@@ -1057,6 +1057,15 @@ static int ucsi_register_partner(struct ucsi_connector *con)
con->partner = partner;
+ if ((con->ucsi->version >= UCSI_VERSION_3_0) &&
+ (UCSI_CONSTAT_PARTNER_FLAGS(con->status.flags) &
+ UCSI_CONSTAT_PARTNER_FLAG_USB4_GEN4))
+ typec_partner_set_usb_mode(partner, USB_MODE_USB4);
+ else if ((con->ucsi->version >= UCSI_VERSION_2_0) &&
+ (UCSI_CONSTAT_PARTNER_FLAGS(con->status.flags) &
+ UCSI_CONSTAT_PARTNER_FLAG_USB4_GEN3))
+ typec_partner_set_usb_mode(partner, USB_MODE_USB4);
+
return 0;
}
@@ -346,6 +346,8 @@ struct ucsi_connector_status {
#define UCSI_CONSTAT_PARTNER_FLAGS(_f_) (((_f_) & GENMASK(12, 5)) >> 5)
#define UCSI_CONSTAT_PARTNER_FLAG_USB 1
#define UCSI_CONSTAT_PARTNER_FLAG_ALT_MODE 2
+#define UCSI_CONSTAT_PARTNER_FLAG_USB4_GEN3 4
+#define UCSI_CONSTAT_PARTNER_FLAG_USB4_GEN4 8
#define UCSI_CONSTAT_PARTNER_TYPE(_f_) (((_f_) & GENMASK(15, 13)) >> 13)
#define UCSI_CONSTAT_PARTNER_TYPE_DFP 1
#define UCSI_CONSTAT_PARTNER_TYPE_UFP 2
UCSI does not share the contents of the Enter_USB Message that was used, so the active mode still has to be always determined from the enumerated USB device. However, after UCSI v2.0 it is possible to check separately is USB4 the active mode. So with USB2 and USB3 the mode is always determined from the result of the USB enumeration, and when USB4 USB Mode is active, UCSI driver can assign the mode directly. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> --- drivers/usb/typec/ucsi/ucsi.c | 9 +++++++++ drivers/usb/typec/ucsi/ucsi.h | 2 ++ 2 files changed, 11 insertions(+)