@@ -371,6 +371,14 @@ config PCIE_DW_MESON
Say Y here if you want to enable DW PCIe controller support on
Amlogic SoCs.
+config PCIE_DW_QCOM
+ bool "Qualcomm DesignWare based PCIe controller"
+ depends on ARCH_SNAPDRAGON
+ select PCIE_DW_COMMON
+ help
+ Say Y here if you want to enable DW PCIe controller support on
+ Qualcomm SoCs.
+
config PCIE_ROCKCHIP
bool "Enable Rockchip PCIe driver"
depends on ARCH_ROCKCHIP
@@ -47,6 +47,7 @@ obj-$(CONFIG_PCIE_MEDIATEK_GEN3) += pcie_mediatek_gen3.o
obj-$(CONFIG_PCIE_ROCKCHIP) += pcie_rockchip.o
obj-$(CONFIG_PCIE_DW_ROCKCHIP) += pcie_dw_rockchip.o
obj-$(CONFIG_PCIE_DW_MESON) += pcie_dw_meson.o
+obj-$(CONFIG_PCIE_DW_QCOM) += pcie_dw_qcom.o
obj-$(CONFIG_PCI_BRCMSTB) += pcie_brcmstb.o
obj-$(CONFIG_PCI_OCTEONTX) += pci_octeontx.o
obj-$(CONFIG_PCIE_OCTEON) += pcie_octeon.o
new file mode 100644
@@ -0,0 +1,571 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include <clk.h>
+#include <dm.h>
+#include <generic-phy.h>
+#include <pci.h>
+#include <u-boot/crc.h>
+#include <power-domain.h>
+#include <reset.h>
+#include <syscon.h>
+#include <malloc.h>
+#include <power/regulator.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm-generic/gpio.h>
+#include <dm/device_compat.h>
+#include <linux/iopoll.h>
+#include <linux/delay.h>
+#include <linux/log2.h>
+#include <linux/bitfield.h>
+
+#include "pcie_dw_common.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct qcom_pcie;
+
+struct qcom_pcie_ops {
+ int (*config_sid)(struct qcom_pcie *priv);
+};
+
+#define NUM_SUPPLIES 2
+
+struct qcom_pcie {
+ /* Must be first member of the struct */
+ struct pcie_dw dw;
+ void *parf;
+ struct phy phy;
+ struct reset_ctl_bulk rsts;
+ struct clk_bulk clks;
+ struct gpio_desc rst_gpio;
+ struct qcom_pcie_ops *ops;
+ struct udevice *vregs[NUM_SUPPLIES];
+};
+
+/* PARF registers */
+#define PARF_SYS_CTRL 0x00
+#define PARF_PM_CTRL 0x20
+#define PARF_PCS_DEEMPH 0x34
+#define PARF_PCS_SWING 0x38
+#define PARF_PHY_CTRL 0x40
+#define PARF_PHY_REFCLK 0x4c
+#define PARF_CONFIG_BITS 0x50
+#define PARF_DBI_BASE_ADDR 0x168
+#define PARF_MHI_CLOCK_RESET_CTRL 0x174
+#define PARF_AXI_MSTR_WR_ADDR_HALT 0x178
+#define PARF_AXI_MSTR_WR_ADDR_HALT_V2 0x1a8
+#define PARF_Q2A_FLUSH 0x1ac
+#define PARF_LTSSM 0x1b0
+#define PARF_SID_OFFSET 0x234
+#define PARF_BDF_TRANSLATE_CFG 0x24c
+#define PARF_SLV_ADDR_SPACE_SIZE 0x358
+#define PARF_DEVICE_TYPE 0x1000
+#define PARF_BDF_TO_SID_TABLE_N 0x2000
+
+/* ELBI registers */
+#define ELBI_SYS_CTRL 0x04
+
+/* DBI registers */
+#define AXI_MSTR_RESP_COMP_CTRL0 0x818
+#define AXI_MSTR_RESP_COMP_CTRL1 0x81c
+#define MISC_CONTROL_1_REG 0x8bc
+
+/* MHI registers */
+#define PARF_DEBUG_CNT_PM_LINKST_IN_L2 0xc04
+#define PARF_DEBUG_CNT_PM_LINKST_IN_L1 0xc0c
+#define PARF_DEBUG_CNT_PM_LINKST_IN_L0S 0xc10
+#define PARF_DEBUG_CNT_AUX_CLK_IN_L1SUB_L1 0xc84
+#define PARF_DEBUG_CNT_AUX_CLK_IN_L1SUB_L2 0xc88
+
+/* PARF_SYS_CTRL register fields */
+#define MAC_PHY_POWERDOWN_IN_P2_D_MUX_EN BIT(29)
+#define MST_WAKEUP_EN BIT(13)
+#define SLV_WAKEUP_EN BIT(12)
+#define MSTR_ACLK_CGC_DIS BIT(10)
+#define SLV_ACLK_CGC_DIS BIT(9)
+#define CORE_CLK_CGC_DIS BIT(6)
+#define AUX_PWR_DET BIT(4)
+#define L23_CLK_RMV_DIS BIT(2)
+#define L1_CLK_RMV_DIS BIT(1)
+
+/* PARF_PM_CTRL register fields */
+#define REQ_NOT_ENTR_L1 BIT(5)
+
+/* PARF_PCS_DEEMPH register fields */
+#define PCS_DEEMPH_TX_DEEMPH_GEN1(x) FIELD_PREP(GENMASK(21, 16), x)
+#define PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(x) FIELD_PREP(GENMASK(13, 8), x)
+#define PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(x) FIELD_PREP(GENMASK(5, 0), x)
+
+/* PARF_PCS_SWING register fields */
+#define PCS_SWING_TX_SWING_FULL(x) FIELD_PREP(GENMASK(14, 8), x)
+#define PCS_SWING_TX_SWING_LOW(x) FIELD_PREP(GENMASK(6, 0), x)
+
+/* PARF_PHY_CTRL register fields */
+#define PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK GENMASK(20, 16)
+#define PHY_CTRL_PHY_TX0_TERM_OFFSET(x) FIELD_PREP(PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK, x)
+#define PHY_TEST_PWR_DOWN BIT(0)
+
+/* PARF_PHY_REFCLK register fields */
+#define PHY_REFCLK_SSP_EN BIT(16)
+#define PHY_REFCLK_USE_PAD BIT(12)
+
+/* PARF_CONFIG_BITS register fields */
+#define PHY_RX0_EQ(x) FIELD_PREP(GENMASK(26, 24), x)
+
+/* PARF_SLV_ADDR_SPACE_SIZE register value */
+#define SLV_ADDR_SPACE_SZ 0x10000000
+
+/* PARF_MHI_CLOCK_RESET_CTRL register fields */
+#define AHB_CLK_EN BIT(0)
+#define MSTR_AXI_CLK_EN BIT(1)
+#define BYPASS BIT(4)
+
+/* PARF_AXI_MSTR_WR_ADDR_HALT register fields */
+#define EN BIT(31)
+
+/* PARF_LTSSM register fields */
+#define LTSSM_EN BIT(8)
+
+/* PARF_DEVICE_TYPE register fields */
+#define DEVICE_TYPE_RC 0x4
+
+/* ELBI_SYS_CTRL register fields */
+#define ELBI_SYS_CTRL_LT_ENABLE BIT(0)
+
+/* AXI_MSTR_RESP_COMP_CTRL0 register fields */
+#define CFG_REMOTE_RD_REQ_BRIDGE_SIZE_2K 0x4
+#define CFG_REMOTE_RD_REQ_BRIDGE_SIZE_4K 0x5
+
+/* AXI_MSTR_RESP_COMP_CTRL1 register fields */
+#define CFG_BRIDGE_SB_INIT BIT(0)
+
+/* MISC_CONTROL_1_REG register fields */
+#define DBI_RO_WR_EN 1
+
+/* PCI_EXP_SLTCAP register fields */
+#define PCIE_CAP_SLOT_POWER_LIMIT_VAL FIELD_PREP(PCI_EXP_SLTCAP_SPLV, 250)
+#define PCIE_CAP_SLOT_POWER_LIMIT_SCALE FIELD_PREP(PCI_EXP_SLTCAP_SPLS, 1)
+#define PCIE_CAP_SLOT_VAL (PCI_EXP_SLTCAP_ABP | \
+ PCI_EXP_SLTCAP_PCP | \
+ PCI_EXP_SLTCAP_MRLSP | \
+ PCI_EXP_SLTCAP_AIP | \
+ PCI_EXP_SLTCAP_PIP | \
+ PCI_EXP_SLTCAP_HPS | \
+ PCI_EXP_SLTCAP_HPC | \
+ PCI_EXP_SLTCAP_EIP | \
+ PCIE_CAP_SLOT_POWER_LIMIT_VAL | \
+ PCIE_CAP_SLOT_POWER_LIMIT_SCALE)
+
+#define PERST_DELAY_US 1000
+
+#define LINK_WAIT_MAX_RETRIES 10
+#define LINK_WAIT_USLEEP 100000
+
+#define QCOM_PCIE_CRC8_POLYNOMIAL (BIT(2) | BIT(1) | BIT(0))
+
+#define CRC8_TABLE_SIZE 256
+
+static bool qcom_pcie_wait_link_up(struct qcom_pcie *priv)
+{
+ u8 offset = pcie_dw_find_capability(&priv->dw, PCI_CAP_ID_EXP);
+ unsigned int cnt = 0;
+ u16 val;
+
+ do {
+ val = readw(priv->dw.dbi_base + offset + PCI_EXP_LNKSTA);
+
+ if ((val & PCI_EXP_LNKSTA_DLLLA))
+ return true;
+ cnt++;
+
+ udelay(LINK_WAIT_USLEEP);
+ } while (cnt < LINK_WAIT_MAX_RETRIES);
+
+ return false;
+}
+
+static void qcom_pcie_clear_aspm_l0s(struct qcom_pcie *priv)
+{
+ u8 offset = pcie_dw_find_capability(&priv->dw, PCI_CAP_ID_EXP);
+ u32 val;
+
+ dw_pcie_dbi_write_enable(&priv->dw, true);
+
+ val = readl(priv->dw.dbi_base + offset + PCI_EXP_LNKCAP);
+ val &= ~PCI_EXP_LNKCAP_ASPM_L0S;
+ writel(val, priv->dw.dbi_base + offset + PCI_EXP_LNKCAP);
+
+ dw_pcie_dbi_write_enable(&priv->dw, false);
+}
+
+static void qcom_pcie_clear_hpc(struct qcom_pcie *priv)
+{
+ u8 offset = pcie_dw_find_capability(&priv->dw, PCI_CAP_ID_EXP);
+ u32 val;
+
+ dw_pcie_dbi_write_enable(&priv->dw, true);
+
+ val = readl(priv->dw.dbi_base + offset + PCI_EXP_SLTCAP);
+ val &= ~PCI_EXP_SLTCAP_HPC;
+ writel(val, priv->dw.dbi_base + offset + PCI_EXP_SLTCAP);
+
+ dw_pcie_dbi_write_enable(&priv->dw, false);
+}
+
+static void qcom_pcie_set_lanes(struct qcom_pcie *priv, unsigned int lanes)
+{
+ u8 offset = pcie_dw_find_capability(&priv->dw, PCI_CAP_ID_EXP);
+ u32 val;
+
+ val = readl(priv->dw.dbi_base + offset + PCI_EXP_LNKCAP);
+ val &= ~PCI_EXP_LNKCAP_MLW;
+ val |= FIELD_PREP(PCI_EXP_LNKCAP_MLW, lanes);
+ writel(val, priv->dw.dbi_base + offset + PCI_EXP_LNKCAP);
+}
+
+static int qcom_pcie_config_sid_1_9_0(struct qcom_pcie *priv)
+{
+ /* iommu map structure */
+ struct {
+ u32 bdf;
+ u32 phandle;
+ u32 smmu_sid;
+ u32 smmu_sid_len;
+ } *map;
+ void *bdf_to_sid_base = priv->parf + PARF_BDF_TO_SID_TABLE_N;
+ int i, nr_map, size = 0;
+ u32 smmu_sid_base;
+
+ dev_read_prop(priv->dw.dev, "iommu-map", &size);
+ if (!size)
+ return 0;
+
+ map = malloc(size);
+ if (!map)
+ return -ENOMEM;
+
+ dev_read_u32_array(priv->dw.dev, "iommu-map", (u32 *)map, size / sizeof(u32));
+
+ nr_map = size / (sizeof(*map));
+
+ /* Registers need to be zero out first */
+ memset_io(bdf_to_sid_base, 0, CRC8_TABLE_SIZE * sizeof(u32));
+
+ /* Extract the SMMU SID base from the first entry of iommu-map */
+ smmu_sid_base = map[0].smmu_sid;
+
+ /* Look for an available entry to hold the mapping */
+ for (i = 0; i < nr_map; i++) {
+ __be16 bdf_be = cpu_to_be16(map[i].bdf);
+ u32 val;
+ u8 hash;
+
+ hash = crc8(QCOM_PCIE_CRC8_POLYNOMIAL, (u8 *)&bdf_be, sizeof(bdf_be));
+
+ val = readl(bdf_to_sid_base + hash * sizeof(u32));
+
+ /* If the register is already populated, look for next available entry */
+ while (val) {
+ u8 current_hash = hash++;
+ u8 next_mask = 0xff;
+
+ /* If NEXT field is NULL then update it with next hash */
+ if (!(val & next_mask)) {
+ val |= (u32)hash;
+ writel(val, bdf_to_sid_base + current_hash * sizeof(u32));
+ }
+
+ val = readl(bdf_to_sid_base + hash * sizeof(u32));
+ }
+
+ /* BDF [31:16] | SID [15:8] | NEXT [7:0] */
+ val = map[i].bdf << 16 | (map[i].smmu_sid - smmu_sid_base) << 8 | 0;
+ writel(val, bdf_to_sid_base + hash * sizeof(u32));
+ }
+
+ free(map);
+
+ return 0;
+}
+
+static void qcom_pcie_configure(struct qcom_pcie *priv)
+{
+ u32 val;
+
+ dw_pcie_dbi_write_enable(&priv->dw, true);
+
+ val = readl(priv->dw.dbi_base + PCIE_PORT_LINK_CONTROL);
+ val &= ~PORT_LINK_FAST_LINK_MODE;
+ val |= PORT_LINK_DLL_LINK_EN;
+ val &= ~PORT_LINK_MODE_MASK;
+ val |= PORT_LINK_MODE_2_LANES;
+ writel(val, priv->dw.dbi_base + PCIE_PORT_LINK_CONTROL);
+
+ val = readl(priv->dw.dbi_base + PCIE_LINK_WIDTH_SPEED_CONTROL);
+ val &= ~PORT_LOGIC_LINK_WIDTH_MASK;
+ val |= PORT_LOGIC_LINK_WIDTH_2_LANES;
+ writel(val, priv->dw.dbi_base + PCIE_LINK_WIDTH_SPEED_CONTROL);
+
+ qcom_pcie_set_lanes(priv, 2);
+
+ dw_pcie_dbi_write_enable(&priv->dw, false);
+}
+
+static int qcom_pcie_init_port(struct udevice *dev)
+{
+ struct qcom_pcie *priv = dev_get_priv(dev);
+ int vreg, ret;
+ u32 val;
+
+ dm_gpio_set_value(&priv->rst_gpio, 1);
+ udelay(PERST_DELAY_US);
+
+ ret = generic_phy_init(&priv->phy);
+ if (ret) {
+ dev_err(dev, "failed to init phy (%d)\n", ret);
+ return ret;
+ }
+
+ udelay(PERST_DELAY_US);
+
+ for (vreg = 0; vreg < NUM_SUPPLIES; ++vreg) {
+ ret = regulator_set_enable(priv->vregs[vreg], true);
+ if (ret && ret != -ENOSYS)
+ dev_warn(dev, "failed to enable regulator %d (%d)\n", vreg, ret);
+ }
+
+ ret = clk_enable_bulk(&priv->clks);
+ if (ret) {
+ dev_err(dev, "failed to enable clocks (%d)\n", ret);
+ goto err_power_off_phy;
+ }
+
+ ret = reset_assert_bulk(&priv->rsts);
+ if (ret) {
+ dev_err(dev, "failed to assert resets (%d)\n", ret);
+ goto err_disable_clks;
+ }
+
+ udelay(PERST_DELAY_US);
+
+ ret = reset_deassert_bulk(&priv->rsts);
+ if (ret) {
+ dev_err(dev, "failed to deassert resets (%d)\n", ret);
+ goto err_power_off_phy;
+ }
+
+ udelay(PERST_DELAY_US);
+
+ /* configure PCIe to RC mode */
+ writel(DEVICE_TYPE_RC, priv->parf + PARF_DEVICE_TYPE);
+
+ /* enable PCIe clocks and resets */
+ val = readl(priv->parf + PARF_PHY_CTRL);
+ val &= ~PHY_TEST_PWR_DOWN;
+ writel(val, priv->parf + PARF_PHY_CTRL);
+
+ /* change DBI base address */
+ writel(0, priv->parf + PARF_DBI_BASE_ADDR);
+
+ /* MAC PHY_POWERDOWN MUX DISABLE */
+ val = readl(priv->parf + PARF_SYS_CTRL);
+ val &= ~MAC_PHY_POWERDOWN_IN_P2_D_MUX_EN;
+ writel(val, priv->parf + PARF_SYS_CTRL);
+
+ val = readl(priv->parf + PARF_MHI_CLOCK_RESET_CTRL);
+ val |= BYPASS;
+ writel(val, priv->parf + PARF_MHI_CLOCK_RESET_CTRL);
+
+ /* Enable L1 and L1SS */
+ val = readl(priv->parf + PARF_PM_CTRL);
+ val &= ~REQ_NOT_ENTR_L1;
+ writel(val, priv->parf + PARF_PM_CTRL);
+
+ val = readl(priv->parf + PARF_AXI_MSTR_WR_ADDR_HALT_V2);
+ val |= EN;
+ writel(val, priv->parf + PARF_AXI_MSTR_WR_ADDR_HALT_V2);
+
+ ret = generic_phy_power_on(&priv->phy);
+ if (ret) {
+ dev_err(dev, "failed to power on phy (%d)\n", ret);
+ goto err_exit_phy;
+ }
+
+ qcom_pcie_clear_aspm_l0s(priv);
+ qcom_pcie_clear_hpc(priv);
+
+ mdelay(100);
+ dm_gpio_set_value(&priv->rst_gpio, 0);
+ udelay(PERST_DELAY_US);
+
+ if (priv->ops && priv->ops->config_sid) {
+ ret = priv->ops->config_sid(priv);
+ if (ret)
+ goto err_deassert_bulk;
+ }
+
+ qcom_pcie_configure(priv);
+
+ pcie_dw_setup_host(&priv->dw);
+
+ /* enable link training */
+ val = readl(priv->parf + PARF_LTSSM);
+ val |= LTSSM_EN;
+ writel(val, priv->parf + PARF_LTSSM);
+
+ return 0;
+err_deassert_bulk:
+ reset_assert_bulk(&priv->rsts);
+err_disable_clks:
+ clk_disable_bulk(&priv->clks);
+err_power_off_phy:
+ generic_phy_power_off(&priv->phy);
+err_exit_phy:
+ generic_phy_exit(&priv->phy);
+
+ return ret;
+}
+
+static const char *qcom_pcie_vregs[NUM_SUPPLIES] = {
+ "vdda-supply",
+ "vddpe-3v3-supply",
+};
+
+static int qcom_pcie_parse_dt(struct udevice *dev)
+{
+ struct qcom_pcie *priv = dev_get_priv(dev);
+ int vreg, ret;
+
+ priv->dw.dbi_base = dev_read_addr_name_ptr(dev, "dbi");
+ if (!priv->dw.dbi_base)
+ return -EINVAL;
+
+ dev_dbg(dev, "DBI address is 0x%p\n", priv->dw.dbi_base);
+
+ priv->dw.atu_base = dev_read_addr_name_ptr(dev, "atu");
+ if (!priv->dw.atu_base)
+ return -EINVAL;
+
+ dev_dbg(dev, "ATU address is 0x%p\n", priv->dw.atu_base);
+
+ priv->parf = dev_read_addr_name_ptr(dev, "parf");
+ if (!priv->parf)
+ return -EINVAL;
+
+ dev_dbg(dev, "PARF address is 0x%p\n", priv->parf);
+
+ ret = gpio_request_by_name(dev, "perst-gpios", 0,
+ &priv->rst_gpio, GPIOD_IS_OUT);
+ if (ret) {
+ dev_err(dev, "failed to find reset-gpios property\n");
+ return ret;
+ }
+
+ ret = reset_get_bulk(dev, &priv->rsts);
+ if (ret) {
+ dev_err(dev, "failed to get resets (%d)\n", ret);
+ return ret;
+ }
+
+ ret = clk_get_bulk(dev, &priv->clks);
+ if (ret) {
+ dev_err(dev, "failed to get clocks (%d)\n", ret);
+ return ret;
+ }
+
+ ret = generic_phy_get_by_index(dev, 0, &priv->phy);
+ if (ret) {
+ dev_err(dev, "failed to get pcie phy (%d)\n", ret);
+ return ret;
+ }
+
+ for (vreg = 0; vreg < NUM_SUPPLIES; ++vreg) {
+ ret = device_get_supply_regulator(dev, qcom_pcie_vregs[vreg], &priv->vregs[vreg]);
+ if (ret)
+ dev_warn(dev, "failed to get regulator %d (%d)\n", vreg, ret);
+ }
+
+ return 0;
+}
+
+/**
+ * qcom_pcie_probe() - Probe the PCIe bus for active link
+ *
+ * @dev: A pointer to the device being operated on
+ *
+ * Probe for an active link on the PCIe bus and configure the controller
+ * to enable this port.
+ *
+ * Return: 0 on success, else -ENODEV
+ */
+static int qcom_pcie_probe(struct udevice *dev)
+{
+ struct qcom_pcie *priv = dev_get_priv(dev);
+ struct udevice *ctlr = pci_get_controller(dev);
+ struct pci_controller *hose = dev_get_uclass_priv(ctlr);
+ int ret = 0;
+
+ priv->dw.first_busno = dev_seq(dev);
+ priv->dw.dev = dev;
+
+ ret = qcom_pcie_parse_dt(dev);
+ if (ret)
+ return ret;
+
+ ret = qcom_pcie_init_port(dev);
+ if (ret) {
+ dm_gpio_free(dev, &priv->rst_gpio);
+ return ret;
+ }
+
+ if (qcom_pcie_wait_link_up(priv))
+ printf("PCIE-%d: Link up (Gen%d-x%d, Bus%d)\n",
+ dev_seq(dev), pcie_dw_get_link_speed(&priv->dw),
+ pcie_dw_get_link_width(&priv->dw),
+ hose->first_busno);
+ else
+ printf("PCIE-%d: Link up timeout\n", dev_seq(dev));
+
+ return pcie_dw_prog_outbound_atu_unroll(&priv->dw,
+ PCIE_ATU_REGION_INDEX0,
+ PCIE_ATU_TYPE_MEM,
+ priv->dw.mem.phys_start,
+ priv->dw.mem.bus_start,
+ priv->dw.mem.size);
+}
+
+static const struct dm_pci_ops qcom_pcie_ops = {
+ .read_config = pcie_dw_read_config,
+ .write_config = pcie_dw_write_config,
+};
+
+static const struct qcom_pcie_ops ops_1_9_0 = {
+ .config_sid = qcom_pcie_config_sid_1_9_0,
+};
+
+static const struct udevice_id qcom_pcie_ids[] = {
+ { .compatible = "qcom,pcie-sa8540p", .data = (ulong)&ops_1_9_0 },
+ { .compatible = "qcom,pcie-sc7280", .data = (ulong)&ops_1_9_0 },
+ { .compatible = "qcom,pcie-sc8180x", .data = (ulong)&ops_1_9_0 },
+ { .compatible = "qcom,pcie-sc8280xp", .data = (ulong)&ops_1_9_0 },
+ { .compatible = "qcom,pcie-sdm845" },
+ { .compatible = "qcom,pcie-sdx55", .data = (ulong)&ops_1_9_0 },
+ { .compatible = "qcom,pcie-sm8150", .data = (ulong)&ops_1_9_0 },
+ { .compatible = "qcom,pcie-sm8250", .data = (ulong)&ops_1_9_0 },
+ { .compatible = "qcom,pcie-sm8350", .data = (ulong)&ops_1_9_0 },
+ { .compatible = "qcom,pcie-sm8450-pcie0", .data = (ulong)&ops_1_9_0 },
+ { .compatible = "qcom,pcie-sm8450-pcie1", .data = (ulong)&ops_1_9_0 },
+ { .compatible = "qcom,pcie-sm8550", .data = (ulong)&ops_1_9_0 },
+ { .compatible = "qcom,pcie-x1e80100", .data = (ulong)&ops_1_9_0 },
+ { }
+};
+
+U_BOOT_DRIVER(qcom_dw_pcie) = {
+ .name = "pcie_dw_qcom",
+ .id = UCLASS_PCI,
+ .of_match = qcom_pcie_ids,
+ .ops = &qcom_pcie_ops,
+ .probe = qcom_pcie_probe,
+ .priv_auto = sizeof(struct qcom_pcie),
+};
@@ -390,6 +390,9 @@
#define PCI_EXP_LNKCAP_SLS_5_0GB 0x00000002 /* LNKCAP2 SLS Vector bit 1 */
#define PCI_EXP_LNKCAP_SLS_8_0GB 0x00000003 /* LNKCAP2 SLS Vector bit 2 */
#define PCI_EXP_LNKCAP_MLW 0x000003f0 /* Maximum Link Width */
+#define PCI_EXP_LNKCAP_ASPMS 0x00000c00 /* ASPM Support */
+#define PCI_EXP_LNKCAP_ASPM_L0S 0x00000400 /* ASPM L0s Support */
+#define PCI_EXP_LNKCAP_ASPM_L1 0x00000800 /* ASPM L1 Support */
#define PCI_EXP_LNKCAP_DLLLARC 0x00100000 /* Data Link Layer Link Active Reporting Capable */
#define PCI_EXP_LNKCTL 16 /* Link Control */
#define PCI_EXP_LNKCTL_RL 0x0020 /* Retrain Link */
@@ -404,6 +407,7 @@
#define PCI_EXP_LNKSTA_DLLLA 0x2000 /* Data Link Layer Link Active */
#define PCI_EXP_LNKSTA_LBMS 0x4000 /* Link Bandwidth Management Status */
#define PCI_EXP_SLTCAP 20 /* Slot Capabilities */
+#define PCI_EXP_SLTCAP_HPC 0x00000040 /* Hot-Plug Capable */
#define PCI_EXP_SLTCAP_PSN 0xfff80000 /* Physical Slot Number */
#define PCI_EXP_RTCTL 28 /* Root Control */
#define PCI_EXP_RTCTL_CRSSVE 0x0010 /* CRS Software Visibility Enable */
Add support for the PCIe busses on Qualcomm platforms, by using the pcie_dw_common infrastructure. The driver is based on the Linux driver but only supporting the "1_9_0" and compatible platforms like: - sa8540p - sc7280 - sc8180x - sc8280xp - sdm845 - sdx55 - sm8150 - sm8250 - sm8350 - sm8450 - sm8550 - sm8650 - x1e80100 But it has only been tested on: - sc7280 - sm8550 - sm8650 - x1e80100 It supports setting the IOMMU SID table for supported platforms. Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> --- drivers/pci/Kconfig | 8 + drivers/pci/Makefile | 1 + drivers/pci/pcie_dw_qcom.c | 571 +++++++++++++++++++++++++++++++++++++++++++++ include/pci.h | 4 + 4 files changed, 584 insertions(+)