new file mode 100644
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/qcom,spi-qpic-snand.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QPIC NAND controller
+
+maintainers:
+ - Md sadre Alam <quic_mdalam@quicinc.com>
+
+description:
+ The QCOM QPIC-SPI-NAND flash controller is an extended version of
+ the QCOM QPIC NAND flash controller. It can work both in serial
+ and parallel mode. It supports typical SPI-NAND page cache
+ operations in single, dual or quad IO mode with pipelined ECC
+ encoding/decoding using the QPIC ECC HW engine.
+
+allOf:
+ - $ref: /schemas/spi/spi-controller.yaml#
+
+properties:
+ compatible:
+ enum:
+ - qcom,ipq9574-snand
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 3
+
+ clock-names:
+ items:
+ - const: core
+ - const: aon
+ - const: iom
+
+ dmas:
+ items:
+ - description: tx DMA channel
+ - description: rx DMA channel
+ - description: cmd DMA channel
+
+ dma-names:
+ items:
+ - const: tx
+ - const: rx
+ - const: cmd
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,ipq9574-gcc.h>
+ spi@79b0000 {
+ compatible = "qcom,ipq9574-snand";
+ reg = <0x1ac00000 0x800>;
+
+ clocks = <&gcc GCC_QPIC_CLK>,
+ <&gcc GCC_QPIC_AHB_CLK>,
+ <&gcc GCC_QPIC_IO_MACRO_CLK>;
+ clock-names = "core", "aon", "iom";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ flash@0 {
+ compatible = "spi-nand";
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ nand-ecc-engine = <&qpic_nand>;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+ };
+ };
Document the QPIC-SPI-NAND flash controller present in the IPQ SoCs. It can work both in serial and parallel mode and supports typical SPI-NAND page cache operations. Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com> --- Change in [v11] * Dropped Reviewed-by tag * Added Soc based compitable "qcom,ipq9574-snand" Change in [v10] * No change Change in [v9] * No change Change in [v8] * No change Change in [v7] * No change Change in [v6] * No change Change in [v5] * No change Change in [v4] * Fix spelling mistake in HW description * Added commit message * Removed '|' from description * Removed minItems in clock * Added blank line * Removed co-developed by Change in [v3] * Updated commit message, removed "dt-bindings" from commit message * Updated compatible name as file name * Added hardware description * Documented clock-name * Moved dma-names property to top * Droped unused label "qpic_nand" * Fixed indentation in example dt node Change in [v2] * Added initial support for dt-bindings Change in [v1] * This patch was not included in [v1] .../bindings/spi/qcom,spi-qpic-snand.yaml | 83 +++++++++++++++++++ 1 file changed, 83 insertions(+) create mode 100644 Documentation/devicetree/bindings/spi/qcom,spi-qpic-snand.yaml