@@ -397,6 +397,7 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
(pdev->device == PCI_DEVICE_ID_EJ168 ||
pdev->device == PCI_DEVICE_ID_EJ188)) {
+ xhci->quirks |= XHCI_ETRON_HOST;
xhci->quirks |= XHCI_RESET_ON_RESUME;
xhci->quirks |= XHCI_BROKEN_STREAMS;
}
@@ -3692,6 +3692,8 @@ void xhci_free_device_endpoint_resources(struct xhci_hcd *xhci,
xhci->num_active_eps);
}
+static void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev);
+
/*
* This submits a Reset Device Command, which will set the device state to 0,
* set the device address to 0, and disable all the endpoints except the default
@@ -3762,6 +3764,23 @@ static int xhci_discover_or_reset_device(struct usb_hcd *hcd,
SLOT_STATE_DISABLED)
return 0;
+ if (xhci->quirks & XHCI_ETRON_HOST) {
+ /*
+ * Obtaining a new device slot to inform the xHCI host that
+ * the USB device has been reset.
+ */
+ ret = xhci_disable_slot(xhci, udev->slot_id);
+ xhci_free_virt_device(xhci, udev->slot_id);
+ if (!ret) {
+ ret = xhci_alloc_dev(hcd, udev);
+ if (ret == 1)
+ ret = 0;
+ else
+ ret = -EINVAL;
+ }
+ return ret;
+ }
+
trace_xhci_discover_or_reset_device(slot_ctx);
xhci_dbg(xhci, "Resetting device with slot ID %u\n", slot_id);
@@ -1624,6 +1624,7 @@ struct xhci_hcd {
#define XHCI_ZHAOXIN_HOST BIT_ULL(46)
#define XHCI_WRITE_64_HI_LO BIT_ULL(47)
#define XHCI_CDNS_SCTX_QUIRK BIT_ULL(48)
+#define XHCI_ETRON_HOST BIT_ULL(49)
unsigned int num_active_eps;
unsigned int limit_active_eps;
Sometimes the hub driver does not recognize the USB device connected to the external USB2.0 hub when the system resumes from S4. After the SetPortFeature(PORT_RESET) request is completed, the hub driver calls the HCD reset_device callback, which will issue a Reset Device command and free all structures associated with endpoints that were disabled. This happens when the xHCI driver issue a Reset Device command to inform the Etron xHCI host that the USB device associated with a device slot has been reset. Seems that the Etron xHCI host can not perform this command correctly, affecting the USB device. To work around this, the xHCI driver should obtain a new device slot with reference to commit 651aaf36a7d7 ("usb: xhci: Handle USB transaction error on address command"), which is another way to inform the Etron xHCI host that the USB device has been reset. Add a new XHCI_ETRON_HOST quirk flag to invoke the workaround in xhci_discover_or_reset_device(). Fixes: 2a8f82c4ceaf ("USB: xhci: Notify the xHC when a device is reset.") Cc: <stable@vger.kernel.org> Signed-off-by: Kuangyi Chiang <ki.chiang65@gmail.com> --- drivers/usb/host/xhci-pci.c | 1 + drivers/usb/host/xhci.c | 19 +++++++++++++++++++ drivers/usb/host/xhci.h | 1 + 3 files changed, 21 insertions(+)