diff mbox

[02/12] pinctrl: basic Nomadik pinctrl interface

Message ID 1336470270-23518-1-git-send-email-linus.walleij@stericsson.com
State New
Headers show

Commit Message

Linus Walleij May 8, 2012, 9:44 a.m. UTC
From: Linus Walleij <linus.walleij@linaro.org>

This adds a scratch pin control interface to the Nomadik pinctrl
driver, and defines the pins and groups in the DB8500 ASIC. We
define GPIO ranges to cover the pins exposed. The DB8500 has
more pins than this but we restrict the driver to the pins that
can be controlled from the combined GPIO and pin control hardware
to begin with.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 arch/arm/mach-ux500/Kconfig              |    3 +
 arch/arm/mach-ux500/cpu-db8500.c         |    1 +
 arch/arm/mach-ux500/devices-common.h     |   12 +
 drivers/pinctrl/Kconfig                  |    8 +
 drivers/pinctrl/Makefile                 |    3 +-
 drivers/pinctrl/pinctrl-nomadik-db8500.c |  727 ++++++++++++++++++++++++++++++
 drivers/pinctrl/pinctrl-nomadik.c        |  130 +++++-
 drivers/pinctrl/pinctrl-nomadik.h        |   61 +++
 8 files changed, 943 insertions(+), 2 deletions(-)
 create mode 100644 drivers/pinctrl/pinctrl-nomadik-db8500.c
 create mode 100644 drivers/pinctrl/pinctrl-nomadik.h
diff mbox

Patch

diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index ef7099e..4adb493 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -9,6 +9,8 @@  config UX500_SOC_COMMON
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_764369
 	select CACHE_L2X0
+	select PINCTRL
+	select PINCTRL_NOMADIK
 
 config UX500_SOC_DB5500
 	bool
@@ -20,6 +22,7 @@  config UX500_SOC_DB8500
 	select REGULATOR
 	select REGULATOR_DB8500_PRCMU
 	select CPU_FREQ_TABLE if CPU_FREQ
+	select PINCTRL_DB8500
 
 menu "Ux500 target platform (boards)"
 
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 9bd8163..d992d2b 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -141,6 +141,7 @@  static void __init db8500_add_gpios(struct device *parent)
 
 	dbx500_add_gpios(parent, ARRAY_AND_SIZE(db8500_gpio_base),
 			 IRQ_DB8500_GPIO0, &pdata);
+	dbx500_add_pinctrl(parent, "pinctrl-db8500");
 }
 
 static int usb_db8500_rx_dma_cfg[] = {
diff --git a/arch/arm/mach-ux500/devices-common.h b/arch/arm/mach-ux500/devices-common.h
index 39c74ec..939f750 100644
--- a/arch/arm/mach-ux500/devices-common.h
+++ b/arch/arm/mach-ux500/devices-common.h
@@ -93,4 +93,16 @@  struct nmk_gpio_platform_data;
 void dbx500_add_gpios(struct device *parent, resource_size_t *base, int num,
 		      int irq, struct nmk_gpio_platform_data *pdata);
 
+static inline void
+dbx500_add_pinctrl(struct device *parent, const char *name)
+{
+	struct platform_device_info pdevinfo = {
+		.parent = parent,
+		.name = name,
+		.id = -1,
+	};
+
+	platform_device_register_full(&pdevinfo);
+}
+
 #endif
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index abfb964..cd17599 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -37,6 +37,14 @@  config PINCTRL_MMP2
 	select PINCTRL_PXA3xx
 	select PINCONF
 
+config PINCTRL_NOMADIK
+	bool "Nomadik pin controller driver"
+	depends on ARCH_U8500
+
+config PINCTRL_DB8500
+	bool "DB8500 pin controller driver"
+	depends on PINCTRL_NOMADIK && ARCH_U8500
+
 config PINCTRL_PXA168
 	bool "PXA168 pin controller driver"
 	depends on ARCH_MMP
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index 274e069..dd6f265 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -8,7 +8,8 @@  obj-$(CONFIG_PINCONF)		+= pinconf.o
 obj-$(CONFIG_GENERIC_PINCONF)	+= pinconf-generic.o
 obj-$(CONFIG_PINCTRL_PXA3xx)	+= pinctrl-pxa3xx.o
 obj-$(CONFIG_PINCTRL_MMP2)	+= pinctrl-mmp2.o
-obj-$(CONFIG_PLAT_NOMADIK)	+= pinctrl-nomadik.o
+obj-$(CONFIG_PINCTRL_NOMADIK)	+= pinctrl-nomadik.o
+obj-$(CONFIG_PINCTRL_DB8500)	+= pinctrl-nomadik-db8500.o
 obj-$(CONFIG_PINCTRL_PXA168)	+= pinctrl-pxa168.o
 obj-$(CONFIG_PINCTRL_PXA910)	+= pinctrl-pxa910.o
 obj-$(CONFIG_PINCTRL_SIRF)	+= pinctrl-sirf.o
diff --git a/drivers/pinctrl/pinctrl-nomadik-db8500.c b/drivers/pinctrl/pinctrl-nomadik-db8500.c
new file mode 100644
index 0000000..f3c0482
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-nomadik-db8500.c
@@ -0,0 +1,727 @@ 
+#include <linux/kernel.h>
+#include <linux/pinctrl/pinctrl.h>
+#include "pinctrl-nomadik.h"
+
+/* All the pins that can be used for GPIO and some other functions */
+#define _GPIO(offset)		(offset)
+
+#define DB8500_PIN_AJ5		_GPIO(0)
+#define DB8500_PIN_AJ3		_GPIO(1)
+#define DB8500_PIN_AH4		_GPIO(2)
+#define DB8500_PIN_AH3		_GPIO(3)
+#define DB8500_PIN_AH6		_GPIO(4)
+#define DB8500_PIN_AG6		_GPIO(5)
+#define DB8500_PIN_AF6		_GPIO(6)
+#define DB8500_PIN_AG5		_GPIO(7)
+#define DB8500_PIN_AD5		_GPIO(8)
+#define DB8500_PIN_AE4		_GPIO(9)
+#define DB8500_PIN_AF5		_GPIO(10)
+#define DB8500_PIN_AG4		_GPIO(11)
+#define DB8500_PIN_AC4		_GPIO(12)
+#define DB8500_PIN_AF3		_GPIO(13)
+#define DB8500_PIN_AE3		_GPIO(14)
+#define DB8500_PIN_AC3		_GPIO(15)
+#define DB8500_PIN_AD3		_GPIO(16)
+#define DB8500_PIN_AD4		_GPIO(17)
+#define DB8500_PIN_AC2		_GPIO(18)
+#define DB8500_PIN_AC1		_GPIO(19)
+#define DB8500_PIN_AB4		_GPIO(20)
+#define DB8500_PIN_AB3		_GPIO(21)
+#define DB8500_PIN_AA3		_GPIO(22)
+#define DB8500_PIN_AA4		_GPIO(23)
+#define DB8500_PIN_AB2		_GPIO(24)
+#define DB8500_PIN_Y4		_GPIO(25)
+#define DB8500_PIN_Y2		_GPIO(26)
+#define DB8500_PIN_AA2		_GPIO(27)
+#define DB8500_PIN_AA1		_GPIO(28)
+#define DB8500_PIN_W2		_GPIO(29)
+#define DB8500_PIN_W3		_GPIO(30)
+#define DB8500_PIN_V3		_GPIO(31)
+#define DB8500_PIN_V2		_GPIO(32)
+#define DB8500_PIN_AF2		_GPIO(33)
+#define DB8500_PIN_AE1		_GPIO(34)
+#define DB8500_PIN_AE2		_GPIO(35)
+#define DB8500_PIN_AG2		_GPIO(36)
+/* Hole */
+#define DB8500_PIN_F3		_GPIO(64)
+#define DB8500_PIN_F1		_GPIO(65)
+#define DB8500_PIN_G3		_GPIO(66)
+#define DB8500_PIN_G2		_GPIO(67)
+#define DB8500_PIN_E1		_GPIO(68)
+#define DB8500_PIN_E2		_GPIO(69)
+#define DB8500_PIN_G5		_GPIO(70)
+#define DB8500_PIN_G4		_GPIO(71)
+#define DB8500_PIN_H4		_GPIO(72)
+#define DB8500_PIN_H3		_GPIO(73)
+#define DB8500_PIN_J3		_GPIO(74)
+#define DB8500_PIN_H2		_GPIO(75)
+#define DB8500_PIN_J2		_GPIO(76)
+#define DB8500_PIN_H1		_GPIO(77)
+#define DB8500_PIN_F4		_GPIO(78)
+#define DB8500_PIN_E3		_GPIO(79)
+#define DB8500_PIN_E4		_GPIO(80)
+#define DB8500_PIN_D2		_GPIO(81)
+#define DB8500_PIN_C1		_GPIO(82)
+#define DB8500_PIN_D3		_GPIO(83)
+#define DB8500_PIN_C2		_GPIO(84)
+#define DB8500_PIN_D5		_GPIO(85)
+#define DB8500_PIN_C6		_GPIO(86)
+#define DB8500_PIN_B3		_GPIO(87)
+#define DB8500_PIN_C4		_GPIO(88)
+#define DB8500_PIN_E6		_GPIO(89)
+#define DB8500_PIN_A3		_GPIO(90)
+#define DB8500_PIN_B6		_GPIO(91)
+#define DB8500_PIN_D6		_GPIO(92)
+#define DB8500_PIN_B7		_GPIO(93)
+#define DB8500_PIN_D7		_GPIO(94)
+#define DB8500_PIN_E8		_GPIO(95)
+#define DB8500_PIN_D8		_GPIO(96)
+#define DB8500_PIN_D9		_GPIO(97)
+/* Hole */
+#define DB8500_PIN_A5		_GPIO(128)
+#define DB8500_PIN_B4		_GPIO(129)
+#define DB8500_PIN_C8		_GPIO(130)
+#define DB8500_PIN_A12		_GPIO(131)
+#define DB8500_PIN_C10		_GPIO(132)
+#define DB8500_PIN_B10		_GPIO(133)
+#define DB8500_PIN_B9		_GPIO(134)
+#define DB8500_PIN_A9		_GPIO(135)
+#define DB8500_PIN_C7		_GPIO(136)
+#define DB8500_PIN_A7		_GPIO(137)
+#define DB8500_PIN_C5		_GPIO(138)
+#define DB8500_PIN_C9		_GPIO(139)
+#define DB8500_PIN_B11		_GPIO(140)
+#define DB8500_PIN_C12		_GPIO(141)
+#define DB8500_PIN_C11		_GPIO(142)
+#define DB8500_PIN_D12		_GPIO(143)
+#define DB8500_PIN_B13		_GPIO(144)
+#define DB8500_PIN_C13		_GPIO(145)
+#define DB8500_PIN_D13		_GPIO(146)
+#define DB8500_PIN_C15		_GPIO(147)
+#define DB8500_PIN_B16		_GPIO(148)
+#define DB8500_PIN_B14		_GPIO(149)
+#define DB8500_PIN_C14		_GPIO(150)
+#define DB8500_PIN_D17		_GPIO(151)
+#define DB8500_PIN_D16		_GPIO(152)
+#define DB8500_PIN_B17		_GPIO(153)
+#define DB8500_PIN_C16		_GPIO(154)
+#define DB8500_PIN_C19		_GPIO(155)
+#define DB8500_PIN_C17		_GPIO(156)
+#define DB8500_PIN_A18		_GPIO(157)
+#define DB8500_PIN_C18		_GPIO(158)
+#define DB8500_PIN_B19		_GPIO(159)
+#define DB8500_PIN_B20		_GPIO(160)
+#define DB8500_PIN_D21		_GPIO(161)
+#define DB8500_PIN_D20		_GPIO(162)
+#define DB8500_PIN_C20		_GPIO(163)
+#define DB8500_PIN_B21		_GPIO(164)
+#define DB8500_PIN_C21		_GPIO(165)
+#define DB8500_PIN_A22		_GPIO(166)
+#define DB8500_PIN_B24		_GPIO(167)
+#define DB8500_PIN_C22		_GPIO(168)
+#define DB8500_PIN_D22		_GPIO(169)
+#define DB8500_PIN_C23		_GPIO(170)
+#define DB8500_PIN_D23		_GPIO(171)
+/* Hole */
+#define DB8500_PIN_AJ27		_GPIO(192)
+#define DB8500_PIN_AH27		_GPIO(193)
+#define DB8500_PIN_AF27		_GPIO(194)
+#define DB8500_PIN_AG28		_GPIO(195)
+#define DB8500_PIN_AG26		_GPIO(196)
+#define DB8500_PIN_AH24		_GPIO(197)
+#define DB8500_PIN_AG25		_GPIO(198)
+#define DB8500_PIN_AH23		_GPIO(199)
+#define DB8500_PIN_AH26		_GPIO(200)
+#define DB8500_PIN_AF24		_GPIO(201)
+#define DB8500_PIN_AF25		_GPIO(202)
+#define DB8500_PIN_AE23		_GPIO(203)
+#define DB8500_PIN_AF23		_GPIO(204)
+#define DB8500_PIN_AG23		_GPIO(205)
+#define DB8500_PIN_AG24		_GPIO(206)
+#define DB8500_PIN_AJ23		_GPIO(207)
+#define DB8500_PIN_AH16		_GPIO(208)
+#define DB8500_PIN_AG15		_GPIO(209)
+#define DB8500_PIN_AJ15		_GPIO(210)
+#define DB8500_PIN_AG14		_GPIO(211)
+#define DB8500_PIN_AF13		_GPIO(212)
+#define DB8500_PIN_AG13		_GPIO(213)
+#define DB8500_PIN_AH15		_GPIO(214)
+#define DB8500_PIN_AH13		_GPIO(215)
+#define DB8500_PIN_AG12		_GPIO(216)
+#define DB8500_PIN_AH12		_GPIO(217)
+#define DB8500_PIN_AH11		_GPIO(218)
+#define DB8500_PIN_AG10		_GPIO(219)
+#define DB8500_PIN_AH10		_GPIO(220)
+#define DB8500_PIN_AJ11		_GPIO(221)
+#define DB8500_PIN_AJ9		_GPIO(222)
+#define DB8500_PIN_AH9		_GPIO(223)
+#define DB8500_PIN_AG9		_GPIO(224)
+#define DB8500_PIN_AG8		_GPIO(225)
+#define DB8500_PIN_AF8		_GPIO(226)
+#define DB8500_PIN_AH7		_GPIO(227)
+#define DB8500_PIN_AJ6		_GPIO(228)
+#define DB8500_PIN_AG7		_GPIO(229)
+#define DB8500_PIN_AF7		_GPIO(230)
+/* Hole */
+#define DB8500_PIN_AF28		_GPIO(256)
+#define DB8500_PIN_AE29		_GPIO(257)
+#define DB8500_PIN_AD29		_GPIO(258)
+#define DB8500_PIN_AC29		_GPIO(259)
+#define DB8500_PIN_AD28		_GPIO(260)
+#define DB8500_PIN_AD26		_GPIO(261)
+#define DB8500_PIN_AE26		_GPIO(262)
+#define DB8500_PIN_AG29		_GPIO(263)
+#define DB8500_PIN_AE27		_GPIO(264)
+#define DB8500_PIN_AD27		_GPIO(265)
+#define DB8500_PIN_AC28		_GPIO(266)
+#define DB8500_PIN_AC27		_GPIO(267)
+
+/*
+ * The names of the pins are denoted by GPIO number and ball name, even
+ * though they can be used for other things than GPIO, this is the first
+ * column in the table of the data sheet and often used on schematics and
+ * such.
+ */
+static const struct pinctrl_pin_desc nmk_db8500_pins[] = {
+	PINCTRL_PIN(DB8500_PIN_AJ5, "GPIO0_AJ5"),
+	PINCTRL_PIN(DB8500_PIN_AJ3, "GPIO1_AJ3"),
+	PINCTRL_PIN(DB8500_PIN_AH4, "GPIO2_AH4"),
+	PINCTRL_PIN(DB8500_PIN_AH3, "GPIO3_AH3"),
+	PINCTRL_PIN(DB8500_PIN_AH6, "GPIO4_AH6"),
+	PINCTRL_PIN(DB8500_PIN_AG6, "GPIO5_AG6"),
+	PINCTRL_PIN(DB8500_PIN_AF6, "GPIO6_AF6"),
+	PINCTRL_PIN(DB8500_PIN_AG5, "GPIO7_AG5"),
+	PINCTRL_PIN(DB8500_PIN_AD5, "GPIO8_AD5"),
+	PINCTRL_PIN(DB8500_PIN_AE4, "GPIO9_AE4"),
+	PINCTRL_PIN(DB8500_PIN_AF5, "GPIO10_AF5"),
+	PINCTRL_PIN(DB8500_PIN_AG4, "GPIO11_AG4"),
+	PINCTRL_PIN(DB8500_PIN_AC4, "GPIO12_AC4"),
+	PINCTRL_PIN(DB8500_PIN_AF3, "GPIO13_AF3"),
+	PINCTRL_PIN(DB8500_PIN_AE3, "GPIO14_AE3"),
+	PINCTRL_PIN(DB8500_PIN_AC3, "GPIO15_AC3"),
+	PINCTRL_PIN(DB8500_PIN_AD3, "GPIO16_AD3"),
+	PINCTRL_PIN(DB8500_PIN_AD4, "GPIO17_AD4"),
+	PINCTRL_PIN(DB8500_PIN_AC2, "GPIO18_AC2"),
+	PINCTRL_PIN(DB8500_PIN_AC1, "GPIO19_AC1"),
+	PINCTRL_PIN(DB8500_PIN_AB4, "GPIO20_AB4"),
+	PINCTRL_PIN(DB8500_PIN_AB3, "GPIO21_AB3"),
+	PINCTRL_PIN(DB8500_PIN_AA3, "GPIO22_AA3"),
+	PINCTRL_PIN(DB8500_PIN_AA4, "GPIO23_AA4"),
+	PINCTRL_PIN(DB8500_PIN_AB2, "GPIO24_AB2"),
+	PINCTRL_PIN(DB8500_PIN_Y4, "GPIO25_Y4"),
+	PINCTRL_PIN(DB8500_PIN_Y2, "GPIO26_Y2"),
+	PINCTRL_PIN(DB8500_PIN_AA2, "GPIO27_AA2"),
+	PINCTRL_PIN(DB8500_PIN_AA1, "GPIO28_AA1"),
+	PINCTRL_PIN(DB8500_PIN_W2, "GPIO29_W2"),
+	PINCTRL_PIN(DB8500_PIN_W3, "GPIO30_W3"),
+	PINCTRL_PIN(DB8500_PIN_V3, "GPIO31_V3"),
+	PINCTRL_PIN(DB8500_PIN_V2, "GPIO32_V2"),
+	PINCTRL_PIN(DB8500_PIN_AF2, "GPIO33_AF2"),
+	PINCTRL_PIN(DB8500_PIN_AE1, "GPIO34_AE1"),
+	PINCTRL_PIN(DB8500_PIN_AE2, "GPIO35_AE2"),
+	PINCTRL_PIN(DB8500_PIN_AG2, "GPIO36_AG2"),
+	/* Hole */
+	PINCTRL_PIN(DB8500_PIN_F3, "GPIO64_F3"),
+	PINCTRL_PIN(DB8500_PIN_F1, "GPIO65_F1"),
+	PINCTRL_PIN(DB8500_PIN_G3, "GPIO66_G3"),
+	PINCTRL_PIN(DB8500_PIN_G2, "GPIO67_G2"),
+	PINCTRL_PIN(DB8500_PIN_E1, "GPIO68_E1"),
+	PINCTRL_PIN(DB8500_PIN_E2, "GPIO69_E2"),
+	PINCTRL_PIN(DB8500_PIN_G5, "GPIO70_G5"),
+	PINCTRL_PIN(DB8500_PIN_G4, "GPIO71_G4"),
+	PINCTRL_PIN(DB8500_PIN_H4, "GPIO72_H4"),
+	PINCTRL_PIN(DB8500_PIN_H3, "GPIO73_H3"),
+	PINCTRL_PIN(DB8500_PIN_J3, "GPIO74_J3"),
+	PINCTRL_PIN(DB8500_PIN_H2, "GPIO75_H2"),
+	PINCTRL_PIN(DB8500_PIN_J2, "GPIO76_J2"),
+	PINCTRL_PIN(DB8500_PIN_H1, "GPIO77_H1"),
+	PINCTRL_PIN(DB8500_PIN_F4, "GPIO78_F4"),
+	PINCTRL_PIN(DB8500_PIN_E3, "GPIO79_E3"),
+	PINCTRL_PIN(DB8500_PIN_E4, "GPIO80_E4"),
+	PINCTRL_PIN(DB8500_PIN_D2, "GPIO81_D2"),
+	PINCTRL_PIN(DB8500_PIN_C1, "GPIO82_C1"),
+	PINCTRL_PIN(DB8500_PIN_D3, "GPIO83_D3"),
+	PINCTRL_PIN(DB8500_PIN_C2, "GPIO84_C2"),
+	PINCTRL_PIN(DB8500_PIN_D5, "GPIO85_D5"),
+	PINCTRL_PIN(DB8500_PIN_C6, "GPIO86_C6"),
+	PINCTRL_PIN(DB8500_PIN_B3, "GPIO87_B3"),
+	PINCTRL_PIN(DB8500_PIN_C4, "GPIO88_C4"),
+	PINCTRL_PIN(DB8500_PIN_E6, "GPIO89_E6"),
+	PINCTRL_PIN(DB8500_PIN_A3, "GPIO90_A3"),
+	PINCTRL_PIN(DB8500_PIN_B6, "GPIO91_B6"),
+	PINCTRL_PIN(DB8500_PIN_D6, "GPIO92_D6"),
+	PINCTRL_PIN(DB8500_PIN_B7, "GPIO93_B7"),
+	PINCTRL_PIN(DB8500_PIN_D7, "GPIO94_D7"),
+	PINCTRL_PIN(DB8500_PIN_E8, "GPIO95_E8"),
+	PINCTRL_PIN(DB8500_PIN_D8, "GPIO96_D8"),
+	PINCTRL_PIN(DB8500_PIN_D9, "GPIO97_D9"),
+	/* Hole */
+	PINCTRL_PIN(DB8500_PIN_A5, "GPIO128_A5"),
+	PINCTRL_PIN(DB8500_PIN_B4, "GPIO129_B4"),
+	PINCTRL_PIN(DB8500_PIN_C8, "GPIO130_C8"),
+	PINCTRL_PIN(DB8500_PIN_A12, "GPIO131_A12"),
+	PINCTRL_PIN(DB8500_PIN_C10, "GPIO132_C10"),
+	PINCTRL_PIN(DB8500_PIN_B10, "GPIO133_B10"),
+	PINCTRL_PIN(DB8500_PIN_B9, "GPIO134_B9"),
+	PINCTRL_PIN(DB8500_PIN_A9, "GPIO135_A9"),
+	PINCTRL_PIN(DB8500_PIN_C7, "GPIO136_C7"),
+	PINCTRL_PIN(DB8500_PIN_A7, "GPIO137_A7"),
+	PINCTRL_PIN(DB8500_PIN_C5, "GPIO138_C5"),
+	PINCTRL_PIN(DB8500_PIN_C9, "GPIO139_C9"),
+	PINCTRL_PIN(DB8500_PIN_B11, "GPIO140_B11"),
+	PINCTRL_PIN(DB8500_PIN_C12, "GPIO141_12"),
+	PINCTRL_PIN(DB8500_PIN_C11, "GPIO142_C11"),
+	PINCTRL_PIN(DB8500_PIN_D12, "GPIO143_D12"),
+	PINCTRL_PIN(DB8500_PIN_B13, "GPIO144_B13"),
+	PINCTRL_PIN(DB8500_PIN_C13, "GPIO145_C13"),
+	PINCTRL_PIN(DB8500_PIN_D13, "GPIO146_D13"),
+	PINCTRL_PIN(DB8500_PIN_C15, "GPIO147_C15"),
+	PINCTRL_PIN(DB8500_PIN_B16, "GPIO148_B16"),
+	PINCTRL_PIN(DB8500_PIN_B14, "GPIO149_B14"),
+	PINCTRL_PIN(DB8500_PIN_C14, "GPIO150_C14"),
+	PINCTRL_PIN(DB8500_PIN_D17, "GPIO151_D17"),
+	PINCTRL_PIN(DB8500_PIN_D16, "GPIO152_D16"),
+	PINCTRL_PIN(DB8500_PIN_B17, "GPIO153_B17"),
+	PINCTRL_PIN(DB8500_PIN_C16, "GPIO154_C16"),
+	PINCTRL_PIN(DB8500_PIN_C19, "GPIO155_C19"),
+	PINCTRL_PIN(DB8500_PIN_C17, "GPIO156_C17"),
+	PINCTRL_PIN(DB8500_PIN_A18, "GPIO157_A18"),
+	PINCTRL_PIN(DB8500_PIN_C18, "GPIO158_C18"),
+	PINCTRL_PIN(DB8500_PIN_B19, "GPIO159_B19"),
+	PINCTRL_PIN(DB8500_PIN_B20, "GPIO160_B20"),
+	PINCTRL_PIN(DB8500_PIN_D21, "GPIO161_D21"),
+	PINCTRL_PIN(DB8500_PIN_D20, "GPIO162_D20"),
+	PINCTRL_PIN(DB8500_PIN_C20, "GPIO163_C20"),
+	PINCTRL_PIN(DB8500_PIN_B21, "GPIO164_B21"),
+	PINCTRL_PIN(DB8500_PIN_C21, "GPIO165_C21"),
+	PINCTRL_PIN(DB8500_PIN_A22, "GPIO166_A22"),
+	PINCTRL_PIN(DB8500_PIN_B24, "GPIO167_B24"),
+	PINCTRL_PIN(DB8500_PIN_C22, "GPIO168_C22"),
+	PINCTRL_PIN(DB8500_PIN_D22, "GPIO169_D22"),
+	PINCTRL_PIN(DB8500_PIN_C23, "GPIO170_C23"),
+	PINCTRL_PIN(DB8500_PIN_D23, "GPIO171_D23"),
+	/* Hole */
+	PINCTRL_PIN(DB8500_PIN_AJ27, "GPIO192_AJ27"),
+	PINCTRL_PIN(DB8500_PIN_AH27, "GPIO193_AH27"),
+	PINCTRL_PIN(DB8500_PIN_AF27, "GPIO194_AF27"),
+	PINCTRL_PIN(DB8500_PIN_AG28, "GPIO195_AG28"),
+	PINCTRL_PIN(DB8500_PIN_AG26, "GPIO196_AG26"),
+	PINCTRL_PIN(DB8500_PIN_AH24, "GPIO197_AH24"),
+	PINCTRL_PIN(DB8500_PIN_AG25, "GPIO198_AG25"),
+	PINCTRL_PIN(DB8500_PIN_AH23, "GPIO199_AH23"),
+	PINCTRL_PIN(DB8500_PIN_AH26, "GPIO200_AH26"),
+	PINCTRL_PIN(DB8500_PIN_AF24, "GPIO201_AF24"),
+	PINCTRL_PIN(DB8500_PIN_AF25, "GPIO202_AF25"),
+	PINCTRL_PIN(DB8500_PIN_AE23, "GPIO203_AE23"),
+	PINCTRL_PIN(DB8500_PIN_AF23, "GPIO204_AF23"),
+	PINCTRL_PIN(DB8500_PIN_AG23, "GPIO205_AG23"),
+	PINCTRL_PIN(DB8500_PIN_AG24, "GPIO206_AG24"),
+	PINCTRL_PIN(DB8500_PIN_AJ23, "GPIO207_AJ23"),
+	PINCTRL_PIN(DB8500_PIN_AH16, "GPIO208_AH16"),
+	PINCTRL_PIN(DB8500_PIN_AG15, "GPIO209_AG15"),
+	PINCTRL_PIN(DB8500_PIN_AJ15, "GPIO210_AJ15"),
+	PINCTRL_PIN(DB8500_PIN_AG14, "GPIO211_AG14"),
+	PINCTRL_PIN(DB8500_PIN_AF13, "GPIO212_AF13"),
+	PINCTRL_PIN(DB8500_PIN_AG13, "GPIO213_AG13"),
+	PINCTRL_PIN(DB8500_PIN_AH15, "GPIO214_AH15"),
+	PINCTRL_PIN(DB8500_PIN_AH13, "GPIO215_AH13"),
+	PINCTRL_PIN(DB8500_PIN_AG12, "GPIO216_AG12"),
+	PINCTRL_PIN(DB8500_PIN_AH12, "GPIO217_AH12"),
+	PINCTRL_PIN(DB8500_PIN_AH11, "GPIO218_AH11"),
+	PINCTRL_PIN(DB8500_PIN_AG10, "GPIO219_AG10"),
+	PINCTRL_PIN(DB8500_PIN_AH10, "GPIO220_AH10"),
+	PINCTRL_PIN(DB8500_PIN_AJ11, "GPIO221_AJ11"),
+	PINCTRL_PIN(DB8500_PIN_AJ9, "GPIO222_AJ9"),
+	PINCTRL_PIN(DB8500_PIN_AH9, "GPIO223_AH9"),
+	PINCTRL_PIN(DB8500_PIN_AG9, "GPIO224_AG9"),
+	PINCTRL_PIN(DB8500_PIN_AG8, "GPIO225_AG8"),
+	PINCTRL_PIN(DB8500_PIN_AF8, "GPIO226_AF8"),
+	PINCTRL_PIN(DB8500_PIN_AH7, "GPIO227_AH7"),
+	PINCTRL_PIN(DB8500_PIN_AJ6, "GPIO228_AJ6"),
+	PINCTRL_PIN(DB8500_PIN_AG7, "GPIO229_AG7"),
+	PINCTRL_PIN(DB8500_PIN_AF7, "GPIO230_AF7"),
+	/* Hole */
+	PINCTRL_PIN(DB8500_PIN_AF28, "GPIO256_AF28"),
+	PINCTRL_PIN(DB8500_PIN_AE29, "GPIO257_AE29"),
+	PINCTRL_PIN(DB8500_PIN_AD29, "GPIO258_AD29"),
+	PINCTRL_PIN(DB8500_PIN_AC29, "GPIO259_AC29"),
+	PINCTRL_PIN(DB8500_PIN_AD28, "GPIO260_AD28"),
+	PINCTRL_PIN(DB8500_PIN_AD26, "GPIO261_AD26"),
+	PINCTRL_PIN(DB8500_PIN_AE26, "GPIO262_AE26"),
+	PINCTRL_PIN(DB8500_PIN_AG29, "GPIO263_AG29"),
+	PINCTRL_PIN(DB8500_PIN_AE27, "GPIO264_AE27"),
+	PINCTRL_PIN(DB8500_PIN_AD27, "GPIO265_AD27"),
+	PINCTRL_PIN(DB8500_PIN_AC28, "GPIO266_AC28"),
+	PINCTRL_PIN(DB8500_PIN_AC27, "GPIO267_AC27"),
+};
+
+#define DB8500_GPIO_RANGE(a, b, c) { .name = "DB8500", .id = a, .base = b, \
+			.pin_base = b, .npins = c }
+
+/*
+ * This matches the 32-pin gpio chips registered by the GPIO portion. This
+ * cannot be const since we assign the struct gpio_chip * pointer at runtime.
+ */
+static struct pinctrl_gpio_range nmk_db8500_ranges[] = {
+	DB8500_GPIO_RANGE(0, 0, 32),
+	DB8500_GPIO_RANGE(1, 32, 5),
+	DB8500_GPIO_RANGE(2, 64, 32),
+	DB8500_GPIO_RANGE(3, 96, 2),
+	DB8500_GPIO_RANGE(4, 128, 32),
+	DB8500_GPIO_RANGE(5, 160, 12),
+	DB8500_GPIO_RANGE(6, 192, 32),
+	DB8500_GPIO_RANGE(7, 224, 7),
+	DB8500_GPIO_RANGE(8, 256, 12),
+};
+
+/*
+ * Read the pin group names like this:
+ * u0_a_1    = first groups of pins for uart0 on alt function a
+ * i2c2_b_2  = second group of pins for i2c2 on alt function b
+ *
+ * The groups are arranged as sets per altfunction column, so we can
+ * mux in one group at a time by selecting the same altfunction for them
+ * all. When functions require pins on different altfunctions, you need
+ * to combine several groups.
+ */
+
+/* Altfunction A column */
+static const unsigned u0_a_1_pins[] = { DB8500_PIN_AJ5, DB8500_PIN_AJ3,
+					DB8500_PIN_AH4, DB8500_PIN_AH3 };
+static const unsigned u1rxtx_a_1_pins[] = { DB8500_PIN_AH6, DB8500_PIN_AG6 };
+static const unsigned u1ctsrts_a_1_pins[] = { DB8500_PIN_AF6, DB8500_PIN_AG5 };
+/* Image processor I2C line, this is driven by image processor firmware */
+static const unsigned ipi2c_a_1_pins[] = { DB8500_PIN_AD5, DB8500_PIN_AE4 };
+static const unsigned ipi2c_a_2_pins[] = { DB8500_PIN_AF5, DB8500_PIN_AG4 };
+/* MSP0 can only be on these pins, but TXD and RXD can be flipped */
+static const unsigned msp0txrx_a_1_pins[] = { DB8500_PIN_AC4, DB8500_PIN_AC3 };
+static const unsigned msp0tfstck_a_1_pins[] = { DB8500_PIN_AF3, DB8500_PIN_AE3 };
+static const unsigned msp0rfsrck_a_1_pins[] = { DB8500_PIN_AD3, DB8500_PIN_AD4 };
+/* Basic pins of the MMC/SD card 0 interface */
+static const unsigned mc0_a_1_pins[] = { DB8500_PIN_AC2, DB8500_PIN_AC1,
+	DB8500_PIN_AB4, DB8500_PIN_AA3, DB8500_PIN_AA4, DB8500_PIN_AB2,
+	DB8500_PIN_Y4, DB8500_PIN_Y2, DB8500_PIN_AA2, DB8500_PIN_AA1 };
+/* Often only 4 bits are used, then these are not needed (only used for MMC) */
+static const unsigned mc0_dat47_a_1_pins[] = { DB8500_PIN_W2, DB8500_PIN_W3,
+	DB8500_PIN_V3, DB8500_PIN_V2};
+static const unsigned mc0dat31dir_a_1_pins[] = { DB8500_PIN_AB3 };
+/* MSP1 can only be on these pins, but TXD and RXD can be flipped */
+static const unsigned msp1txrx_a_1_pins[] = { DB8500_PIN_AF2, DB8500_PIN_AG2 };
+static const unsigned msp1_a_1_pins[] = { DB8500_PIN_AE1, DB8500_PIN_AE2 };
+/* LCD interface */
+static const unsigned lcdb_a_1_pins[] = { DB8500_PIN_F3, DB8500_PIN_F1,
+					  DB8500_PIN_G3, DB8500_PIN_G2 };
+static const unsigned lcdvsi0_a_1_pins[] = { DB8500_PIN_E1 };
+static const unsigned lcdvsi1_a_1_pins[] = { DB8500_PIN_E2 };
+static const unsigned lcd_d0_d7_a_1_pins[] = {
+	DB8500_PIN_G5, DB8500_PIN_G4, DB8500_PIN_H4, DB8500_PIN_H3,
+	DB8500_PIN_J3, DB8500_PIN_H2, DB8500_PIN_J2, DB8500_PIN_H1 };
+/* D8 thru D11 often used as TVOUT lines */
+static const unsigned lcd_d8_d11_a_1_pins[] = { DB8500_PIN_F4,
+	DB8500_PIN_E3, DB8500_PIN_E4, DB8500_PIN_D2 };
+static const unsigned lcd_d12_d23_a_1_pins[] = {
+	DB8500_PIN_C1, DB8500_PIN_D3, DB8500_PIN_C2, DB8500_PIN_D5,
+	DB8500_PIN_C6, DB8500_PIN_B3, DB8500_PIN_C4, DB8500_PIN_E6,
+	DB8500_PIN_A3, DB8500_PIN_B6, DB8500_PIN_D6, DB8500_PIN_B7 };
+static const unsigned kp_a_1_pins[] = { DB8500_PIN_D7, DB8500_PIN_E8,
+	DB8500_PIN_D8, DB8500_PIN_D9 };
+static const unsigned kpskaskb_a_1_pins[] = { DB8500_PIN_D17, DB8500_PIN_D16 };
+static const unsigned kp_a_2_pins[] = {
+	DB8500_PIN_B17, DB8500_PIN_C16, DB8500_PIN_C19, DB8500_PIN_C17,
+	DB8500_PIN_A18, DB8500_PIN_C18, DB8500_PIN_B19, DB8500_PIN_B20,
+	DB8500_PIN_D21, DB8500_PIN_D20, DB8500_PIN_C20, DB8500_PIN_B21,
+	DB8500_PIN_C21, DB8500_PIN_A22, DB8500_PIN_B24, DB8500_PIN_C22 };
+/* MC2 has 8 data lines and no direction control, so only for (e)MMC */
+static const unsigned mc2_a_1_pins[] = { DB8500_PIN_A5, DB8500_PIN_B4,
+	DB8500_PIN_C8, DB8500_PIN_A12, DB8500_PIN_C10, DB8500_PIN_B10,
+	DB8500_PIN_B9, DB8500_PIN_A9, DB8500_PIN_C7, DB8500_PIN_A7,
+	DB8500_PIN_C5 };
+static const unsigned ssp1_a_1_pins[] = { DB8500_PIN_C9, DB8500_PIN_B11,
+					  DB8500_PIN_C12, DB8500_PIN_C11 };
+static const unsigned ssp0_a_1_pins[] = { DB8500_PIN_D12, DB8500_PIN_B13,
+					  DB8500_PIN_C13, DB8500_PIN_D13 };
+static const unsigned i2c0_a_1_pins[] = { DB8500_PIN_C15, DB8500_PIN_B16 };
+/*
+ * Image processor GPIO pins are named "ipgpio" and have their own
+ * numberspace
+ */
+static const unsigned ipgpio0_a_1_pins[] = { DB8500_PIN_B14 };
+static const unsigned ipgpio1_a_1_pins[] = { DB8500_PIN_C14 };
+/* Three modem pins named RF_PURn, MODEM_STATE and MODEM_PWREN */
+static const unsigned modem_a_1_pins[] = { DB8500_PIN_D22, DB8500_PIN_C23,
+					   DB8500_PIN_D23 };
+/*
+ * This MSP cannot switch RX and TX, SCK in a separate group since this
+ * seems to be optional.
+ */
+static const unsigned msp2sck_a_1_pins[] = { DB8500_PIN_AJ27 };
+static const unsigned msp2_a_1_pins[] = { DB8500_PIN_AH27, DB8500_PIN_AF27,
+					  DB8500_PIN_AG28, DB8500_PIN_AG26 };
+static const unsigned mc4_a_1_pins[] = { DB8500_PIN_AH24, DB8500_PIN_AG25,
+	DB8500_PIN_AH23, DB8500_PIN_AH26, DB8500_PIN_AF24, DB8500_PIN_AF25,
+	DB8500_PIN_AE23, DB8500_PIN_AF23, DB8500_PIN_AG23, DB8500_PIN_AG24,
+	DB8500_PIN_AJ23 };
+/* MC1 has only 4 data pins, designed for SD or SDIO exclusively */
+static const unsigned mc1_a_1_pins[] = { DB8500_PIN_AH16, DB8500_PIN_AG15,
+	DB8500_PIN_AJ15, DB8500_PIN_AG14, DB8500_PIN_AF13, DB8500_PIN_AG13,
+	DB8500_PIN_AH15 };
+static const unsigned mc1dir_a_1_pins[] = { DB8500_PIN_AH13, DB8500_PIN_AG12,
+	DB8500_PIN_AH12, DB8500_PIN_AH11 };
+static const unsigned hsir_a_1_pins[] = { DB8500_PIN_AG10, DB8500_PIN_AH10 };
+static const unsigned hsit_a_1_pins[] = { DB8500_PIN_AJ11, DB8500_PIN_AJ9,
+	DB8500_PIN_AH9, DB8500_PIN_AG9, DB8500_PIN_AG8, DB8500_PIN_AF8 };
+static const unsigned clkout_a_1_pins[] = { DB8500_PIN_AH7, DB8500_PIN_AJ6 };
+static const unsigned clkout_a_2_pins[] = { DB8500_PIN_AG7, DB8500_PIN_AF7 };
+static const unsigned usb_a_1_pins[] = { DB8500_PIN_AF28, DB8500_PIN_AE29,
+	DB8500_PIN_AD29, DB8500_PIN_AC29, DB8500_PIN_AD28, DB8500_PIN_AD26,
+	DB8500_PIN_AE26, DB8500_PIN_AG29, DB8500_PIN_AE27, DB8500_PIN_AD27,
+	DB8500_PIN_AC28, DB8500_PIN_AC27 };
+
+/* Altfunction B column */
+static const unsigned trig_b_1_pins[] = { DB8500_PIN_AJ5, DB8500_PIN_AJ3 };
+static const unsigned i2c4_b_1_pins[] = { DB8500_PIN_AH6, DB8500_PIN_AG6 };
+static const unsigned i2c1_b_1_pins[] = { DB8500_PIN_AF6, DB8500_PIN_AG5 };
+static const unsigned i2c2_b_1_pins[] = { DB8500_PIN_AD5, DB8500_PIN_AE4 };
+static const unsigned i2c2_b_2_pins[] = { DB8500_PIN_AF5, DB8500_PIN_AG4 };
+static const unsigned msp0txrx_b_1_pins[] = { DB8500_PIN_AC4, DB8500_PIN_AC3 };
+static const unsigned i2c1_b_2_pins[] = { DB8500_PIN_AD3, DB8500_PIN_AD4 };
+/* Just RX and TX for UART2 */
+static const unsigned u2rxtx_b_1_pins[] = { DB8500_PIN_AC2, DB8500_PIN_AC1 };
+static const unsigned uartmodtx_b_1_pins[] = { DB8500_PIN_AB4 };
+static const unsigned msp0sck_b_1_pins[] = { DB8500_PIN_AB3 };
+static const unsigned uartmodrx_b_1_pins[] = { DB8500_PIN_AA3 };
+static const unsigned stmmod_b_1_pins[] = { DB8500_PIN_AA4, DB8500_PIN_Y4,
+	DB8500_PIN_Y2, DB8500_PIN_AA2, DB8500_PIN_AA1 };
+static const unsigned uartmodrx_b_2_pins[] = { DB8500_PIN_AB2 };
+static const unsigned spi3_b_1_pins[] = { DB8500_PIN_W2, DB8500_PIN_W3,
+					  DB8500_PIN_V3, DB8500_PIN_V2 };
+static const unsigned msp1txrx_b_1_pins[] = { DB8500_PIN_AF2, DB8500_PIN_AG2 };
+static const unsigned kp_b_1_pins[] = { DB8500_PIN_F3, DB8500_PIN_F1,
+	DB8500_PIN_G3, DB8500_PIN_G2, DB8500_PIN_E1, DB8500_PIN_E2,
+	DB8500_PIN_G5, DB8500_PIN_G4, DB8500_PIN_H4, DB8500_PIN_H3,
+	DB8500_PIN_J3, DB8500_PIN_H2, DB8500_PIN_J2, DB8500_PIN_H1,
+	DB8500_PIN_F4, DB8500_PIN_E3, DB8500_PIN_E4, DB8500_PIN_D2,
+	DB8500_PIN_C1, DB8500_PIN_D3, DB8500_PIN_C2, DB8500_PIN_D5 };
+static const unsigned sm_b_1_pins[] = { DB8500_PIN_C6, DB8500_PIN_B3,
+	DB8500_PIN_C4, DB8500_PIN_E6, DB8500_PIN_A3, DB8500_PIN_B6,
+	DB8500_PIN_D6, DB8500_PIN_B7, DB8500_PIN_D7, DB8500_PIN_D8,
+	DB8500_PIN_D9, DB8500_PIN_A5, DB8500_PIN_B4, DB8500_PIN_C8,
+	DB8500_PIN_A12, DB8500_PIN_C10, DB8500_PIN_B10, DB8500_PIN_B9,
+	DB8500_PIN_A9, DB8500_PIN_C7, DB8500_PIN_A7, DB8500_PIN_C5,
+	DB8500_PIN_C9, DB8500_PIN_B14 };
+/* This chip select pin can be "ps0" in alt B so have it separately */
+static const unsigned smcs0_b_1_pins[] = { DB8500_PIN_E8 };
+static const unsigned ipgpio7_b_1_pins[] = { DB8500_PIN_B11 };
+static const unsigned ipgpio2_b_1_pins[] = { DB8500_PIN_C12 };
+static const unsigned ipgpio3_b_1_pins[] = { DB8500_PIN_C11 };
+static const unsigned lcdaclk_b_1_pins[] = { DB8500_PIN_C14 };
+static const unsigned lcda_b_1_pins[] = { DB8500_PIN_D22,
+	DB8500_PIN_C23, DB8500_PIN_D23 };
+static const unsigned lcd_b_1_pins[] = { DB8500_PIN_D17, DB8500_PIN_D16,
+	DB8500_PIN_B17, DB8500_PIN_C16, DB8500_PIN_C19, DB8500_PIN_C17,
+	DB8500_PIN_A18, DB8500_PIN_C18, DB8500_PIN_B19, DB8500_PIN_B20,
+	DB8500_PIN_D21, DB8500_PIN_D20, DB8500_PIN_C20, DB8500_PIN_B21,
+	DB8500_PIN_C21, DB8500_PIN_A22, DB8500_PIN_B24, DB8500_PIN_C22 };
+static const unsigned ddrtrig_b_1_pins[] = { DB8500_PIN_AJ27 };
+static const unsigned pwl_b_1_pins[] = { DB8500_PIN_AF25 };
+static const unsigned spi1_b_1_pins[] = { DB8500_PIN_AG15, DB8500_PIN_AF13,
+					  DB8500_PIN_AG13, DB8500_PIN_AH15 };
+static const unsigned mc3_b_1_pins[] = { DB8500_PIN_AH13, DB8500_PIN_AG12,
+	DB8500_PIN_AH12, DB8500_PIN_AH11, DB8500_PIN_AG10, DB8500_PIN_AH10,
+	DB8500_PIN_AJ11, DB8500_PIN_AJ9, DB8500_PIN_AH9, DB8500_PIN_AG9,
+	DB8500_PIN_AG8 };
+static const unsigned pwl_b_2_pins[] = { DB8500_PIN_AF8 };
+static const unsigned pwl_b_3_pins[] = { DB8500_PIN_AG7 };
+static const unsigned pwl_b_4_pins[] = { DB8500_PIN_AF7 };
+
+/* Altfunction C column */
+static const unsigned ipjtag_c_1_pins[] = { DB8500_PIN_AJ5, DB8500_PIN_AJ3,
+	DB8500_PIN_AH4, DB8500_PIN_AH3, DB8500_PIN_AH6 };
+static const unsigned ipgpio6_c_1_pins[] = { DB8500_PIN_AG6 };
+static const unsigned ipgpio0_c_1_pins[] = { DB8500_PIN_AF6 };
+static const unsigned ipgpio1_c_1_pins[] = { DB8500_PIN_AG5 };
+static const unsigned ipgpio3_c_1_pins[] = { DB8500_PIN_AF5 };
+static const unsigned ipgpio2_c_1_pins[] = { DB8500_PIN_AG4 };
+static const unsigned slim0_c_1_pins[] = { DB8500_PIN_AD3, DB8500_PIN_AD4 };
+/* Optional 4-bit Memory Stick interface */
+static const unsigned ms_c_1_pins[] = { DB8500_PIN_AC2, DB8500_PIN_AC1,
+	DB8500_PIN_AB3, DB8500_PIN_AA3, DB8500_PIN_AA4, DB8500_PIN_AB2,
+	DB8500_PIN_Y4, DB8500_PIN_Y2, DB8500_PIN_AA2, DB8500_PIN_AA1 };
+static const unsigned iptrigout_c_1_pins[] = { DB8500_PIN_AB4 };
+static const unsigned u2rxtx_c_1_pins[] = { DB8500_PIN_W2, DB8500_PIN_W3 };
+static const unsigned u2ctsrts_c_1_pins[] = { DB8500_PIN_V3, DB8500_PIN_V2 };
+static const unsigned u0_c_1_pins[] = { DB8500_PIN_AF2, DB8500_PIN_AE1,
+					DB8500_PIN_AE2, DB8500_PIN_AG2 };
+static const unsigned ipgpio4_c_1_pins[] = { DB8500_PIN_F3 };
+static const unsigned ipgpio5_c_1_pins[] = { DB8500_PIN_F1 };
+static const unsigned ipgpio6_c_2_pins[] = { DB8500_PIN_G3 };
+static const unsigned ipgpio7_c_1_pins[] = { DB8500_PIN_G2 };
+static const unsigned smcleale_c_1_pins[] = { DB8500_PIN_E1, DB8500_PIN_E2 };
+static const unsigned stmape_c_1_pins[] = { DB8500_PIN_G5, DB8500_PIN_G4,
+	DB8500_PIN_H4, DB8500_PIN_H3, DB8500_PIN_J3 };
+static const unsigned u2rxtx_c_2_pins[] = { DB8500_PIN_H2, DB8500_PIN_J2 };
+static const unsigned ipgpio2_c_2_pins[] = { DB8500_PIN_F4 };
+static const unsigned ipgpio3_c_2_pins[] = { DB8500_PIN_E3 };
+static const unsigned ipgpio4_c_2_pins[] = { DB8500_PIN_E4 };
+static const unsigned ipgpio5_c_2_pins[] = { DB8500_PIN_D2 };
+static const unsigned mc5_c_1_pins[] = { DB8500_PIN_C6, DB8500_PIN_B3,
+	DB8500_PIN_C4, DB8500_PIN_E6, DB8500_PIN_A3, DB8500_PIN_B6,
+	DB8500_PIN_D6, DB8500_PIN_B7, DB8500_PIN_D7, DB8500_PIN_D8,
+	DB8500_PIN_D9 };
+static const unsigned mc2rstn_c_1_pins[] = { DB8500_PIN_C8 };
+static const unsigned kp_c_1_pins[] = { DB8500_PIN_C9, DB8500_PIN_B11,
+	DB8500_PIN_C12, DB8500_PIN_C11, DB8500_PIN_D17, DB8500_PIN_D16,
+	DB8500_PIN_C23, DB8500_PIN_D23 };
+static const unsigned smps1_c_1_pins[] = { DB8500_PIN_B14 };
+static const unsigned u2rxtx_c_3_pins[] = { DB8500_PIN_B17, DB8500_PIN_C16 };
+static const unsigned stmape_c_2_pins[] = { DB8500_PIN_C19, DB8500_PIN_C17,
+	DB8500_PIN_A18, DB8500_PIN_C18, DB8500_PIN_B19 };
+static const unsigned uartmodrx_c_1_pins[] = { DB8500_PIN_D21 };
+static const unsigned uartmodtx_c_1_pins[] = { DB8500_PIN_D20 };
+static const unsigned stmmod_c_1_pins[] = { DB8500_PIN_C20, DB8500_PIN_B21,
+	DB8500_PIN_C21, DB8500_PIN_A22, DB8500_PIN_B24 };
+static const unsigned usbsim_c_1_pins[] = { DB8500_PIN_D22 };
+static const unsigned mc4rstn_c_1_pins[] = { DB8500_PIN_AF25 };
+static const unsigned clkout_c_1_pins[] = { DB8500_PIN_AH13, DB8500_PIN_AH12 };
+static const unsigned i2c3_c_1_pins[] = { DB8500_PIN_AG12, DB8500_PIN_AH11 };
+static const unsigned spi0_c_1_pins[] = { DB8500_PIN_AH10, DB8500_PIN_AH9,
+					  DB8500_PIN_AG9, DB8500_PIN_AG8 };
+static const unsigned usbsim_c_2_pins[] = { DB8500_PIN_AF8 };
+static const unsigned i2c3_c_2_pins[] = { DB8500_PIN_AG7, DB8500_PIN_AF7 };
+
+/* Other C1 column */
+static const unsigned kp_oc1_1_pins[] = { DB8500_PIN_C6, DB8500_PIN_B3,
+	DB8500_PIN_C4, DB8500_PIN_E6, DB8500_PIN_A3, DB8500_PIN_B6,
+	DB8500_PIN_D6, DB8500_PIN_B7 };
+static const unsigned spi2_oc1_1_pins[] = { DB8500_PIN_AH13, DB8500_PIN_AG12,
+	DB8500_PIN_AH12, DB8500_PIN_AH11 };
+
+#define DB8500_PIN_GROUP(a,b) { .name = #a, .pins = a##_pins,		\
+			.npins = ARRAY_SIZE(a##_pins), .altsetting = b }
+
+static const struct nmk_pingroup nmk_db8500_groups[] = {
+	/* Altfunction A column */
+	DB8500_PIN_GROUP(u0_a_1, NMK_GPIO_ALT_A),
+	DB8500_PIN_GROUP(u1rxtx_a_1, NMK_GPIO_ALT_A),
+	DB8500_PIN_GROUP(u1ctsrts_a_1, NMK_GPIO_ALT_A),
+	DB8500_PIN_GROUP(ipi2c_a_1, NMK_GPIO_ALT_A),
+	DB8500_PIN_GROUP(ipi2c_a_2, NMK_GPIO_ALT_A),
+	DB8500_PIN_GROUP(msp0txrx_a_1, NMK_GPIO_ALT_A),
+	DB8500_PIN_GROUP(msp0tfstck_a_1, NMK_GPIO_ALT_A),
+	DB8500_PIN_GROUP(msp0rfsrck_a_1, NMK_GPIO_ALT_A),
+	DB8500_PIN_GROUP(mc0_a_1, NMK_GPIO_ALT_A),
+	DB8500_PIN_GROUP(msp1txrx_a_1, NMK_GPIO_ALT_A),
+	DB8500_PIN_GROUP(msp1_a_1, NMK_GPIO_ALT_A),
+	DB8500_PIN_GROUP(lcdb_a_1, NMK_GPIO_ALT_A),
+	DB8500_PIN_GROUP(lcdvsi0_a_1, NMK_GPIO_ALT_A),
+	DB8500_PIN_GROUP(lcdvsi1_a_1, NMK_GPIO_ALT_A),
+	DB8500_PIN_GROUP(lcd_d0_d7_a_1, NMK_GPIO_ALT_A),
+	DB8500_PIN_GROUP(lcd_d8_d11_a_1, NMK_GPIO_ALT_A),
+	DB8500_PIN_GROUP(lcd_d12_d23_a_1, NMK_GPIO_ALT_A),
+	DB8500_PIN_GROUP(kp_a_1, NMK_GPIO_ALT_A),
+	DB8500_PIN_GROUP(mc2_a_1, NMK_GPIO_ALT_A),
+	DB8500_PIN_GROUP(ssp1_a_1, NMK_GPIO_ALT_A),
+	DB8500_PIN_GROUP(ssp0_a_1, NMK_GPIO_ALT_A),
+	DB8500_PIN_GROUP(i2c0_a_1, NMK_GPIO_ALT_A),
+	DB8500_PIN_GROUP(ipgpio0_a_1, NMK_GPIO_ALT_A),
+	DB8500_PIN_GROUP(ipgpio1_a_1, NMK_GPIO_ALT_A),
+	DB8500_PIN_GROUP(msp2sck_a_1, NMK_GPIO_ALT_A),
+	DB8500_PIN_GROUP(msp2_a_1, NMK_GPIO_ALT_A),
+	DB8500_PIN_GROUP(mc4_a_1, NMK_GPIO_ALT_A),
+	DB8500_PIN_GROUP(mc1_a_1, NMK_GPIO_ALT_A),
+	DB8500_PIN_GROUP(hsir_a_1, NMK_GPIO_ALT_A),
+	DB8500_PIN_GROUP(hsit_a_1, NMK_GPIO_ALT_A),
+	DB8500_PIN_GROUP(clkout_a_1, NMK_GPIO_ALT_A),
+	DB8500_PIN_GROUP(clkout_a_2, NMK_GPIO_ALT_A),
+	DB8500_PIN_GROUP(usb_a_1, NMK_GPIO_ALT_A),
+	/* Altfunction B column */
+	DB8500_PIN_GROUP(trig_b_1, NMK_GPIO_ALT_B),
+	DB8500_PIN_GROUP(i2c4_b_1, NMK_GPIO_ALT_B),
+	DB8500_PIN_GROUP(i2c1_b_1, NMK_GPIO_ALT_B),
+	DB8500_PIN_GROUP(i2c2_b_1, NMK_GPIO_ALT_B),
+	DB8500_PIN_GROUP(i2c2_b_2, NMK_GPIO_ALT_B),
+	DB8500_PIN_GROUP(msp0txrx_b_1, NMK_GPIO_ALT_B),
+	DB8500_PIN_GROUP(i2c1_b_2, NMK_GPIO_ALT_B),
+	DB8500_PIN_GROUP(u2rxtx_b_1, NMK_GPIO_ALT_B),
+	DB8500_PIN_GROUP(uartmodtx_b_1, NMK_GPIO_ALT_B),
+	DB8500_PIN_GROUP(msp0sck_b_1, NMK_GPIO_ALT_B),
+	DB8500_PIN_GROUP(uartmodrx_b_1, NMK_GPIO_ALT_B),
+	DB8500_PIN_GROUP(stmmod_b_1, NMK_GPIO_ALT_B),
+	DB8500_PIN_GROUP(uartmodrx_b_2, NMK_GPIO_ALT_B),
+	DB8500_PIN_GROUP(spi3_b_1, NMK_GPIO_ALT_B),
+	DB8500_PIN_GROUP(msp1txrx_b_1, NMK_GPIO_ALT_B),
+	DB8500_PIN_GROUP(kp_b_1, NMK_GPIO_ALT_B),
+	DB8500_PIN_GROUP(sm_b_1, NMK_GPIO_ALT_B),
+	DB8500_PIN_GROUP(smcs0_b_1, NMK_GPIO_ALT_B),
+	DB8500_PIN_GROUP(ipgpio7_b_1, NMK_GPIO_ALT_B),
+	DB8500_PIN_GROUP(ipgpio2_b_1, NMK_GPIO_ALT_B),
+	DB8500_PIN_GROUP(ipgpio3_b_1, NMK_GPIO_ALT_B),
+	DB8500_PIN_GROUP(lcdaclk_b_1, NMK_GPIO_ALT_B),
+	DB8500_PIN_GROUP(lcda_b_1, NMK_GPIO_ALT_B),
+	DB8500_PIN_GROUP(lcd_b_1, NMK_GPIO_ALT_B),
+	DB8500_PIN_GROUP(ddrtrig_b_1, NMK_GPIO_ALT_B),
+	DB8500_PIN_GROUP(pwl_b_1, NMK_GPIO_ALT_B),
+	DB8500_PIN_GROUP(spi1_b_1, NMK_GPIO_ALT_B),
+	DB8500_PIN_GROUP(mc3_b_1, NMK_GPIO_ALT_B),
+	DB8500_PIN_GROUP(pwl_b_2, NMK_GPIO_ALT_B),
+	DB8500_PIN_GROUP(pwl_b_3, NMK_GPIO_ALT_B),
+	DB8500_PIN_GROUP(pwl_b_4, NMK_GPIO_ALT_B),
+	/* Altfunction C column */
+	DB8500_PIN_GROUP(ipjtag_c_1, NMK_GPIO_ALT_C),
+	DB8500_PIN_GROUP(ipgpio6_c_1, NMK_GPIO_ALT_C),
+	DB8500_PIN_GROUP(ipgpio0_c_1, NMK_GPIO_ALT_C),
+	DB8500_PIN_GROUP(ipgpio1_c_1, NMK_GPIO_ALT_C),
+	DB8500_PIN_GROUP(ipgpio3_c_1, NMK_GPIO_ALT_C),
+	DB8500_PIN_GROUP(ipgpio2_c_1, NMK_GPIO_ALT_C),
+	DB8500_PIN_GROUP(slim0_c_1, NMK_GPIO_ALT_C),
+	DB8500_PIN_GROUP(ms_c_1, NMK_GPIO_ALT_C),
+	DB8500_PIN_GROUP(iptrigout_c_1, NMK_GPIO_ALT_C),
+	DB8500_PIN_GROUP(u2rxtx_c_1, NMK_GPIO_ALT_C),
+	DB8500_PIN_GROUP(u2ctsrts_c_1, NMK_GPIO_ALT_C),
+	DB8500_PIN_GROUP(u0_c_1, NMK_GPIO_ALT_C),
+	DB8500_PIN_GROUP(ipgpio4_c_1, NMK_GPIO_ALT_C),
+	DB8500_PIN_GROUP(ipgpio5_c_1, NMK_GPIO_ALT_C),
+	DB8500_PIN_GROUP(ipgpio6_c_1, NMK_GPIO_ALT_C),
+	DB8500_PIN_GROUP(ipgpio7_c_1, NMK_GPIO_ALT_C),
+	DB8500_PIN_GROUP(smcleale_c_1, NMK_GPIO_ALT_C),
+	DB8500_PIN_GROUP(stmape_c_1, NMK_GPIO_ALT_C),
+	DB8500_PIN_GROUP(u2rxtx_c_2, NMK_GPIO_ALT_C),
+	DB8500_PIN_GROUP(ipgpio2_c_2, NMK_GPIO_ALT_C),
+	DB8500_PIN_GROUP(ipgpio3_c_2, NMK_GPIO_ALT_C),
+	DB8500_PIN_GROUP(ipgpio4_c_2, NMK_GPIO_ALT_C),
+	DB8500_PIN_GROUP(ipgpio5_c_2, NMK_GPIO_ALT_C),
+	DB8500_PIN_GROUP(mc5_c_1, NMK_GPIO_ALT_C),
+	DB8500_PIN_GROUP(mc2rstn_c_1, NMK_GPIO_ALT_C),
+	DB8500_PIN_GROUP(kp_c_1, NMK_GPIO_ALT_C),
+	DB8500_PIN_GROUP(smps1_c_1, NMK_GPIO_ALT_C),
+	DB8500_PIN_GROUP(u2rxtx_c_3, NMK_GPIO_ALT_C),
+	DB8500_PIN_GROUP(stmape_c_2, NMK_GPIO_ALT_C),
+	DB8500_PIN_GROUP(uartmodrx_c_1, NMK_GPIO_ALT_C),
+	DB8500_PIN_GROUP(uartmodtx_c_1, NMK_GPIO_ALT_C),
+	DB8500_PIN_GROUP(stmmod_c_1, NMK_GPIO_ALT_C),
+	DB8500_PIN_GROUP(usbsim_c_1, NMK_GPIO_ALT_C),
+	DB8500_PIN_GROUP(mc4rstn_c_1, NMK_GPIO_ALT_C),
+	DB8500_PIN_GROUP(clkout_c_1, NMK_GPIO_ALT_C),
+	DB8500_PIN_GROUP(i2c3_c_1, NMK_GPIO_ALT_C),
+	DB8500_PIN_GROUP(spi0_c_1, NMK_GPIO_ALT_C),
+	DB8500_PIN_GROUP(usbsim_c_2, NMK_GPIO_ALT_C),
+	DB8500_PIN_GROUP(i2c3_c_2, NMK_GPIO_ALT_C),
+	/* Other alt C1 column, these are still configured as alt C */
+	DB8500_PIN_GROUP(kp_oc1_1, NMK_GPIO_ALT_C),
+	DB8500_PIN_GROUP(spi2_oc1_1, NMK_GPIO_ALT_C),
+};
+
+static const struct nmk_pinctrl_soc_data nmk_db8500_soc = {
+	.gpio_ranges = nmk_db8500_ranges,
+	.gpio_num_ranges = ARRAY_SIZE(nmk_db8500_ranges),
+	.pins = nmk_db8500_pins,
+	.npins = ARRAY_SIZE(nmk_db8500_pins),
+	.groups = nmk_db8500_groups,
+	.ngroups = ARRAY_SIZE(nmk_db8500_groups),
+};
+
+void __devinit
+nmk_pinctrl_db8500_init(const struct nmk_pinctrl_soc_data **soc)
+{
+	*soc = &nmk_db8500_soc;
+}
diff --git a/drivers/pinctrl/pinctrl-nomadik.c b/drivers/pinctrl/pinctrl-nomadik.c
index 9b126b6..94e3d0a 100644
--- a/drivers/pinctrl/pinctrl-nomadik.c
+++ b/drivers/pinctrl/pinctrl-nomadik.c
@@ -24,12 +24,15 @@ 
 #include <linux/irq.h>
 #include <linux/irqdomain.h>
 #include <linux/slab.h>
+#include <linux/pinctrl/pinctrl.h>
 
 #include <asm/mach/irq.h>
 
 #include <plat/pincfg.h>
 #include <plat/gpio-nomadik.h>
 
+#include "pinctrl-nomadik.h"
+
 /*
  * The GPIO module in the Nomadik family of Systems-on-Chip is an
  * AMBA device, managing 32 pins and alternate functions.  The logic block
@@ -64,6 +67,12 @@  struct nmk_gpio_chip {
 	u32 lowemi;
 };
 
+struct nmk_pinctrl {
+	struct device *dev;
+	struct pinctrl_dev *pctl;
+	const struct nmk_pinctrl_soc_data *soc;
+};
+
 static struct nmk_gpio_chip *
 nmk_gpio_chips[DIV_ROUND_UP(ARCH_NR_GPIOS, NMK_GPIO_PER_CHIP)];
 
@@ -1280,6 +1289,106 @@  out:
 	return ret;
 }
 
+static int nmk_list_groups(struct pinctrl_dev *pctldev, unsigned selector)
+{
+	struct nmk_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev);
+
+	if (selector >= npct->soc->ngroups)
+		return -EINVAL;
+	return 0;
+}
+
+static const char *nmk_get_group_name(struct pinctrl_dev *pctldev,
+				       unsigned selector)
+{
+	struct nmk_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev);
+
+	if (selector >= npct->soc->ngroups)
+		return NULL;
+
+	return npct->soc->groups[selector].name;
+}
+
+static int nmk_get_group_pins(struct pinctrl_dev *pctldev, unsigned selector,
+			      const unsigned **pins,
+			      unsigned *num_pins)
+{
+	struct nmk_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev);
+
+	if (selector >= npct->soc->ngroups)
+		return -EINVAL;
+
+	*pins = npct->soc->groups[selector].pins;
+	*num_pins = npct->soc->groups[selector].npins;
+	return 0;
+}
+
+static void nmk_pin_dbg_show(struct pinctrl_dev *pctldev, struct seq_file *s,
+		   unsigned offset)
+{
+	seq_printf(s, " Nomadik GPIO");
+}
+
+static struct pinctrl_ops nmk_pinctrl_ops = {
+	.list_groups = nmk_list_groups,
+	.get_group_name = nmk_get_group_name,
+	.get_group_pins = nmk_get_group_pins,
+	.pin_dbg_show = nmk_pin_dbg_show,
+};
+
+static struct pinctrl_desc nmk_pinctrl_desc = {
+	.name = "pinctrl-nomadik",
+	.pctlops = &nmk_pinctrl_ops,
+	.owner = THIS_MODULE,
+};
+
+static int __devinit nmk_pinctrl_probe(struct platform_device *pdev)
+{
+	const struct platform_device_id *platid = platform_get_device_id(pdev);
+	struct nmk_pinctrl *npct;
+	int i;
+
+	npct = devm_kzalloc(&pdev->dev, sizeof(*npct), GFP_KERNEL);
+	if (!npct)
+		return -ENOMEM;
+
+	/* Poke in other ASIC variants here */
+	if (platid->driver_data == PINCTRL_NMK_DB8500)
+		nmk_pinctrl_db8500_init(&npct->soc);
+
+	/*
+	 * We need all the GPIO drivers to probe FIRST, or we will not be able
+	 * to obtain references to the struct gpio_chip * for them, and we
+	 * need this to proceed.
+	 */
+	for (i = 0; i < npct->soc->gpio_num_ranges; i++) {
+		if (!nmk_gpio_chips[i]) {
+			dev_warn(&pdev->dev, "GPIO chip %d not registered yet\n", i);
+			devm_kfree(&pdev->dev, npct);
+			return -EPROBE_DEFER;
+		}
+		npct->soc->gpio_ranges[i].gc = &nmk_gpio_chips[i]->chip;
+	}
+
+	nmk_pinctrl_desc.pins = npct->soc->pins;
+	nmk_pinctrl_desc.npins = npct->soc->npins;
+	npct->dev = &pdev->dev;
+	npct->pctl = pinctrl_register(&nmk_pinctrl_desc, &pdev->dev, npct);
+	if (!npct->pctl) {
+		dev_err(&pdev->dev, "could not register Nomadik pinctrl driver\n");
+		return -EINVAL;
+	}
+
+	/* We will handle a range of GPIO pins */
+	for (i = 0; i < npct->soc->gpio_num_ranges; i++)
+		pinctrl_add_gpio_range(npct->pctl, &npct->soc->gpio_ranges[i]);
+
+	platform_set_drvdata(pdev, npct);
+	dev_info(&pdev->dev, "initialized Nomadik pin control driver\n");
+
+	return 0;
+}
+
 static const struct of_device_id nmk_gpio_match[] = {
 	{ .compatible = "st,nomadik-gpio", },
 	{}
@@ -1294,9 +1403,28 @@  static struct platform_driver nmk_gpio_driver = {
 	.probe = nmk_gpio_probe,
 };
 
+static const struct platform_device_id nmk_pinctrl_id[] = {
+	{ "pinctrl-stn8815", PINCTRL_NMK_STN8815 },
+	{ "pinctrl-db8500", PINCTRL_NMK_DB8500 },
+};
+
+static struct platform_driver nmk_pinctrl_driver = {
+	.driver = {
+		.owner = THIS_MODULE,
+		.name = "pinctrl-nomadik",
+	},
+	.probe = nmk_pinctrl_probe,
+	.id_table = nmk_pinctrl_id,
+};
+
 static int __init nmk_gpio_init(void)
 {
-	return platform_driver_register(&nmk_gpio_driver);
+	int ret;
+
+	ret = platform_driver_register(&nmk_gpio_driver);
+	if (ret)
+		return ret;
+	return platform_driver_register(&nmk_pinctrl_driver);
 }
 
 core_initcall(nmk_gpio_init);
diff --git a/drivers/pinctrl/pinctrl-nomadik.h b/drivers/pinctrl/pinctrl-nomadik.h
new file mode 100644
index 0000000..e690acc
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-nomadik.h
@@ -0,0 +1,61 @@ 
+#ifndef PINCTRL_PINCTRL_NOMADIK_H
+#define PINCTRL_PINCTRL_NOMADIK_H
+
+#include <plat/gpio-nomadik.h>
+
+/* Package definitions */
+#define PINCTRL_NMK_STN8815	0
+#define PINCTRL_NMK_DB8500	1
+
+/**
+ * struct nmk_pingroup - describes a Nomadik pin group
+ * @name: the name of this specific pin group
+ * @pins: an array of discrete physical pins used in this group, taken
+ *	from the driver-local pin enumeration space
+ * @num_pins: the number of pins in this group array, i.e. the number of
+ *	elements in .pins so we can iterate over that array
+ * @altsetting: the altsetting to apply to all pins in this group to
+ *	configure them to be used by a function
+ */
+struct nmk_pingroup {
+	const char *name;
+	const unsigned int *pins;
+	const unsigned npins;
+	u32 altsetting;
+};
+
+/**
+ * struct nmk_pinctrl_soc_data - Nomadik pin controller per-SoC configuration
+ * @gpio_ranges: An array of GPIO ranges for this SoC
+ * @gpio_num_ranges: The number of GPIO ranges for this SoC
+ * @pins:	An array describing all pins the pin controller affects.
+ *		All pins which are also GPIOs must be listed first within the
+ *		array, and be numbered identically to the GPIO controller's
+ *		numbering.
+ * @npins:	The numbmer of entries in @pins.
+ * @groups:	An array describing all pin groups the pin SoC supports.
+ * @ngroups:	The number of entries in @groups.
+ */
+struct nmk_pinctrl_soc_data {
+	struct pinctrl_gpio_range *gpio_ranges;
+	unsigned gpio_num_ranges;
+	const struct pinctrl_pin_desc *pins;
+	unsigned npins;
+	const struct nmk_pingroup *groups;
+	unsigned ngroups;
+};
+
+#ifdef CONFIG_PINCTRL_DB8500
+
+void nmk_pinctrl_db8500_init(const struct nmk_pinctrl_soc_data **soc);
+
+#else
+
+static inline void
+nmk_pinctrl_db8500_init(const struct nmk_pinctrl_soc_data **soc)
+{
+}
+
+#endif
+
+#endif /* PINCTRL_PINCTRL_NOMADIK_H */