diff mbox series

[5/5] gpiolib: notify user-space about in-kernel line state changes

Message ID 20241004-gpio-notify-in-kernel-events-v1-5-8ac29e1df4fe@linaro.org
State New
Headers show
Series gpio: notify user-space about config changes in the kernel | expand

Commit Message

Bartosz Golaszewski Oct. 4, 2024, 2:43 p.m. UTC 
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

We currently only notify user-space about line config changes that are
made from user-space. Any kernel config changes are not signalled.

Let's improve the situation by emitting the events closer to the source.
To that end let's call the relevant notifier chain from the functions
setting direction, gpiod_set_config(), gpiod_set_consumer_name() and
gpiod_toggle_active_low(). This covers all the options that we can
inform the user-space about.

There is a problem with gpiod_direction_output/input(), namely the fact
that they can be called both from sleeping as well as atomic context. We
cannot call the blocking notifier from atomic and we cannot switch to
atomic notifier because the pinctrl functions we call higher up the stack
take a mutex. Let's instead use a workqueue and schedule a task to emit
the event from process context on the unbound system queue for minimal
latencies.

In tests, I typically get around 5 microseconds between scheduling the
work and it being executed. That could of course differ during heavy
system load but in general it should be enough to not miss direction
change events which typically are not in hot paths.

Let's also add non-notifying wrappers around the direction setters in
order to not emit superfluous reconfigure events when requesting the
lines.

We can also now make gpiod_line_state_notify() static.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
 drivers/gpio/gpiolib-cdev.c | 12 ++----
 drivers/gpio/gpiolib.c      | 99 +++++++++++++++++++++++++++++++++++++++------
 drivers/gpio/gpiolib.h      |  9 ++++-
 3 files changed, 97 insertions(+), 23 deletions(-)

Comments

Bartosz Golaszewski Oct. 5, 2024, 6:45 p.m. UTC | #1 
On Sat, Oct 5, 2024 at 11:54 AM Kent Gibson <warthog618@gmail.com> wrote:
>
> On Sat, Oct 05, 2024 at 11:42:34AM +0200, Bartosz Golaszewski wrote:
> > On Sat, Oct 5, 2024 at 9:46 AM Kent Gibson <warthog618@gmail.com> wrote:
> > >
> > > On Fri, Oct 04, 2024 at 04:43:26PM +0200, Bartosz Golaszewski wrote:
> > > > From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> > > >
> > > > There is a problem with gpiod_direction_output/input(), namely the fact
> > > > that they can be called both from sleeping as well as atomic context. We
> > > > cannot call the blocking notifier from atomic and we cannot switch to
> > > > atomic notifier because the pinctrl functions we call higher up the stack
> > > > take a mutex. Let's instead use a workqueue and schedule a task to emit
> > > > the event from process context on the unbound system queue for minimal
> > > > latencies.
> > > >
> > >
> > > So now there is a race between the state of the desc changing and the
> > > notified reading it?
> > >
> >
> > Theoretically? Well, yes... In practice I don't think this would
> > matter. But I understand the concern and won't insist if it's a
> > deal-breaker for you.
> >
>
> I don't like that correctness depends on timing, so this is a deal
> breaker for me as it stands.  I would like to see the relevant state passed
> via the notifier chain, rather than assuming it can be pulled from the desc
> when the notifier is eventually called.
>

We could potentially still use the workqueue but atomically allocate
the work_struct in any context, store the descriptor data, timestamp
etc. (except the info from pinctrl which is rarely modified and would
be retrieved just before emitting the event in process context) in it
and pass it to the workqueue which would then put the data into the
kfifo and free the work_struct. We can enforce ordering of work
execution so we wouldn't mangle them, userspace would still see the
events with correct timestamps and in the right order. Does this sound
like something viable?

Bart
Kent Gibson Oct. 5, 2024, 7:11 p.m. UTC | #2 
On Sat, Oct 05, 2024 at 08:45:17PM +0200, Bartosz Golaszewski wrote:
> On Sat, Oct 5, 2024 at 11:54 AM Kent Gibson <warthog618@gmail.com> wrote:
> >
> > On Sat, Oct 05, 2024 at 11:42:34AM +0200, Bartosz Golaszewski wrote:
> > > On Sat, Oct 5, 2024 at 9:46 AM Kent Gibson <warthog618@gmail.com> wrote:
> > > >
> > > > On Fri, Oct 04, 2024 at 04:43:26PM +0200, Bartosz Golaszewski wrote:
> > > > > From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> > > > >
> > > > > There is a problem with gpiod_direction_output/input(), namely the fact
> > > > > that they can be called both from sleeping as well as atomic context. We
> > > > > cannot call the blocking notifier from atomic and we cannot switch to
> > > > > atomic notifier because the pinctrl functions we call higher up the stack
> > > > > take a mutex. Let's instead use a workqueue and schedule a task to emit
> > > > > the event from process context on the unbound system queue for minimal
> > > > > latencies.
> > > > >
> > > >
> > > > So now there is a race between the state of the desc changing and the
> > > > notified reading it?
> > > >
> > >
> > > Theoretically? Well, yes... In practice I don't think this would
> > > matter. But I understand the concern and won't insist if it's a
> > > deal-breaker for you.
> > >
> >
> > I don't like that correctness depends on timing, so this is a deal
> > breaker for me as it stands.  I would like to see the relevant state passed
> > via the notifier chain, rather than assuming it can be pulled from the desc
> > when the notifier is eventually called.
> >
>
> We could potentially still use the workqueue but atomically allocate
> the work_struct in any context, store the descriptor data, timestamp
> etc. (except the info from pinctrl which is rarely modified and would
> be retrieved just before emitting the event in process context) in it
> and pass it to the workqueue which would then put the data into the
> kfifo and free the work_struct. We can enforce ordering of work
> execution so we wouldn't mangle them, userspace would still see the
> events with correct timestamps and in the right order. Does this sound
> like something viable?
>

That is what I had in mind.  The passed/queued state only has to be the
fields subject to change, which isn't all that much.  You have to keep any
queues finite and deal with potential overflows, though that should be
unlikely if they are reasonably sized - and as you noted earlier this is not
a hot path so even "reasonably sized" is probably going to be small.

Cheers,
Kent.
diff mbox series

Patch

diff --git a/drivers/gpio/gpiolib-cdev.c b/drivers/gpio/gpiolib-cdev.c
index f614a981253d..bb00c9c29613 100644
--- a/drivers/gpio/gpiolib-cdev.c
+++ b/drivers/gpio/gpiolib-cdev.c
@@ -196,8 +196,6 @@  static long linehandle_set_config(struct linehandle_state *lh,
 			if (ret)
 				return ret;
 		}
-
-		gpiod_line_state_notify(desc, GPIO_V2_LINE_CHANGED_CONFIG);
 	}
 	return 0;
 }
@@ -363,11 +361,11 @@  static int linehandle_create(struct gpio_device *gdev, void __user *ip)
 		if (lflags & GPIOHANDLE_REQUEST_OUTPUT) {
 			int val = !!handlereq.default_values[i];
 
-			ret = gpiod_direction_output(desc, val);
+			ret = gpiod_direction_output_nonotify(desc, val);
 			if (ret)
 				goto out_free_lh;
 		} else if (lflags & GPIOHANDLE_REQUEST_INPUT) {
-			ret = gpiod_direction_input(desc);
+			ret = gpiod_direction_input_nonotify(desc);
 			if (ret)
 				goto out_free_lh;
 		}
@@ -1566,8 +1564,6 @@  static long linereq_set_config(struct linereq *lr, void __user *ip)
 		}
 
 		WRITE_ONCE(line->edflags, edflags);
-
-		gpiod_line_state_notify(desc, GPIO_V2_LINE_CHANGED_CONFIG);
 	}
 	return 0;
 }
@@ -1824,11 +1820,11 @@  static int linereq_create(struct gpio_device *gdev, void __user *ip)
 		if (flags & GPIO_V2_LINE_FLAG_OUTPUT) {
 			int val = gpio_v2_line_config_output_value(lc, i);
 
-			ret = gpiod_direction_output(desc, val);
+			ret = gpiod_direction_output_nonotify(desc, val);
 			if (ret)
 				goto out_free_linereq;
 		} else if (flags & GPIO_V2_LINE_FLAG_INPUT) {
-			ret = gpiod_direction_input(desc);
+			ret = gpiod_direction_input_nonotify(desc);
 			if (ret)
 				goto out_free_linereq;
 
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 190ece4d6850..281502923482 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -870,6 +870,26 @@  static void gpiochip_set_data(struct gpio_chip *gc, void *data)
 	gc->gpiodev->data = data;
 }
 
+static void gpiod_line_state_notify(struct gpio_desc *desc,
+				    unsigned long action)
+{
+	blocking_notifier_call_chain(&desc->gdev->line_state_notifier,
+				     action, desc);
+}
+
+static void gpiod_config_change_func(struct work_struct *work)
+{
+	struct gpio_desc *desc = container_of(work, struct gpio_desc,
+					      line_state_work);
+
+	gpiod_line_state_notify(desc, GPIO_V2_LINE_CHANGED_CONFIG);
+}
+
+static void gpiod_line_config_change_notify(struct gpio_desc *desc)
+{
+	queue_work(system_unbound_wq, &desc->line_state_work);
+}
+
 /**
  * gpiochip_get_data() - get per-subdriver data for the chip
  * @gc: GPIO chip
@@ -1064,6 +1084,8 @@  int gpiochip_add_data_with_key(struct gpio_chip *gc, void *data,
 			assign_bit(FLAG_IS_OUT,
 				   &desc->flags, !gc->direction_input);
 		}
+
+		INIT_WORK(&desc->line_state_work, gpiod_config_change_func);
 	}
 
 	ret = of_gpiochip_add(gc);
@@ -2673,6 +2695,18 @@  int gpio_set_debounce_timeout(struct gpio_desc *desc, unsigned int debounce)
  * 0 on success, or negative errno on failure.
  */
 int gpiod_direction_input(struct gpio_desc *desc)
+{
+	int ret;
+
+	ret = gpiod_direction_input_nonotify(desc);
+	if (ret == 0)
+		gpiod_line_config_change_notify(desc);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(gpiod_direction_input);
+
+int gpiod_direction_input_nonotify(struct gpio_desc *desc)
 {
 	int ret = 0;
 
@@ -2720,7 +2754,6 @@  int gpiod_direction_input(struct gpio_desc *desc)
 
 	return ret;
 }
-EXPORT_SYMBOL_GPL(gpiod_direction_input);
 
 static int gpiod_direction_output_raw_commit(struct gpio_desc *desc, int value)
 {
@@ -2782,8 +2815,15 @@  static int gpiod_direction_output_raw_commit(struct gpio_desc *desc, int value)
  */
 int gpiod_direction_output_raw(struct gpio_desc *desc, int value)
 {
+	int ret;
+
 	VALIDATE_DESC(desc);
-	return gpiod_direction_output_raw_commit(desc, value);
+
+	ret = gpiod_direction_output_raw_commit(desc, value);
+	if (ret == 0)
+		gpiod_line_config_change_notify(desc);
+
+	return ret;
 }
 EXPORT_SYMBOL_GPL(gpiod_direction_output_raw);
 
@@ -2801,6 +2841,18 @@  EXPORT_SYMBOL_GPL(gpiod_direction_output_raw);
  * 0 on success, or negative errno on failure.
  */
 int gpiod_direction_output(struct gpio_desc *desc, int value)
+{
+	int ret;
+
+	ret = gpiod_direction_output_nonotify(desc, value);
+	if (ret == 0)
+		gpiod_line_config_change_notify(desc);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(gpiod_direction_output);
+
+int gpiod_direction_output_nonotify(struct gpio_desc *desc, int value)
 {
 	unsigned long flags;
 	int ret;
@@ -2863,7 +2915,6 @@  int gpiod_direction_output(struct gpio_desc *desc, int value)
 		set_bit(FLAG_IS_OUT, &desc->flags);
 	return ret;
 }
-EXPORT_SYMBOL_GPL(gpiod_direction_output);
 
 /**
  * gpiod_enable_hw_timestamp_ns - Enable hardware timestamp in nanoseconds.
@@ -2942,13 +2993,34 @@  EXPORT_SYMBOL_GPL(gpiod_disable_hw_timestamp_ns);
  */
 int gpiod_set_config(struct gpio_desc *desc, unsigned long config)
 {
+	int ret;
+
 	VALIDATE_DESC(desc);
 
 	CLASS(gpio_chip_guard, guard)(desc);
 	if (!guard.gc)
 		return -ENODEV;
 
-	return gpio_do_set_config(guard.gc, gpio_chip_hwgpio(desc), config);
+	ret = gpio_do_set_config(guard.gc, gpio_chip_hwgpio(desc), config);
+	if (ret == 0) {
+		/* These are the only options we notify the userspace about. */
+		switch (pinconf_to_config_param(config)) {
+		case PIN_CONFIG_BIAS_DISABLE:
+		case PIN_CONFIG_BIAS_PULL_DOWN:
+		case PIN_CONFIG_BIAS_PULL_UP:
+		case PIN_CONFIG_DRIVE_OPEN_DRAIN:
+		case PIN_CONFIG_DRIVE_OPEN_SOURCE:
+		case PIN_CONFIG_DRIVE_PUSH_PULL:
+		case PIN_CONFIG_INPUT_DEBOUNCE:
+			gpiod_line_state_notify(desc,
+						GPIO_V2_LINE_CHANGED_CONFIG);
+			break;
+		default:
+			break;
+		}
+	}
+
+	return ret;
 }
 EXPORT_SYMBOL_GPL(gpiod_set_config);
 
@@ -3015,6 +3087,7 @@  void gpiod_toggle_active_low(struct gpio_desc *desc)
 {
 	VALIDATE_DESC_VOID(desc);
 	change_bit(FLAG_ACTIVE_LOW, &desc->flags);
+	gpiod_line_state_notify(desc, GPIO_V2_LINE_CHANGED_CONFIG);
 }
 EXPORT_SYMBOL_GPL(gpiod_toggle_active_low);
 
@@ -3659,9 +3732,15 @@  EXPORT_SYMBOL_GPL(gpiod_cansleep);
  */
 int gpiod_set_consumer_name(struct gpio_desc *desc, const char *name)
 {
+	int ret;
+
 	VALIDATE_DESC(desc);
 
-	return desc_set_label(desc, name);
+	ret = desc_set_label(desc, name);
+	if (ret == 0)
+		gpiod_line_state_notify(desc, GPIO_V2_LINE_CHANGED_CONFIG);
+
+	return ret;
 }
 EXPORT_SYMBOL_GPL(gpiod_set_consumer_name);
 
@@ -4087,12 +4166,6 @@  int gpiod_set_array_value_cansleep(unsigned int array_size,
 }
 EXPORT_SYMBOL_GPL(gpiod_set_array_value_cansleep);
 
-void gpiod_line_state_notify(struct gpio_desc *desc, unsigned long action)
-{
-	blocking_notifier_call_chain(&desc->gdev->line_state_notifier,
-				     action, desc);
-}
-
 /**
  * gpiod_add_lookup_table() - register GPIO device consumers
  * @table: table of consumers to register
@@ -4537,10 +4610,10 @@  int gpiod_configure_flags(struct gpio_desc *desc, const char *con_id,
 
 	/* Process flags */
 	if (dflags & GPIOD_FLAGS_BIT_DIR_OUT)
-		ret = gpiod_direction_output(desc,
+		ret = gpiod_direction_output_nonotify(desc,
 				!!(dflags & GPIOD_FLAGS_BIT_DIR_VAL));
 	else
-		ret = gpiod_direction_input(desc);
+		ret = gpiod_direction_input_nonotify(desc);
 
 	return ret;
 }
diff --git a/drivers/gpio/gpiolib.h b/drivers/gpio/gpiolib.h
index 067197d61d57..e07e053c7860 100644
--- a/drivers/gpio/gpiolib.h
+++ b/drivers/gpio/gpiolib.h
@@ -17,6 +17,7 @@ 
 #include <linux/module.h>
 #include <linux/notifier.h>
 #include <linux/srcu.h>
+#include <linux/workqueue.h>
 
 #define GPIOCHIP_NAME	"gpiochip"
 
@@ -137,6 +138,9 @@  struct gpio_array {
 	for_each_gpio_desc(gc, desc)					\
 		if (!test_bit(flag, &desc->flags)) {} else
 
+int gpiod_direction_output_nonotify(struct gpio_desc *desc, int value);
+int gpiod_direction_input_nonotify(struct gpio_desc *desc);
+
 int gpiod_get_array_value_complex(bool raw, bool can_sleep,
 				  unsigned int array_size,
 				  struct gpio_desc **desc_array,
@@ -150,8 +154,6 @@  int gpiod_set_array_value_complex(bool raw, bool can_sleep,
 
 int gpiod_set_transitory(struct gpio_desc *desc, bool transitory);
 
-void gpiod_line_state_notify(struct gpio_desc *desc, unsigned long action);
-
 struct gpio_desc_label {
 	struct rcu_head rh;
 	char str[];
@@ -165,6 +167,8 @@  struct gpio_desc_label {
  * @label:		Name of the consumer
  * @name:		Line name
  * @hog:		Pointer to the device node that hogs this line (if any)
+ * @line_state_work:	Used to schedule line state updates to user-space from
+ *			atomic context.
  *
  * These are obtained using gpiod_get() and are preferable to the old
  * integer-based handles.
@@ -202,6 +206,7 @@  struct gpio_desc {
 #ifdef CONFIG_OF_DYNAMIC
 	struct device_node	*hog;
 #endif
+	struct work_struct	line_state_work;
 };
 
 #define gpiod_not_found(desc)		(IS_ERR(desc) && PTR_ERR(desc) == -ENOENT)