diff mbox series

[1/2] usb: typec: ucsi: glink: fix off-by-one in connector_status

Message ID 20241106-ucsi-glue-fixes-v1-1-d0183d78c522@linaro.org
State Superseded
Headers show
Series usb: typec: ucsi: glink: fix and improve orientation handling | expand

Commit Message

Dmitry Baryshkov Nov. 6, 2024, 3:45 p.m. UTC
UCSI connector's indices start from 1 up to 3, PMIC_GLINK_MAX_PORTS.
Correct the condition in the pmic_glink_ucsi_connector_status()
callback, fixing Type-C orientation reporting for the third USB-C
connector.

Fixes: 76716fd5bf09 ("usb: typec: ucsi: glink: move GPIO reading into connector_status callback")
Reported-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/usb/typec/ucsi/ucsi_glink.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Greg KH Nov. 7, 2024, 5:17 a.m. UTC | #1
On Wed, Nov 06, 2024 at 05:45:54PM +0200, Dmitry Baryshkov wrote:
> UCSI connector's indices start from 1 up to 3, PMIC_GLINK_MAX_PORTS.
> Correct the condition in the pmic_glink_ucsi_connector_status()
> callback, fixing Type-C orientation reporting for the third USB-C
> connector.
> 
> Fixes: 76716fd5bf09 ("usb: typec: ucsi: glink: move GPIO reading into connector_status callback")
> Reported-by: Abel Vesa <abel.vesa@linaro.org>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
>  drivers/usb/typec/ucsi/ucsi_glink.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)

Hi,

This is the friendly patch-bot of Greg Kroah-Hartman.  You have sent him
a patch that has triggered this response.  He used to manually respond
to these common problems, but in order to save his sanity (he kept
writing the same thing over and over, yet to different people), I was
created.  Hopefully you will not take offence and will fix the problem
in your patch and resubmit it so that it can be accepted into the Linux
kernel tree.

You are receiving this message because of the following common error(s)
as indicated below:

- You have marked a patch with a "Fixes:" tag for a commit that is in an
  older released kernel, yet you do not have a cc: stable line in the
  signed-off-by area at all, which means that the patch will not be
  applied to any older kernel releases.  To properly fix this, please
  follow the documented rules in the
  Documentation/process/stable-kernel-rules.rst file for how to resolve
  this.

If you wish to discuss this problem further, or you have questions about
how to resolve this issue, please feel free to respond to this email and
Greg will reply once he has dug out from the pending patches received
from other developers.

thanks,

greg k-h's patch email bot
Neil Armstrong Nov. 7, 2024, 8:36 a.m. UTC | #2
On 06/11/2024 16:45, Dmitry Baryshkov wrote:
> UCSI connector's indices start from 1 up to 3, PMIC_GLINK_MAX_PORTS.
> Correct the condition in the pmic_glink_ucsi_connector_status()
> callback, fixing Type-C orientation reporting for the third USB-C
> connector.
> 
> Fixes: 76716fd5bf09 ("usb: typec: ucsi: glink: move GPIO reading into connector_status callback")
> Reported-by: Abel Vesa <abel.vesa@linaro.org>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
>   drivers/usb/typec/ucsi/ucsi_glink.c | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/usb/typec/ucsi/ucsi_glink.c b/drivers/usb/typec/ucsi/ucsi_glink.c
> index 3e4d88ab338e50d4265df15fc960907c36675282..2e12758000a7d2d62f6e0b273cb29eafa631122c 100644
> --- a/drivers/usb/typec/ucsi/ucsi_glink.c
> +++ b/drivers/usb/typec/ucsi/ucsi_glink.c
> @@ -185,7 +185,7 @@ static void pmic_glink_ucsi_connector_status(struct ucsi_connector *con)
>   	struct pmic_glink_ucsi *ucsi = ucsi_get_drvdata(con->ucsi);
>   	int orientation;
>   
> -	if (con->num >= PMIC_GLINK_MAX_PORTS ||
> +	if (con->num > PMIC_GLINK_MAX_PORTS ||
>   	    !ucsi->port_orientation[con->num - 1])
>   		return;
>   
> 

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Dmitry Baryshkov Nov. 7, 2024, 11:04 a.m. UTC | #3
On Thu, Nov 07, 2024 at 06:17:17AM +0100, Greg Kroah-Hartman wrote:
> On Wed, Nov 06, 2024 at 05:45:54PM +0200, Dmitry Baryshkov wrote:
> > UCSI connector's indices start from 1 up to 3, PMIC_GLINK_MAX_PORTS.
> > Correct the condition in the pmic_glink_ucsi_connector_status()
> > callback, fixing Type-C orientation reporting for the third USB-C
> > connector.
> > 
> > Fixes: 76716fd5bf09 ("usb: typec: ucsi: glink: move GPIO reading into connector_status callback")
> > Reported-by: Abel Vesa <abel.vesa@linaro.org>
> > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> > ---
> >  drivers/usb/typec/ucsi/ucsi_glink.c | 2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> Hi,
> 
> This is the friendly patch-bot of Greg Kroah-Hartman.  You have sent him
> a patch that has triggered this response.  He used to manually respond
> to these common problems, but in order to save his sanity (he kept
> writing the same thing over and over, yet to different people), I was
> created.  Hopefully you will not take offence and will fix the problem
> in your patch and resubmit it so that it can be accepted into the Linux
> kernel tree.
> 
> You are receiving this message because of the following common error(s)
> as indicated below:
> 
> - You have marked a patch with a "Fixes:" tag for a commit that is in an
>   older released kernel, yet you do not have a cc: stable line in the
>   signed-off-by area at all, which means that the patch will not be
>   applied to any older kernel releases.  To properly fix this, please
>   follow the documented rules in the
>   Documentation/process/stable-kernel-rules.rst file for how to resolve
>   this.

I will resend it with CC:stable later today.

> 
> If you wish to discuss this problem further, or you have questions about
> how to resolve this issue, please feel free to respond to this email and
> Greg will reply once he has dug out from the pending patches received
> from other developers.
> 
> thanks,
> 
> greg k-h's patch email bot
Johan Hovold Nov. 8, 2024, 3:56 p.m. UTC | #4
On Wed, Nov 06, 2024 at 05:45:54PM +0200, Dmitry Baryshkov wrote:
> UCSI connector's indices start from 1 up to 3, PMIC_GLINK_MAX_PORTS.
> Correct the condition in the pmic_glink_ucsi_connector_status()
> callback, fixing Type-C orientation reporting for the third USB-C
> connector.
> 
> Fixes: 76716fd5bf09 ("usb: typec: ucsi: glink: move GPIO reading into connector_status callback")
> Reported-by: Abel Vesa <abel.vesa@linaro.org>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

Nice find!

With CC-stable tag added:

Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
diff mbox series

Patch

diff --git a/drivers/usb/typec/ucsi/ucsi_glink.c b/drivers/usb/typec/ucsi/ucsi_glink.c
index 3e4d88ab338e50d4265df15fc960907c36675282..2e12758000a7d2d62f6e0b273cb29eafa631122c 100644
--- a/drivers/usb/typec/ucsi/ucsi_glink.c
+++ b/drivers/usb/typec/ucsi/ucsi_glink.c
@@ -185,7 +185,7 @@  static void pmic_glink_ucsi_connector_status(struct ucsi_connector *con)
 	struct pmic_glink_ucsi *ucsi = ucsi_get_drvdata(con->ucsi);
 	int orientation;
 
-	if (con->num >= PMIC_GLINK_MAX_PORTS ||
+	if (con->num > PMIC_GLINK_MAX_PORTS ||
 	    !ucsi->port_orientation[con->num - 1])
 		return;