diff mbox series

[2/3] arm64: dts: qcom: x1e80100-qcp: Add FSUSB42 USB switches

Message ID 20241212-x1e80100-qcp-dp-v1-2-37cb362a0dfe@linaro.org
State New
Headers show
Series Add FSUSB42 USB switch and external DP for Qualcomm X1E80100 QCP | expand

Commit Message

Stephan Gerhold Dec. 12, 2024, 1:08 p.m. UTC 
Unlike most X1E boards, the QCP does not have Parade PS8830 retimers on the
three USB-C ports. Instead, there are FSUSB42 USB switches for each port
that handle orientation switching for the SBU lines. The overall setup is
similar to the gpio-sbu-mux defined for sc8280xp-crd and the ThinkPad X13s.

Co-developed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
---
 arch/arm64/boot/dts/qcom/x1e80100-qcp.dts | 154 ++++++++++++++++++++++++++++++
 1 file changed, 154 insertions(+)

Comments

Konrad Dybcio Dec. 12, 2024, 3:08 p.m. UTC | #1 
On 12.12.2024 2:08 PM, Stephan Gerhold wrote:
> Unlike most X1E boards, the QCP does not have Parade PS8830 retimers on the
> three USB-C ports. Instead, there are FSUSB42 USB switches for each port
> that handle orientation switching for the SBU lines. The overall setup is
> similar to the gpio-sbu-mux defined for sc8280xp-crd and the ThinkPad X13s.
> 
> Co-developed-by: Abel Vesa <abel.vesa@linaro.org>
> Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
> Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
index 5ef030c60abe2998d093ee60a6754a90cd5aaf72..cc0561debdb0b5c89f5d7f298d34f1feaf183b61 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
@@ -84,6 +84,14 @@  pmic_glink_ss0_ss_in: endpoint {
 						remote-endpoint = <&usb_1_ss0_qmpphy_out>;
 					};
 				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss0_sbu: endpoint {
+						remote-endpoint = <&usb_1_ss0_sbu_mux>;
+					};
+				};
 			};
 		};
 
@@ -112,6 +120,14 @@  pmic_glink_ss1_ss_in: endpoint {
 						remote-endpoint = <&usb_1_ss1_qmpphy_out>;
 					};
 				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss1_sbu: endpoint {
+						remote-endpoint = <&usb_1_ss1_sbu_mux>;
+					};
+				};
 			};
 		};
 
@@ -140,6 +156,14 @@  pmic_glink_ss2_ss_in: endpoint {
 						remote-endpoint = <&usb_1_ss2_qmpphy_out>;
 					};
 				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss2_sbu: endpoint {
+						remote-endpoint = <&usb_1_ss2_sbu_mux>;
+					};
+				};
 			};
 		};
 	};
@@ -256,6 +280,63 @@  vreg_nvme: regulator-nvme {
 
 		regulator-boot-on;
 	};
+
+	usb-1-ss0-sbu-mux {
+		compatible = "onnn,fsusb42", "gpio-sbu-mux";
+
+		enable-gpios = <&tlmm 168 GPIO_ACTIVE_LOW>;
+		select-gpios = <&tlmm 167 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&usb_1_ss0_sbu_default>;
+		pinctrl-names = "default";
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			usb_1_ss0_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_ss0_sbu>;
+			};
+		};
+	};
+
+	usb-1-ss1-sbu-mux {
+		compatible = "onnn,fsusb42", "gpio-sbu-mux";
+
+		enable-gpios = <&tlmm 179 GPIO_ACTIVE_LOW>;
+		select-gpios = <&tlmm 178 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&usb_1_ss1_sbu_default>;
+		pinctrl-names = "default";
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			usb_1_ss1_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_ss1_sbu>;
+			};
+		};
+	};
+
+	usb-1-ss2-sbu-mux {
+		compatible = "onnn,fsusb42", "gpio-sbu-mux";
+
+		enable-gpios = <&tlmm 171 GPIO_ACTIVE_LOW>;
+		select-gpios = <&tlmm 170 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&usb_1_ss2_sbu_default>;
+		pinctrl-names = "default";
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			usb_1_ss2_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_ss2_sbu>;
+			};
+		};
+	};
 };
 
 &apps_rsc {
@@ -872,6 +953,79 @@  wake-n-pins {
 		};
 	};
 
+	usb_1_ss0_sbu_default: usb-1-ss0-sbu-state {
+		mode-pins {
+			pins = "gpio166";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <2>;
+			output-high;
+		};
+
+		oe-n-pins {
+			pins = "gpio168";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <2>;
+		};
+
+		sel-pins {
+			pins = "gpio167";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <2>;
+		};
+
+	};
+
+	usb_1_ss1_sbu_default: usb-1-ss1-sbu-state {
+		mode-pins {
+			pins = "gpio177";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <2>;
+			output-high;
+		};
+
+		oe-n-pins {
+			pins = "gpio179";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <2>;
+		};
+
+		sel-pins {
+			pins = "gpio178";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <2>;
+		};
+	};
+
+	usb_1_ss2_sbu_default: usb-1-ss2-sbu-state {
+		mode-pins {
+			pins = "gpio169";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <2>;
+			output-high;
+		};
+
+		oe-n-pins {
+			pins = "gpio171";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <2>;
+		};
+
+		sel-pins {
+			pins = "gpio170";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <2>;
+		};
+	};
+
 	wcd_default: wcd-reset-n-active-state {
 		pins = "gpio191";
 		function = "gpio";