diff mbox series

[v4] Bluetooth: SCO: Add support for 16 bits transparent voice setting

Message ID 20241206181727.928963-1-luiz.dentz@gmail.com
State New
Headers show
Series [v4] Bluetooth: SCO: Add support for 16 bits transparent voice setting | expand

Commit Message

Luiz Augusto von Dentz Dec. 6, 2024, 6:17 p.m. UTC
From: Frédéric Danis <frederic.danis@collabora.com>

The voice setting is used by sco_connect() or sco_conn_defer_accept()
after being set by sco_sock_setsockopt().

The PCM part of the voice setting is used for offload mode through PCM
chipset port.
This commits add support for mSBC 16 bits offloading, i.e. audio data
not transported over HCI.

The BCM4349B1 supports 16 bits transparent data on its I2S port.
If BT_VOICE_TRANSPARENT is used when accepting a SCO connection, this
gives only garbage audio while using BT_VOICE_TRANSPARENT_16BIT gives
correct audio.
This has been tested with connection to iPhone 14 and Samsung S24.

Fixes: ad10b1a48754 ("Bluetooth: Add Bluetooth socket voice option")
Signed-off-by: Frédéric Danis <frederic.danis@collabora.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
---
 include/net/bluetooth/bluetooth.h |  1 +
 net/bluetooth/sco.c               | 29 +++++++++++++++--------------
 2 files changed, 16 insertions(+), 14 deletions(-)

Comments

bluez.test.bot@gmail.com Dec. 6, 2024, 6:37 p.m. UTC | #1
This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=915442

---Test result---

Test Summary:
CheckPatch                    PENDING   0.33 seconds
GitLint                       PENDING   0.30 seconds
SubjectPrefix                 PASS      0.06 seconds
BuildKernel                   PASS      25.24 seconds
CheckAllWarning               PASS      27.14 seconds
CheckSparse                   WARNING   30.69 seconds
BuildKernel32                 PASS      24.68 seconds
TestRunnerSetup               PASS      436.03 seconds
TestRunner_l2cap-tester       PASS      20.55 seconds
TestRunner_iso-tester         FAIL      35.84 seconds
TestRunner_bnep-tester        PASS      4.89 seconds
TestRunner_mgmt-tester        PASS      118.94 seconds
TestRunner_rfcomm-tester      PASS      7.67 seconds
TestRunner_sco-tester         PASS      9.43 seconds
TestRunner_ioctl-tester       PASS      8.14 seconds
TestRunner_mesh-tester        FAIL      6.22 seconds
TestRunner_smp-tester         PASS      8.64 seconds
TestRunner_userchan-tester    PASS      5.09 seconds
IncrementalBuild              PENDING   0.68 seconds

Details
##############################
Test: CheckPatch - PENDING
Desc: Run checkpatch.pl script
Output:

##############################
Test: GitLint - PENDING
Desc: Run gitlint
Output:

##############################
Test: CheckSparse - WARNING
Desc: Run sparse tool with linux kernel
Output:
net/bluetooth/sco.c: note: in included file:./include/net/bluetooth/hci_core.h:147:35: warning: array of flexible structures
##############################
Test: TestRunner_iso-tester - FAIL
Desc: Run iso-tester with test-runner
Output:
WARNING: possible circular locking dependency detected
Total: 125, Passed: 121 (96.8%), Failed: 0, Not Run: 4
##############################
Test: TestRunner_mesh-tester - FAIL
Desc: Run mesh-tester with test-runner
Output:
Total: 10, Passed: 9 (90.0%), Failed: 1, Not Run: 0

Failed Test Cases
Mesh - Send cancel - 2                               Failed       0.111 seconds
##############################
Test: IncrementalBuild - PENDING
Desc: Incremental build with the patches in the series
Output:



---
Regards,
Linux Bluetooth
patchwork-bot+bluetooth@kernel.org Dec. 11, 2024, 3:20 p.m. UTC | #2
Hello:

This patch was applied to bluetooth/bluetooth-next.git (master)
by Luiz Augusto von Dentz <luiz.von.dentz@intel.com>:

On Fri,  6 Dec 2024 13:17:27 -0500 you wrote:
> From: Frédéric Danis <frederic.danis@collabora.com>
> 
> The voice setting is used by sco_connect() or sco_conn_defer_accept()
> after being set by sco_sock_setsockopt().
> 
> The PCM part of the voice setting is used for offload mode through PCM
> chipset port.
> This commits add support for mSBC 16 bits offloading, i.e. audio data
> not transported over HCI.
> 
> [...]

Here is the summary with links:
  - [v4] Bluetooth: SCO: Add support for 16 bits transparent voice setting
    https://git.kernel.org/bluetooth/bluetooth-next/c/fd5bbbcab77e

You are awesome, thank you!
diff mbox series

Patch

diff --git a/include/net/bluetooth/bluetooth.h b/include/net/bluetooth/bluetooth.h
index e6760c11f007..435250c72d56 100644
--- a/include/net/bluetooth/bluetooth.h
+++ b/include/net/bluetooth/bluetooth.h
@@ -123,6 +123,7 @@  struct bt_voice {
 
 #define BT_VOICE_TRANSPARENT			0x0003
 #define BT_VOICE_CVSD_16BIT			0x0060
+#define BT_VOICE_TRANSPARENT_16BIT		0x0063
 
 #define BT_SNDMTU		12
 #define BT_RCVMTU		13
diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c
index 40c4957cfc0b..aa7bfe26cb40 100644
--- a/net/bluetooth/sco.c
+++ b/net/bluetooth/sco.c
@@ -319,10 +319,13 @@  static int sco_connect(struct sock *sk)
 	else
 		type = SCO_LINK;
 
-	if (sco_pi(sk)->setting == BT_VOICE_TRANSPARENT &&
-	    (!lmp_transp_capable(hdev) || !lmp_esco_capable(hdev))) {
-		err = -EOPNOTSUPP;
-		goto unlock;
+	switch (sco_pi(sk)->setting & SCO_AIRMODE_MASK) {
+	case SCO_AIRMODE_TRANSP:
+		if (!lmp_transp_capable(hdev) || !lmp_esco_capable(hdev)) {
+			err = -EOPNOTSUPP;
+			goto unlock;
+		}
+		break;
 	}
 
 	hcon = hci_connect_sco(hdev, type, &sco_pi(sk)->dst,
@@ -920,13 +923,6 @@  static int sco_sock_setsockopt(struct socket *sock, int level, int optname,
 		if (err)
 			break;
 
-		/* Explicitly check for these values */
-		if (voice.setting != BT_VOICE_TRANSPARENT &&
-		    voice.setting != BT_VOICE_CVSD_16BIT) {
-			err = -EINVAL;
-			break;
-		}
-
 		sco_pi(sk)->setting = voice.setting;
 		hdev = hci_get_route(&sco_pi(sk)->dst, &sco_pi(sk)->src,
 				     BDADDR_BREDR);
@@ -934,9 +930,14 @@  static int sco_sock_setsockopt(struct socket *sock, int level, int optname,
 			err = -EBADFD;
 			break;
 		}
-		if (enhanced_sync_conn_capable(hdev) &&
-		    voice.setting == BT_VOICE_TRANSPARENT)
-			sco_pi(sk)->codec.id = BT_CODEC_TRANSPARENT;
+
+		switch (sco_pi(sk)->setting & SCO_AIRMODE_MASK) {
+		case SCO_AIRMODE_TRANSP:
+			if (enhanced_sync_conn_capable(hdev))
+				sco_pi(sk)->codec.id = BT_CODEC_TRANSPARENT;
+			break;
+		}
+
 		hci_dev_put(hdev);
 		break;