diff mbox series

[v4,4/5] mmc-utils: Add FFU mode 4 that uses CMD6 and CMD24 single-block write to download firmware

Message ID 20241023143839.108572-5-beanhuo@iokpp.de
State New
Headers show
Series Add multiple FFU modes in mmc-utils based on eMMC specification 6.6.18 for flexible firmware updates | expand

Commit Message

Bean Huo Oct. 23, 2024, 2:38 p.m. UTC 
From: Bean Huo <beanhuo@micron.com>

FFU mode 4 initiates firmware download with CMD6 to enter FFU mode, followed by CMD24 for
single-block write, after each CMD24 single-block write, CMD6 is issued to exit FFU mode.
Which means in this mode, during FW downloading, the device will not remain FFU mode.

Signed-off-by: Bean Huo <beanhuo@micron.com>
Acked-by: Avri Altman <avri.altman@wdc.com>
---
 mmc.1      |  3 +++
 mmc.c      |  7 ++++++-
 mmc_cmds.c | 25 ++++++++++++++++++++-----
 mmc_cmds.h |  1 +
 4 files changed, 30 insertions(+), 6 deletions(-)
diff mbox series

Patch

diff --git a/mmc.1 b/mmc.1
index 220427b..273bdcc 100644
--- a/mmc.1
+++ b/mmc.1
@@ -198,6 +198,9 @@  Same as 'ffu1', but uses CMD23+CMD25 for repeated downloads and remains in FFU m
 .BI ffu3 " \fIimage\-file\-name\fR " " \fIdevice\fR " " [\fIchunk\-bytes\fR]
 Same as 'ffu1', but uses CMD25+CMD12 Open-ended Multiple-block write to download and remains in FFU mode until completion.
 .TP
+.BI ffu4 " \fIimage\-file\-name\fR " " \fIdevice\fR " " [\fIchunk\-bytes\fR]
+Same as 'ffu', but uses CMD24 Single-block write to download, exiting FFU mode after each block is written.
+.TP
 .BI erase " " \fItype\fR " " \fIstart-address\fR " " \fIend\-address\fR " " \fIdevice\fR
 Send Erase CMD38 with specific argument to the device.
 .br
diff --git a/mmc.c b/mmc.c
index e013fc6..a6474db 100644
--- a/mmc.c
+++ b/mmc.c
@@ -241,7 +241,12 @@  static struct Command commands[] = {
 	},
 	{ do_ffu3, -2,
 	 "ffu3", "<image name> <device> [chunk-bytes]\n"
-	 "Same as 'ffu', but uses CMD25+CMD12 Open-ended Multiple-block write to download and remains in FFU mode until completion.\n",
+	 "Same as 'ffu1', but uses CMD25+CMD12 Open-ended Multiple-block write to download and remains in FFU mode until completion.\n",
+	 NULL
+	},
+	{ do_ffu4, -2,
+	 "ffu4", "<image name> <device> [chunk-bytes]\n"
+	 "Same as 'ffu1', but uses CMD24 Single-block write to download, exiting FFU mode after each block written.\n",
 	 NULL
 	},
 	{ do_erase, -4,
diff --git a/mmc_cmds.c b/mmc_cmds.c
index 4bec56d..c9db4b4 100644
--- a/mmc_cmds.c
+++ b/mmc_cmds.c
@@ -2852,6 +2852,11 @@  static void set_ffu_download_cmd(struct mmc_ioc_multi_cmd *multi_cmd,
 		mmc_ioc_cmd_set_data(multi_cmd->cmds[0], buf + offset);
 		set_single_cmd(&multi_cmd->cmds[1], MMC_STOP_TRANSMISSION, 0, 0, 0);
 		multi_cmd->cmds[1].flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC;
+	} else if (ffu_mode == 4) {
+		fill_switch_cmd(&multi_cmd->cmds[0], EXT_CSD_MODE_CONFIG, EXT_CSD_FFU_MODE);
+		set_single_cmd(&multi_cmd->cmds[1], MMC_WRITE_BLOCK, 1, 1, arg);
+		mmc_ioc_cmd_set_data(multi_cmd->cmds[1], buf + offset);
+		fill_switch_cmd(&multi_cmd->cmds[2], EXT_CSD_MODE_CONFIG, EXT_CSD_NORMAL_MODE);
 	}
 }
 
@@ -2952,8 +2957,13 @@  static int do_ffu_download(int dev_fd, __u8 *ext_csd, __u8 *fw_buf, off_t fw_siz
 		return -EINVAL;
 	}
 
-	if (ffu_mode != 1) /* in FFU mode 1, mmc_ioc_multi_cmd contains 4 commands */
+	if (ffu_mode == 2 || ffu_mode == 3) {
+		/* in FFU mode 2, 3, mmc_ioc_multi_cmd contains 2 commands */
 		num_of_cmds = 2;
+	} else if (ffu_mode == 4) {
+		num_of_cmds = 3; /* in FFU mode 4, mmc_ioc_multi_cmd contains 3 commands */
+		chunk_size = 512; /* FFU mode 4 uses CMD24 single-block write */
+	}
 
 	/* allocate maximum required */
 	multi_cmd = calloc(1, sizeof(struct mmc_ioc_multi_cmd) +
@@ -2963,9 +2973,9 @@  static int do_ffu_download(int dev_fd, __u8 *ext_csd, __u8 *fw_buf, off_t fw_siz
 		return -ENOMEM;
 	}
 
-	if (ffu_mode != 1) {
+	if (ffu_mode == 2 || ffu_mode == 3) {
 		/*
-		 * If the device is not in FFU mode 1, the command to enter FFU mode will be sent
+		 * In FFU mode 2, mode 3, the command to enter FFU mode will be sent
 		 * independently, separate from the firmware bundle download command.
 		 */
 		ret = enter_ffu_mode(dev_fd);
@@ -3020,9 +3030,9 @@  do_retry:
 		off += bytes_per_loop;
 	}
 
-	if (ffu_mode != 1) {
+	if (ffu_mode == 2 || ffu_mode == 3) {
 		/*
-		 * If the device is not in FFU mode 1, the command to exit FFU mode will be sent
+		 * In FFU mode 2, FFU mode 3, the command to exit FFU mode will be sent
 		 * independently, separate from the firmware bundle download command.
 		 */
 		ret = exit_ffu_mode(dev_fd);
@@ -3208,6 +3218,11 @@  int do_ffu3(int nargs, char **argv)
 	return __do_ffu(nargs, argv, 3);
 }
 
+int do_ffu4(int nargs, char **argv)
+{
+	return __do_ffu(nargs, argv, 4);
+}
+
 int do_general_cmd_read(int nargs, char **argv)
 {
 	int dev_fd;
diff --git a/mmc_cmds.h b/mmc_cmds.h
index 413bc85..a382349 100644
--- a/mmc_cmds.h
+++ b/mmc_cmds.h
@@ -44,6 +44,7 @@  int do_cache_dis(int nargs, char **argv);
 int do_ffu1(int nargs, char **argv);
 int do_ffu2(int nargs, char **argv);
 int do_ffu3(int nargs, char **argv);
+int do_ffu4(int nargs, char **argv);
 int do_read_scr(int argc, char **argv);
 int do_read_cid(int argc, char **argv);
 int do_read_csd(int argc, char **argv);