diff mbox series

[v2,4/5] arm64: dts: exynos8895: Add serial_0/1 nodes

Message ID 20241023091734.538682-5-ivo.ivanov.ivanov1@gmail.com
State New
Headers show
Series arm64: dts: exynos8895: Add cmu, mct, serial_0/1 and spi_0/1 | expand

Commit Message

Ivaylo Ivanov Oct. 23, 2024, 9:17 a.m. UTC 
Add nodes for serial_0 (UART_DBG) and serial_1 (UART_BT), which
allows using them.

Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
---
 arch/arm64/boot/dts/exynos/exynos8895.dtsi | 26 ++++++++++++++++++++++
 1 file changed, 26 insertions(+)

Comments

Krzysztof Kozlowski Dec. 2, 2024, 8:53 a.m. UTC | #1 
On Wed, 23 Oct 2024 12:17:33 +0300, Ivaylo Ivanov wrote:
> Add nodes for serial_0 (UART_DBG) and serial_1 (UART_BT), which
> allows using them.
> 
> 

Applied, thanks!

[4/5] arm64: dts: exynos8895: Add serial_0/1 nodes
      https://git.kernel.org/krzk/linux/c/aa33006c53c9c56ecbcbbb9b5415e27000eb86d4

Best regards,
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/exynos/exynos8895.dtsi b/arch/arm64/boot/dts/exynos/exynos8895.dtsi
index e6c8a4966..ad50cd4f6 100644
--- a/arch/arm64/boot/dts/exynos/exynos8895.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos8895.dtsi
@@ -218,6 +218,19 @@  cmu_peric0: clock-controller@10400000 {
 				      "usi1", "usi2", "usi3";
 		};
 
+		serial_0: serial@10430000 {
+			compatible = "samsung,exynos8895-uart";
+			reg = <0x10430000 0x100>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_UART_DBG_PCLK>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_UART_DBG_EXT_UCLK>;
+			clock-names = "uart", "clk_uart_baud0";
+			interrupts = <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_bus>;
+			samsung,uart-fifosize = <256>;
+			status = "disabled";
+		};
+
 		pinctrl_peric0: pinctrl@104d0000 {
 			compatible = "samsung,exynos8895-pinctrl";
 			reg = <0x104d0000 0x1000>;
@@ -250,6 +263,19 @@  cmu_peric1: clock-controller@10800000 {
 				      "usi10", "usi11", "usi12", "usi13";
 		};
 
+		serial_1: serial@10830000 {
+			compatible = "samsung,exynos8895-uart";
+			reg = <0x10830000 0x100>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_UART_BT_PCLK>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_UART_BT_EXT_UCLK>;
+			clock-names = "uart", "clk_uart_baud0";
+			interrupts = <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart1_bus>;
+			samsung,uart-fifosize = <256>;
+			status = "disabled";
+		};
+
 		pinctrl_peric1: pinctrl@10980000 {
 			compatible = "samsung,exynos8895-pinctrl";
 			reg = <0x10980000 0x1000>;