@@ -19,7 +19,7 @@ struct hal_rx_wbm_rel_info {
bool hw_cc_done;
};
-#define HAL_INVALID_PEERID 0xffff
+#define HAL_INVALID_PEERID 0x3fff
#define VHT_SIG_SU_NSS_MASK 0x7
#define HAL_RX_MAX_MCS 12
@@ -245,6 +245,8 @@ struct hal_rx_ppdu_start {
__le32 rsvd[2];
} __packed;
+#define HAL_RX_PPDU_END_USER_STATS_INFO0_PEER_ID GENMASK(13, 0)
+#define HAL_RX_PPDU_END_USER_STATS_INFO0_DEVICE_ID GENMASK(15, 14)
#define HAL_RX_PPDU_END_USER_STATS_INFO0_MPDU_CNT_FCS_ERR GENMASK(26, 16)
#define HAL_RX_PPDU_END_USER_STATS_INFO1_MPDU_CNT_FCS_OK GENMASK(10, 0)
@@ -299,6 +301,7 @@ struct hal_rx_ppdu_end_user_stats_ext {
__le32 info4;
__le32 info5;
__le32 info6;
+ __le32 rsvd;
} __packed;
#define HAL_RX_HT_SIG_INFO_INFO0_MCS GENMASK(6, 0)
@@ -425,7 +428,7 @@ struct hal_rx_he_sig_b2_mu_info {
#define HAL_RX_HE_SIG_B2_OFDMA_INFO_INFO0_STA_ID GENMASK(10, 0)
#define HAL_RX_HE_SIG_B2_OFDMA_INFO_INFO0_STA_NSTS GENMASK(13, 11)
-#define HAL_RX_HE_SIG_B2_OFDMA_INFO_INFO0_STA_TXBF BIT(19)
+#define HAL_RX_HE_SIG_B2_OFDMA_INFO_INFO0_STA_TXBF BIT(14)
#define HAL_RX_HE_SIG_B2_OFDMA_INFO_INFO0_STA_MCS GENMASK(18, 15)
#define HAL_RX_HE_SIG_B2_OFDMA_INFO_INFO0_STA_DCM BIT(19)
#define HAL_RX_HE_SIG_B2_OFDMA_INFO_INFO0_STA_CODING BIT(20)
@@ -453,7 +456,8 @@ struct hal_rx_phyrx_rssi_legacy_info {
} __packed;
#define HAL_RX_MPDU_START_INFO0_PPDU_ID GENMASK(31, 16)
-#define HAL_RX_MPDU_START_INFO1_PEERID GENMASK(31, 16)
+#define HAL_RX_MPDU_START_INFO1_PEERID GENMASK(29, 16)
+#define HAL_RX_MPDU_START_INFO1_DEVICE_ID GENMASK(31, 30)
#define HAL_RX_MPDU_START_INFO2_MPDU_LEN GENMASK(13, 0)
struct hal_rx_mpdu_start {
__le32 rsvd0[9];
@@ -468,7 +472,7 @@ struct hal_rx_mpdu_start {
struct hal_rx_ppdu_end_duration {
__le32 rsvd0[9];
__le32 info0;
- __le32 rsvd1[4];
+ __le32 rsvd1[18];
} __packed;
struct hal_rx_rxpcu_classification_overview {
The following TLV structures and bitmask definitions were inherited from the ath11k but were not updated for the ath12k 802.11be hardware. These data structure and bitmask will be used to parse the monitor status TLV data in the Rx path. 1. hal_rx_ppdu_end_user_stats_ext structure 2. hal_rx_ppdu_end_duration structure 3. HAL_RX_HE_SIG_B2_OFDMA_INFO_INFO0_STA_TXBF bitmask 4. HAL_RX_MPDU_START_INFO1_PEERID bitmask 5. HAL_INVALID_PEERID 6. hal_rx_ppdu_end_user_stats bitmask Currently, there is no issue since the monitor status Rx path is not enabled. However, in the future, the monitor status Rx path will be enabled. Therefore, update the above TLV structures and bitmask to align with the ath12k 802.11be hardware. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> --- drivers/net/wireless/ath/ath12k/hal_rx.h | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-)