| Message ID | 20241119052854.995691-3-quic_kriskura@quicinc.com |
|---|---|
| State | New |
| Headers | show |
| Series | Add DT Support for primary USB on QCS615 | expand |
diff --git a/arch/arm64/boot/dts/qcom/qcs615-ride.dts b/arch/arm64/boot/dts/qcom/qcs615-ride.dts index ee6cab3924a6..b647c87b030b 100644 --- a/arch/arm64/boot/dts/qcom/qcs615-ride.dts +++ b/arch/arm64/boot/dts/qcom/qcs615-ride.dts @@ -214,6 +214,29 @@ &uart0 { status = "okay"; }; +&usb_1_hsphy { + vdd-supply = <&vreg_l5a>; + vdda-pll-supply = <&vreg_l2a>; + vdda-phy-dpdm-supply = <&vreg_l13a>; + + status = "okay"; +}; + +&usb_qmpphy { + vdda-phy-supply = <&vreg_l5a>; + vdda-pll-supply = <&vreg_l12a>; + + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + &watchdog { clocks = <&sleep_clk>; };
Enable primary USB controller on QCS615 Ride platform. The primary USB controller is made "peripheral", as this is intended to be connected to a host for debugging use cases. For using the controller in host mode, changing the dr_mode and adding appropriate pinctrl nodes to provide vbus would be sufficient. Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> --- arch/arm64/boot/dts/qcom/qcs615-ride.dts | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+)