@@ -81,6 +81,7 @@
#define CORE_IO_PAD_PWR_SWITCH_EN BIT(15)
#define CORE_IO_PAD_PWR_SWITCH BIT(16)
#define CORE_HC_SELECT_IN_EN BIT(18)
+#define CORE_HC_SELECT_IN_SDR50 (4 << 19)
#define CORE_HC_SELECT_IN_HS400 (6 << 19)
#define CORE_HC_SELECT_IN_MASK (7 << 19)
@@ -1124,6 +1125,10 @@ static bool sdhci_msm_is_tuning_needed(struct sdhci_host *host)
{
struct mmc_ios *ios = &host->mmc->ios;
+ if (ios->timing == MMC_TIMING_UHS_SDR50 &&
+ host->flags & SDHCI_SDR50_NEEDS_TUNING)
+ return true;
+
/*
* Tuning is required for SDR104, HS200 and HS400 cards and
* if clock frequency is greater than 100MHz in these modes.
@@ -1192,6 +1197,8 @@ static int sdhci_msm_execute_tuning(struct mmc_host *mmc, u32 opcode)
struct mmc_ios ios = host->mmc->ios;
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
+ const struct sdhci_msm_offset *msm_offset = msm_host->offset;
+ u32 config;
if (!sdhci_msm_is_tuning_needed(host)) {
msm_host->use_cdr = false;
@@ -1208,6 +1215,15 @@ static int sdhci_msm_execute_tuning(struct mmc_host *mmc, u32 opcode)
*/
msm_host->tuning_done = 0;
+ if (ios.timing == MMC_TIMING_UHS_SDR50 &&
+ host->flags & SDHCI_SDR50_NEEDS_TUNING) {
+ config = readl_relaxed(host->ioaddr + msm_offset->core_vendor_spec);
+ config |= CORE_HC_SELECT_IN_EN;
+ config &= ~CORE_HC_SELECT_IN_MASK;
+ config |= CORE_HC_SELECT_IN_SDR50;
+ writel_relaxed(config, host->ioaddr + msm_offset->core_vendor_spec);
+ }
+
/*
* For HS400 tuning in HS200 timing requires:
* - select MCLK/2 in VENDOR_SPEC
For Qualcomm SoCs which needs level shifter for SD card, extra delay is seen on receiver data path. To compensate this delay enable tuning for SDR50 mode for targets which has level shifter. Signed-off-by: Sarthak Garg <quic_sartgarg@quicinc.com> --- drivers/mmc/host/sdhci-msm.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)