diff mbox series

[net-next,1/2] net: ethernet: ti: am65-cpsw: update pri_thread_map as per IEEE802.1Q-2004

Message ID 20241105-am65-cpsw-multi-rx-dscp-v1-1-38db85333c88@kernel.org
State New
Headers show
Series net: ethernet: ti: am65-cpsw: enable DSCP to priority map for RX | expand

Commit Message

Roger Quadros Nov. 5, 2024, 2:18 p.m. UTC
IEEE802.1Q-2004 superseeds IEEE802.1D-2004. Now Priority Code Point (PCP)
2 is no longer at a lower priority than PCP 0. PCP 1 (Background) is still
at a lower priority than PCP 0 (Best Effort).

Reference:
IEEE802.1Q-2004, Standard for Local and metropolitan area networks
  Table G-2 - Traffic type acronyms
  Table G-3 - Defining traffic types

Signed-off-by: Roger Quadros <rogerq@kernel.org>
---
 drivers/net/ethernet/ti/cpsw_ale.c | 25 ++++++++++++++-----------
 1 file changed, 14 insertions(+), 11 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/ti/cpsw_ale.c b/drivers/net/ethernet/ti/cpsw_ale.c
index 8d02d2b21429..7dadd95cadc5 100644
--- a/drivers/net/ethernet/ti/cpsw_ale.c
+++ b/drivers/net/ethernet/ti/cpsw_ale.c
@@ -1692,26 +1692,29 @@  static void cpsw_ale_policer_reset(struct cpsw_ale *ale)
 void cpsw_ale_classifier_setup_default(struct cpsw_ale *ale, int num_rx_ch)
 {
 	int pri, idx;
-	/* IEEE802.1D-2004, Standard for Local and metropolitan area networks
+	/* IEEE802.1Q-2004, Standard for Local and metropolitan area networks
 	 *    Table G-2 - Traffic type acronyms
 	 *    Table G-3 - Defining traffic types
-	 * User priority values 1 and 2 effectively communicate a lower
-	 * priority than 0. In the below table 0 is assigned to higher priority
-	 * thread than 1 and 2 wherever possible.
+	 * Also: https://en.wikipedia.org/wiki/IEEE_P802.1p#Priority_levels
+	 * Priority Code Point (PCP) value 1 (Background) communicates a lower
+	 * priority than 0 (Best Effort). In the below table PCP 0 is assigned
+	 * to a higher priority thread than PCP 1 wherever possible.
 	 * The below table maps which thread the user priority needs to be
 	 * sent to for a given number of threads (RX channels). Upper threads
 	 * have higher priority.
 	 * e.g. if number of threads is 8 then user priority 0 will map to
-	 * pri_thread_map[8-1][0] i.e. thread 2
+	 * pri_thread_map[8-1][0] i.e. thread 1
 	 */
-	int pri_thread_map[8][8] = {	{ 0, 0, 0, 0, 0, 0, 0, 0, },
+
+	int pri_thread_map[8][8] = {   /* BK,BE,EE,CA,VI,VO,IC,NC */
+					{ 0, 0, 0, 0, 0, 0, 0, 0, },
 					{ 0, 0, 0, 0, 1, 1, 1, 1, },
 					{ 0, 0, 0, 0, 1, 1, 2, 2, },
-					{ 1, 0, 0, 1, 2, 2, 3, 3, },
-					{ 1, 0, 0, 1, 2, 3, 4, 4, },
-					{ 1, 0, 0, 2, 3, 4, 5, 5, },
-					{ 1, 0, 0, 2, 3, 4, 5, 6, },
-					{ 2, 0, 1, 3, 4, 5, 6, 7, } };
+					{ 0, 0, 1, 1, 2, 2, 3, 3, },
+					{ 0, 0, 1, 1, 2, 2, 3, 4, },
+					{ 1, 0, 2, 2, 3, 3, 4, 5, },
+					{ 1, 0, 2, 3, 4, 4, 5, 6, },
+					{ 1, 0, 2, 3, 4, 5, 6, 7 } };
 
 	cpsw_ale_policer_reset(ale);