivers/usb/dwc3/core.h:84: boundries ==> boundaries drivers/usb/dwc3/ep0.c:148: issueing ==> issuing drivers/usb/dwc3/host.c:38: temperary ==> temporary Signed-off-by: Shen Lichuan <shenlichuan@vivo.com> --- drivers/usb/dwc3/core.c | 2 +- drivers/usb/dwc3/core.h | 2 +- drivers/usb/dwc3/ep0.c | 2 +- drivers/usb/dwc3/host.c | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-)