diff mbox series

[v2,04/13] scsi: hisi_sas: Enable all PHYs that are not disabled by user during controller reset

Message ID 20241008021822.2617339-5-liyihang9@huawei.com
State New
Headers show
Series scsi: hisi_sas: Some fixes for hisi_sas | expand

Commit Message

Yihang Li Oct. 8, 2024, 2:18 a.m. UTC
For the controller reset operation(such as FLR or clear nexus ha in SCSI
EH), we will disable all PHYs and then enable PHY based on the
hisi_hba->phy_state obtained in hisi_sas_controller_reset_prepare(). If
the device is removed before controller reset or the PHY is not attached
to any device in directly attached scenario, the corresponding bit of
phy_state is not set. After controller reset done, the PHY is disabled.
The device cannot be identified even if user reconnect the disk.

Therefore, for PHYs that are not disabled by user, hisi_sas_phy_enable()
needs to be executed even if the corresponding bit of phy_state is not set.

Fixes: 89954f024c3a ("scsi: hisi_sas: Ensure all enabled PHYs up during controller reset")
Signed-off-by: Yihang Li <liyihang9@huawei.com>
Reviewed-by: Xiang Chen <chenxiang66@hisilicon.com>
---
 drivers/scsi/hisi_sas/hisi_sas_main.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 275d45a41b0b..f3b0042ab67c 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -1545,10 +1545,16 @@  void hisi_sas_controller_reset_done(struct hisi_hba *hisi_hba)
 	/* Init and wait for PHYs to come up and all libsas event finished. */
 	for (phy_no = 0; phy_no < hisi_hba->n_phy; phy_no++) {
 		struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
+		struct asd_sas_phy *sas_phy = &phy->sas_phy;
 
-		if (!(hisi_hba->phy_state & BIT(phy_no)))
+		if (!sas_phy->phy->enabled)
 			continue;
 
+		if (!(hisi_hba->phy_state & BIT(phy_no))) {
+			hisi_sas_phy_enable(hisi_hba, phy_no, 1);
+			continue;
+		}
+
 		async_schedule_domain(hisi_sas_async_init_wait_phyup,
 				      phy, &async);
 	}