diff mbox series

[2/2] arm64: dts: qcom: Enable USB controllers for QCS8300

Message ID 20241009195636.2649952-3-quic_kriskura@quicinc.com
State Superseded
Headers show
Series Add Devicetree support for USB controllers on QCS8300 | expand

Commit Message

Krishna Kurapati Oct. 9, 2024, 7:56 p.m. UTC 
Enable primary USB controller on QCS8300 Ride platform and
set the dr mode to peripheral mode.

Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
---
 arch/arm64/boot/dts/qcom/qcs8300-ride.dts | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
index 7eed19a694c3..3e925228379c 100644
--- a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
+++ b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
@@ -265,3 +265,26 @@  &ufs_mem_phy {
 	vdda-pll-supply = <&vreg_l5a>;
 	status = "okay";
 };
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l7a>;
+	vdda18-supply = <&vreg_l7c>;
+	vdda33-supply = <&vreg_l9a>;
+
+	status = "okay";
+};
+
+&usb_qmpphy {
+	vdda-phy-supply = <&vreg_l7a>;
+	vdda-pll-supply = <&vreg_l5a>;
+
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};