| Message ID | 20241212150232.3823088-2-quic_chejiang@quicinc.com |
|---|---|
| State | New |
| Headers | show |
| Series | Expand firmware-name property to load specific | expand |
On Thu, Dec 12, 2024 at 11:02:29PM +0800, Cheng Jiang wrote: > Expand the firmware-name property to specify the names of NVM and > rampatch firmware to load. This update will support loading specific > firmware (nvm and rampatch) for certain chips, like the QCA6698 > Bluetooth chip, which shares the same IP core as the WCN6855 but has > different RF components and RAM sizes, requiring new firmware files. > > We might use different connectivity boards on the same platform. For > example, QCA6698-based boards can support either a two-antenna or > three-antenna solution, both of which work on the sa8775p-ride platform. > Due to differences in connectivity boards and variations in RF > performance from different foundries, different NVM configurations are > used based on the board ID. > > So In firmware-name, if the NVM file has an extension, the NVM file will > be used. Otherwise, the system will first try the .bNN (board ID) file, > and if that fails, it will fall back to the .bin file. > > Possible configurations: > firmware-name = "QCA6698/hpnv21.bin", "QCA6698/hpbtfw21.tlv"; > firmware-name = "QCA6698/hpnv21", "QCA6698/hpbtfw21.tlv"; > firmware-name = "QCA6698/hpnv21.bin"; > > Signed-off-by: Cheng Jiang <quic_chejiang@quicinc.com> > --- > .../bindings/net/bluetooth/qualcomm-bluetooth.yaml | 5 ++++- > 1 file changed, 4 insertions(+), 1 deletion(-) Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml b/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml index 7bb68311c..a6bc0b18b 100644 --- a/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml +++ b/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml @@ -101,7 +101,10 @@ properties: max-speed: true firmware-name: - description: specify the name of nvm firmware to load + minItems: 1 + items: + - description: specify the name of nvm firmware to load + - description: specify the name of rampatch firmware to load local-bd-address: true
Expand the firmware-name property to specify the names of NVM and rampatch firmware to load. This update will support loading specific firmware (nvm and rampatch) for certain chips, like the QCA6698 Bluetooth chip, which shares the same IP core as the WCN6855 but has different RF components and RAM sizes, requiring new firmware files. We might use different connectivity boards on the same platform. For example, QCA6698-based boards can support either a two-antenna or three-antenna solution, both of which work on the sa8775p-ride platform. Due to differences in connectivity boards and variations in RF performance from different foundries, different NVM configurations are used based on the board ID. So In firmware-name, if the NVM file has an extension, the NVM file will be used. Otherwise, the system will first try the .bNN (board ID) file, and if that fails, it will fall back to the .bin file. Possible configurations: firmware-name = "QCA6698/hpnv21.bin", "QCA6698/hpbtfw21.tlv"; firmware-name = "QCA6698/hpnv21", "QCA6698/hpbtfw21.tlv"; firmware-name = "QCA6698/hpnv21.bin"; Signed-off-by: Cheng Jiang <quic_chejiang@quicinc.com> --- .../bindings/net/bluetooth/qualcomm-bluetooth.yaml | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)