| Message ID | 20241119141827.1.I6129b16ec6b558efc1707861db87e55bf7022f62@changeid |
|---|---|
| State | New |
| Headers | show |
| Series | cpuidle: psci: Activate GENPD_FLAG_ACTIVE_WAKEUP with OSI | expand |
On Tue, 19 Nov 2024 at 14:21, Patrick Delaunay <patrick.delaunay@foss.st.com> wrote: > > Set GENPD_FLAG_ACTIVE_WAKEUP flag for domain psci cpuidle when OSI > is activated, then when a device is set as the wake-up source using > device_set_wakeup_path, the PSCI power domain could be retained to allow > so that the associated device can wake up the system. > > With this flag, for S2IDLE system-wide suspend, the wake-up path is > managed in each device driver and is tested in the power framework: > a PSCI domain is only turned off when GENPD_FLAG_ACTIVE_WAKEUP is enabled > and the associated device is not in the wake-up path, so PSCI CPUIdle > selects the lowest level in the PSCI topology according to the wake-up > path. > > This patch is a preliminary step to support PSCI OSI on the STM32MP25 > platform with the D1 domain (power-domain-cluster) for the A35 cortex > cluster and for the associated peripherals including EXTI1 which manages > the wake-up interrupts for domain D1. > > Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Makes perfect sense to me - so applied for next, thanks! Kind regards Uffe > --- > > drivers/cpuidle/cpuidle-psci-domain.c | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/drivers/cpuidle/cpuidle-psci-domain.c b/drivers/cpuidle/cpuidle-psci-domain.c > index 146f97068022..5fb5228f6bf1 100644 > --- a/drivers/cpuidle/cpuidle-psci-domain.c > +++ b/drivers/cpuidle/cpuidle-psci-domain.c > @@ -72,6 +72,7 @@ static int psci_pd_init(struct device_node *np, bool use_osi) > */ > if (use_osi) { > pd->power_off = psci_pd_power_off; > + pd->flags |= GENPD_FLAG_ACTIVE_WAKEUP; > if (IS_ENABLED(CONFIG_PREEMPT_RT)) > pd->flags |= GENPD_FLAG_RPM_ALWAYS_ON; > } else { > -- > 2.25.1 >
diff --git a/drivers/cpuidle/cpuidle-psci-domain.c b/drivers/cpuidle/cpuidle-psci-domain.c index 146f97068022..5fb5228f6bf1 100644 --- a/drivers/cpuidle/cpuidle-psci-domain.c +++ b/drivers/cpuidle/cpuidle-psci-domain.c @@ -72,6 +72,7 @@ static int psci_pd_init(struct device_node *np, bool use_osi) */ if (use_osi) { pd->power_off = psci_pd_power_off; + pd->flags |= GENPD_FLAG_ACTIVE_WAKEUP; if (IS_ENABLED(CONFIG_PREEMPT_RT)) pd->flags |= GENPD_FLAG_RPM_ALWAYS_ON; } else {
Set GENPD_FLAG_ACTIVE_WAKEUP flag for domain psci cpuidle when OSI is activated, then when a device is set as the wake-up source using device_set_wakeup_path, the PSCI power domain could be retained to allow so that the associated device can wake up the system. With this flag, for S2IDLE system-wide suspend, the wake-up path is managed in each device driver and is tested in the power framework: a PSCI domain is only turned off when GENPD_FLAG_ACTIVE_WAKEUP is enabled and the associated device is not in the wake-up path, so PSCI CPUIdle selects the lowest level in the PSCI topology according to the wake-up path. This patch is a preliminary step to support PSCI OSI on the STM32MP25 platform with the D1 domain (power-domain-cluster) for the A35 cortex cluster and for the associated peripherals including EXTI1 which manages the wake-up interrupts for domain D1. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> --- drivers/cpuidle/cpuidle-psci-domain.c | 1 + 1 file changed, 1 insertion(+)