diff mbox series

[v2] scsi: ufs: core: check asymmetric connected lanes

Message ID 20241008063842.82769-1-hy50.seo@samsung.com
State New
Headers show
Series [v2] scsi: ufs: core: check asymmetric connected lanes | expand

Commit Message

SEO HOYOUNG Oct. 8, 2024, 6:38 a.m. UTC 
Performance problems may occur if there is a problem with the
asymmetric connected lane such as h/w failure.
Currently, only check connected lane for rx/tx is checked if it is not 0.
But it should also be checked if it is asymmetrically connected.

v1 -> v2: add error routine.
ufs initialization error occurs in case of asymmetic connected

Signed-off-by: SEO HOYOUNG <hy50.seo@samsung.com>
---
 drivers/ufs/core/ufshcd.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c
index 24a32e2fd75e..1381eb7d506a 100644
--- a/drivers/ufs/core/ufshcd.c
+++ b/drivers/ufs/core/ufshcd.c
@@ -4540,6 +4540,14 @@  static int ufshcd_get_max_pwr_mode(struct ufs_hba *hba)
 		return -EINVAL;
 	}
 
+	if (pwr_info->lane_rx != pwr_info->lane_tx) {
+		dev_err(hba->dev, "%s: asymmetric connected lanes. rx=%d, tx=%d\n",
+			__func__,
+				pwr_info->lane_rx,
+				pwr_info->lane_tx);
+		return -EINVAL;
+	}
+
 	/*
 	 * First, get the maximum gears of HS speed.
 	 * If a zero value, it means there is no HSGEAR capability.
@@ -8579,7 +8587,8 @@  static int ufshcd_device_params_init(struct ufs_hba *hba)
 		hba->dev_info.f_power_on_wp_en = flag;
 
 	/* Probe maximum power mode co-supported by both UFS host and device */
-	if (ufshcd_get_max_pwr_mode(hba))
+	ret = ufshcd_get_max_pwr_mode(hba);
+	if (ret)
 		dev_err(hba->dev,
 			"%s: Failed getting max supported power mode\n",
 			__func__);