@@ -773,10 +773,26 @@ static irqreturn_t unicam_isr(int irq, void *dev)
* as complete, as the HW will reuse that buffer.
*/
if (node->cur_frm && node->cur_frm != node->next_frm) {
+ /*
+ * This condition checks if FE + FS for the same
+ * frame has occurred. In such cases, we cannot
+ * return out the frame, as no buffer handling
+ * or timestamping has yet been done as part of
+ * the FS handler.
+ */
+ if (!node->cur_frm->vb.vb2_buf.timestamp) {
+ dev_dbg(unicam->v4l2_dev.dev,
+ "ISR: FE without FS, dropping frame\n");
+ continue;
+ }
+
unicam_process_buffer_complete(node, sequence);
+ node->cur_frm = node->next_frm;
+ node->next_frm = NULL;
inc_seq = true;
+ } else {
+ node->cur_frm = node->next_frm;
}
- node->cur_frm = node->next_frm;
}
/*
@@ -812,10 +828,25 @@ static irqreturn_t unicam_isr(int irq, void *dev)
i);
/*
* Set the next frame output to go to a dummy frame
- * if we have not managed to obtain another frame
- * from the queue.
+ * if no buffer currently queued.
*/
- unicam_schedule_dummy_buffer(node);
+ if (!node->next_frm ||
+ node->next_frm == node->cur_frm) {
+ unicam_schedule_dummy_buffer(node);
+ } else if (unicam->node[i].cur_frm) {
+ /*
+ * Repeated FS without FE. Hardware will have
+ * swapped buffers, but the cur_frm doesn't
+ * contain valid data. Return cur_frm to the
+ * queue.
+ */
+ spin_lock(&node->dma_queue_lock);
+ list_add_tail(&node->cur_frm->list,
+ &node->dma_queue);
+ spin_unlock(&node->dma_queue_lock);
+ node->cur_frm = node->next_frm;
+ node->next_frm = NULL;
+ }
}
unicam_queue_event_sof(unicam);
This change aligns the FS/FE interrupt handling with the Raspberry Pi kernel downstream Unicam driver. If we get a simultaneous FS + FE interrupt for the same frame, it cannot be marked as completed and returned to userland as the framebuffer will be refilled by Unicam on the next sensor frame. Additionally, the timestamp will be set to 0 as the FS interrupt handling code will not have run yet. To avoid these problems, the frame is considered dropped in the FE handler, and will be returned to userland on the subsequent sensor frame. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> --- .../media/platform/broadcom/bcm2835-unicam.c | 39 +++++++++++++++++-- 1 file changed, 35 insertions(+), 4 deletions(-)