Message ID | 20241113133540.2005850-24-claudiu.beznea.uj@bp.renesas.com |
---|---|
State | New |
Headers | show |
Series | [v3,01/25] clk: renesas: r9a08g045-cpg: Add clocks, resets and power domains support for SSI | expand |
Hi Claudiu, On Wed, Nov 13, 2024 at 2:36 PM Claudiu <claudiu.beznea@tuxon.dev> wrote: > From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> > > Add the da7212 audio codec node. Along with it regulators nodes were > reworked to be able to re-use them on da7212. > > Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Thanks for your patch! > --- a/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi > +++ b/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi > @@ -63,7 +63,6 @@ vcc_sdhi0: regulator0 { > enable-active-high; > }; > > -#if SW_CONFIG2 == SW_ON > vccq_sdhi0: regulator1 { > compatible = "regulator-gpio"; > regulator-name = "SDHI0 VccQ"; > @@ -73,8 +72,8 @@ vccq_sdhi0: regulator1 { > gpios-states = <1>; > states = <3300000 1>, <1800000 0>; > }; > -#else > - reg_1p8v: regulator1 { > + > + reg_1p8v: regulator2 { > compatible = "regulator-fixed"; > regulator-name = "fixed-1.8V"; > regulator-min-microvolt = <1800000>; > @@ -82,9 +81,17 @@ reg_1p8v: regulator1 { > regulator-boot-on; > regulator-always-on; > }; > -#endif > > - vcc_sdhi2: regulator2 { > + reg_3p3v: regulator3 { > + compatible = "regulator-fixed"; > + regulator-name = "fixed-3.3V"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + vcc_sdhi2: regulator4 { So that's why it's better to prefer named over numbered regulators... > compatible = "regulator-fixed"; > regulator-name = "SDHI2 Vcc"; > regulator-min-microvolt = <3300000>; LGTM, so Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Gr{oetje,eeting}s, Geert
On Wed, Nov 13, 2024 at 2:36 PM Claudiu <claudiu.beznea@tuxon.dev> wrote: > > From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> > > Add the da7212 audio codec node. Along with it regulators nodes were > reworked to be able to re-use them on da7212. > > Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> > --- > > Changes in v3: > - none > > Changes in v2: > - none > > .../boot/dts/renesas/rzg3s-smarc-som.dtsi | 17 ++++++++++---- > arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi | 23 +++++++++++++++++++ > 2 files changed, 35 insertions(+), 5 deletions(-) > > diff --git a/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi > index 6e58d47d85b0..5ee9dac4aebb 100644 > --- a/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi > +++ b/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi > @@ -63,7 +63,6 @@ vcc_sdhi0: regulator0 { > enable-active-high; > }; > > -#if SW_CONFIG2 == SW_ON > vccq_sdhi0: regulator1 { > compatible = "regulator-gpio"; > regulator-name = "SDHI0 VccQ"; > @@ -73,8 +72,8 @@ vccq_sdhi0: regulator1 { > gpios-states = <1>; > states = <3300000 1>, <1800000 0>; > }; > -#else > - reg_1p8v: regulator1 { > + > + reg_1p8v: regulator2 { > compatible = "regulator-fixed"; > regulator-name = "fixed-1.8V"; > regulator-min-microvolt = <1800000>; > @@ -82,9 +81,17 @@ reg_1p8v: regulator1 { > regulator-boot-on; > regulator-always-on; > }; > -#endif > > - vcc_sdhi2: regulator2 { > + reg_3p3v: regulator3 { > + compatible = "regulator-fixed"; > + regulator-name = "fixed-3.3V"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + vcc_sdhi2: regulator4 { > compatible = "regulator-fixed"; > regulator-name = "SDHI2 Vcc"; > regulator-min-microvolt = <3300000>; > diff --git a/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi > index 4509151344c4..4aa99814b808 100644 > --- a/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi > +++ b/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi > @@ -68,6 +68,29 @@ &i2c0 { > status = "okay"; > > clock-frequency = <1000000>; > + > + da7212: codec@1a { > + compatible = "dlg,da7212"; > + reg = <0x1a>; > + > + #sound-dai-cells = <0>; > + #address-cells = <1>; > + #size-cells = <0>; make dtbs_check: arch/arm64/boot/dts/renesas/r9a08g045s33-smarc.dtb: codec@1a: Unevaluated properties are not allowed ('#address-cells', '#size-cells' were unexpected) from schema $id: http://devicetree.org/schemas/sound/dlg,da7213.yaml# > + > + clocks = <&versa3 1>; > + clock-names = "mclk"; > + > + dlg,micbias1-lvl = <2500>; > + dlg,micbias2-lvl = <2500>; > + dlg,dmic-data-sel = "lrise_rfall"; > + dlg,dmic-samplephase = "between_clkedge"; > + dlg,dmic-clkrate = <3000000>; > + > + VDDA-supply = <®_1p8v>; > + VDDSP-supply = <®_3p3v>; > + VDDMIC-supply = <®_3p3v>; > + VDDIO-supply = <®_1p8v>; > + }; > }; Gr{oetje,eeting}s, Geert
diff --git a/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi index 6e58d47d85b0..5ee9dac4aebb 100644 --- a/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi @@ -63,7 +63,6 @@ vcc_sdhi0: regulator0 { enable-active-high; }; -#if SW_CONFIG2 == SW_ON vccq_sdhi0: regulator1 { compatible = "regulator-gpio"; regulator-name = "SDHI0 VccQ"; @@ -73,8 +72,8 @@ vccq_sdhi0: regulator1 { gpios-states = <1>; states = <3300000 1>, <1800000 0>; }; -#else - reg_1p8v: regulator1 { + + reg_1p8v: regulator2 { compatible = "regulator-fixed"; regulator-name = "fixed-1.8V"; regulator-min-microvolt = <1800000>; @@ -82,9 +81,17 @@ reg_1p8v: regulator1 { regulator-boot-on; regulator-always-on; }; -#endif - vcc_sdhi2: regulator2 { + reg_3p3v: regulator3 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + vcc_sdhi2: regulator4 { compatible = "regulator-fixed"; regulator-name = "SDHI2 Vcc"; regulator-min-microvolt = <3300000>; diff --git a/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi index 4509151344c4..4aa99814b808 100644 --- a/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi @@ -68,6 +68,29 @@ &i2c0 { status = "okay"; clock-frequency = <1000000>; + + da7212: codec@1a { + compatible = "dlg,da7212"; + reg = <0x1a>; + + #sound-dai-cells = <0>; + #address-cells = <1>; + #size-cells = <0>; + + clocks = <&versa3 1>; + clock-names = "mclk"; + + dlg,micbias1-lvl = <2500>; + dlg,micbias2-lvl = <2500>; + dlg,dmic-data-sel = "lrise_rfall"; + dlg,dmic-samplephase = "between_clkedge"; + dlg,dmic-clkrate = <3000000>; + + VDDA-supply = <®_1p8v>; + VDDSP-supply = <®_3p3v>; + VDDMIC-supply = <®_3p3v>; + VDDIO-supply = <®_1p8v>; + }; }; &pinctrl {