@@ -6,6 +6,7 @@
* Copyright (c) 2022, Richard Acayan. All rights reserved.
*/
+#include <dt-bindings/clock/qcom,camcc-sdm845.h>
#include <dt-bindings/clock/qcom,dispcc-sdm845.h>
#include <dt-bindings/clock/qcom,gcc-sdm845.h>
#include <dt-bindings/clock/qcom,rpmh.h>
@@ -1168,6 +1169,34 @@ tlmm: pinctrl@3400000 {
gpio-ranges = <&tlmm 0 0 151>;
wakeup-parent = <&pdc>;
+ cci0_default: cci0-default-state {
+ pins = "gpio17", "gpio18";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ cci0_sleep: cci0-sleep-state {
+ pins = "gpio17", "gpio18";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ cci1_default: cci1-default-state {
+ pins = "gpio19", "gpio20";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ cci1_sleep: cci1-sleep-state {
+ pins = "gpio19", "gpio20";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
qup_i2c0_default: qup-i2c0-default-state {
pins = "gpio0", "gpio1";
function = "qup0";
@@ -1400,6 +1429,162 @@ spmi_bus: spmi@c440000 {
#interrupt-cells = <4>;
};
+ cci: cci@ac4a000 {
+ compatible = "qcom,sdm670-cci", "qcom,msm8996-cci";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <0 0x0ac4a000 0 0x4000>;
+ interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
+ power-domains = <&camcc TITAN_TOP_GDSC>;
+
+ clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+ <&camcc CAM_CC_SOC_AHB_CLK>,
+ <&camcc CAM_CC_CPAS_AHB_CLK>,
+ <&camcc CAM_CC_CCI_CLK>;
+ clock-names = "camnoc_axi",
+ "soc_ahb",
+ "cpas_ahb",
+ "cci";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&cci0_default &cci1_default>;
+ pinctrl-1 = <&cci0_sleep &cci1_sleep>;
+
+ status = "disabled";
+
+ cci_i2c0: i2c-bus@0 {
+ reg = <0>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cci_i2c1: i2c-bus@1 {
+ reg = <1>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ camss: camera-controller@acb3000 {
+ compatible = "qcom,sdm670-camss";
+ reg = <0 0x0acb3000 0 0x1000>,
+ <0 0x0acba000 0 0x1000>,
+ <0 0x0acc8000 0 0x1000>,
+ <0 0x0ac65000 0 0x1000>,
+ <0 0x0ac66000 0 0x1000>,
+ <0 0x0ac67000 0 0x1000>,
+ <0 0x0acaf000 0 0x4000>,
+ <0 0x0acb6000 0 0x4000>,
+ <0 0x0acc4000 0 0x4000>;
+ reg-names = "csid0",
+ "csid1",
+ "csid2",
+ "csiphy0",
+ "csiphy1",
+ "csiphy2",
+ "vfe0",
+ "vfe1",
+ "vfe_lite";
+
+ interrupts = <GIC_SPI 464 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 466 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 467 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 469 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "csid0",
+ "csid1",
+ "csid2",
+ "csiphy0",
+ "csiphy1",
+ "csiphy2",
+ "vfe0",
+ "vfe1",
+ "vfe_lite";
+
+ clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+ <&gcc GCC_CAMERA_AXI_CLK>,
+ <&camcc CAM_CC_SOC_AHB_CLK>,
+ <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+ <&camcc CAM_CC_CPAS_AHB_CLK>,
+ <&camcc CAM_CC_IFE_0_CSID_CLK>,
+ <&camcc CAM_CC_IFE_1_CSID_CLK>,
+ <&camcc CAM_CC_IFE_LITE_CSID_CLK>,
+ <&camcc CAM_CC_CSIPHY0_CLK>,
+ <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY1_CLK>,
+ <&camcc CAM_CC_CSI1PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY2_CLK>,
+ <&camcc CAM_CC_CSI2PHYTIMER_CLK>,
+ <&camcc CAM_CC_IFE_0_AXI_CLK>,
+ <&camcc CAM_CC_IFE_0_CLK>,
+ <&camcc CAM_CC_IFE_0_CPHY_RX_CLK>,
+ <&camcc CAM_CC_IFE_1_AXI_CLK>,
+ <&camcc CAM_CC_IFE_1_CLK>,
+ <&camcc CAM_CC_IFE_1_CPHY_RX_CLK>,
+ <&camcc CAM_CC_IFE_LITE_CLK>,
+ <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>;
+ clock-names = "gcc_camera_ahb",
+ "gcc_camera_axi",
+ "soc_ahb",
+ "camnoc_axi",
+ "cpas_ahb",
+ "csi0",
+ "csi1",
+ "csi2",
+ "csiphy0",
+ "csiphy0_timer",
+ "csiphy1",
+ "csiphy1_timer",
+ "csiphy2",
+ "csiphy2_timer",
+ "vfe0_axi",
+ "vfe0",
+ "vfe0_cphy_rx",
+ "vfe1_axi",
+ "vfe1",
+ "vfe1_cphy_rx",
+ "vfe_lite",
+ "vfe_lite_cphy_rx";
+
+ iommus = <&apps_smmu 0x808 0x0>,
+ <&apps_smmu 0x810 0x8>,
+ <&apps_smmu 0xc08 0x0>,
+ <&apps_smmu 0xc10 0x8>;
+
+ power-domains = <&camcc IFE_0_GDSC>,
+ <&camcc IFE_1_GDSC>,
+ <&camcc TITAN_TOP_GDSC>;
+ power-domain-names = "ife0",
+ "ife1",
+ "top";
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ camss_port0: port@0 {
+ reg = <0>;
+ };
+
+ camss_port1: port@1 {
+ reg = <1>;
+ };
+
+ camss_port2: port@2 {
+ reg = <2>;
+ };
+ };
+ };
+
camcc: clock-controller@ad00000 {
compatible = "qcom,sdm670-camcc", "qcom,sdm845-camcc";
reg = <0 0x0ad00000 0 0x10000>;