| Message ID | 4052aa2f9a9ea342fa6af83fa991b55ce5d5819e.1732051814.git.christophe.jaillet@wanadoo.fr |
|---|---|
| State | New |
| Headers | show |
| Series | spi: aspeed: Fix an error handling path in aspeed_spi_[read|write]_user() | expand |
Hi Christophe, Thanks for the patch. > -----Original Message----- > From: Christophe JAILLET <christophe.jaillet@wanadoo.fr> > Sent: Wednesday, November 20, 2024 5:30 AM > Subject: [PATCH] spi: aspeed: Fix an error handling path in > aspeed_spi_[read|write]_user() > > A aspeed_spi_start_user() is not balanced by a corresponding > aspeed_spi_stop_user(). > Add the missing call. > > Fixes: e3228ed92893 ("spi: spi-mem: Convert Aspeed SMC driver to spi-mem") > Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> > --- > Compile tested only. > > > This patch is completely speculative, review with care! > > It is only based on naming where a _start() function if not followed by a > _stop() in some paths but is in other paths. > --- > drivers/spi/spi-aspeed-smc.c | 10 ++++++---- > 1 file changed, 6 insertions(+), 4 deletions(-) > > diff --git a/drivers/spi/spi-aspeed-smc.c b/drivers/spi/spi-aspeed-smc.c index > 8eb843ddb25f..e9beae95dded 100644 > --- a/drivers/spi/spi-aspeed-smc.c > +++ b/drivers/spi/spi-aspeed-smc.c > @@ -239,7 +239,7 @@ static ssize_t aspeed_spi_read_user(struct > aspeed_spi_chip *chip, > > ret = aspeed_spi_send_cmd_addr(chip, op->addr.nbytes, offset, > op->cmd.opcode); > if (ret < 0) > - return ret; > + goto stop_user; > > if (op->dummy.buswidth && op->dummy.nbytes) { > for (i = 0; i < op->dummy.nbytes / op->dummy.buswidth; i++) @@ > -249,8 +249,9 @@ static ssize_t aspeed_spi_read_user(struct aspeed_spi_chip > *chip, > aspeed_spi_set_io_mode(chip, io_mode); > > aspeed_spi_read_from_ahb(buf, chip->ahb_base, len); How about adding a blank line here? > +stop_user: > aspeed_spi_stop_user(chip); > - return 0; > + return ret; > } > > static ssize_t aspeed_spi_write_user(struct aspeed_spi_chip *chip, @@ > -261,10 +262,11 @@ static ssize_t aspeed_spi_write_user(struct > aspeed_spi_chip *chip, > aspeed_spi_start_user(chip); > ret = aspeed_spi_send_cmd_addr(chip, op->addr.nbytes, op->addr.val, > op->cmd.opcode); > if (ret < 0) > - return ret; > + goto stop_user; > aspeed_spi_write_to_ahb(chip->ahb_base, op->data.buf.out, > op->data.nbytes); A blank line here? > +stop_user: > aspeed_spi_stop_user(chip); > - return 0; > + return ret; > } > > /* support for 1-1-1, 1-1-2 or 1-1-4 */ > -- > 2.47.0 Chin-Ting
diff --git a/drivers/spi/spi-aspeed-smc.c b/drivers/spi/spi-aspeed-smc.c index 8eb843ddb25f..e9beae95dded 100644 --- a/drivers/spi/spi-aspeed-smc.c +++ b/drivers/spi/spi-aspeed-smc.c @@ -239,7 +239,7 @@ static ssize_t aspeed_spi_read_user(struct aspeed_spi_chip *chip, ret = aspeed_spi_send_cmd_addr(chip, op->addr.nbytes, offset, op->cmd.opcode); if (ret < 0) - return ret; + goto stop_user; if (op->dummy.buswidth && op->dummy.nbytes) { for (i = 0; i < op->dummy.nbytes / op->dummy.buswidth; i++) @@ -249,8 +249,9 @@ static ssize_t aspeed_spi_read_user(struct aspeed_spi_chip *chip, aspeed_spi_set_io_mode(chip, io_mode); aspeed_spi_read_from_ahb(buf, chip->ahb_base, len); +stop_user: aspeed_spi_stop_user(chip); - return 0; + return ret; } static ssize_t aspeed_spi_write_user(struct aspeed_spi_chip *chip, @@ -261,10 +262,11 @@ static ssize_t aspeed_spi_write_user(struct aspeed_spi_chip *chip, aspeed_spi_start_user(chip); ret = aspeed_spi_send_cmd_addr(chip, op->addr.nbytes, op->addr.val, op->cmd.opcode); if (ret < 0) - return ret; + goto stop_user; aspeed_spi_write_to_ahb(chip->ahb_base, op->data.buf.out, op->data.nbytes); +stop_user: aspeed_spi_stop_user(chip); - return 0; + return ret; } /* support for 1-1-1, 1-1-2 or 1-1-4 */
A aspeed_spi_start_user() is not balanced by a corresponding aspeed_spi_stop_user(). Add the missing call. Fixes: e3228ed92893 ("spi: spi-mem: Convert Aspeed SMC driver to spi-mem") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> --- Compile tested only. This patch is completely speculative, review with care! It is only based on naming where a _start() function if not followed by a _stop() in some paths but is in other paths. --- drivers/spi/spi-aspeed-smc.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)