diff mbox series

[v2,2/9] i2c: riic: Use local `dev` pointer in `dev_err_probe()`

Message ID 20241218001618.488946-3-prabhakar.mahadev-lad.rj@bp.renesas.com
State New
Headers show
Series Add support for I2C bus recovery for riic driver | expand

Commit Message

Prabhakar Dec. 18, 2024, 12:16 a.m. UTC 
From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

Update the `riic_init_hw()` function to use the local `dev` pointer in
calls to `dev_err_probe()`. Previously, `riic_init_hw()` used
`riic->adapter.dev` in error reporting. Since this function is invoked
during the probe phase, the I2C adapter is not yet initialized, leading to
`(null) ...` being printed in error messages. This patch fixes the issue by
consistently using the local `dev` pointer, which points to
`riic->adapter.dev.parent`.

Additionally, replace `dev_err()` with `dev_err_probe()` throughout
`riic_init_hw()` for consistency.

Fixes: d982d66514192 ("i2c: riic: remove clock and frequency restrictions")
Fixes: 71dacb2565ed (i2c: riic: Simplify unsupported bus speed handling")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v1->v2
- Collected RB tag from Geert
---
 drivers/i2c/busses/i2c-riic.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

Comments

Andi Shyti Dec. 19, 2024, 12:21 p.m. UTC | #1 
Hi Prabhakar,

> diff --git a/drivers/i2c/busses/i2c-riic.c b/drivers/i2c/busses/i2c-riic.c
> index bfaa2d728a76..01195ffd4c07 100644
> --- a/drivers/i2c/busses/i2c-riic.c
> +++ b/drivers/i2c/busses/i2c-riic.c
> @@ -320,7 +320,7 @@ static int riic_init_hw(struct riic_dev *riic)
>  				      : I2C_MAX_FAST_MODE_FREQ;
>  
>  	if (t->bus_freq_hz > max_freq)
> -		return dev_err_probe(&riic->adapter.dev, -EINVAL,
> +		return dev_err_probe(dev, -EINVAL,
>  				     "unsupported bus speed %uHz (%u max)\n",
>  				     t->bus_freq_hz, max_freq);

Which branch are you on? This change has already been introduced
in commit 71dacb2565ed ("i2c: riic: Simplify unsupported bus
speed handling")

>  
> @@ -356,11 +356,9 @@ static int riic_init_hw(struct riic_dev *riic)
>  		rate /= 2;
>  	}
>  
> -	if (brl > (0x1F + 3)) {
> -		dev_err(&riic->adapter.dev, "invalid speed (%lu). Too slow.\n",
> -			(unsigned long)t->bus_freq_hz);
> -		return -EINVAL;
> -	}
> +	if (brl > (0x1F + 3))
> +		return dev_err_probe(dev, -EINVAL, "invalid speed (%lu). Too slow.\n",
> +				     (unsigned long)t->bus_freq_hz);

This is OK

Thanks,
Andi

>  
>  	brh = total_ticks - brl;
>  
> -- 
> 2.43.0
>
Prabhakar Dec. 19, 2024, 12:44 p.m. UTC | #2 
Hi Andi,

On Thu, Dec 19, 2024 at 12:21 PM Andi Shyti <andi.shyti@kernel.org> wrote:
>
> Hi Prabhakar,
>
> > diff --git a/drivers/i2c/busses/i2c-riic.c b/drivers/i2c/busses/i2c-riic.c
> > index bfaa2d728a76..01195ffd4c07 100644
> > --- a/drivers/i2c/busses/i2c-riic.c
> > +++ b/drivers/i2c/busses/i2c-riic.c
> > @@ -320,7 +320,7 @@ static int riic_init_hw(struct riic_dev *riic)
> >                                     : I2C_MAX_FAST_MODE_FREQ;
> >
> >       if (t->bus_freq_hz > max_freq)
> > -             return dev_err_probe(&riic->adapter.dev, -EINVAL,
> > +             return dev_err_probe(dev, -EINVAL,
> >                                    "unsupported bus speed %uHz (%u max)\n",
> >                                    t->bus_freq_hz, max_freq);
>
> Which branch are you on? This change has already been introduced
> in commit 71dacb2565ed ("i2c: riic: Simplify unsupported bus
> speed handling")
>
I'm on v6.13-rc3, the above change just replaces the first parameter
in dev_err_probe(). The change introduced in commit 71dacb2565ed
("i2c: riic: Simplify unsupported bus speed handling") does not update
the first parameter in dev_err_probe() which this patch addresses.
Actually I have fixes tag for commit 71dacb2565ed in the current
patch.

Cheers,
Prabhakar
Andi Shyti Dec. 19, 2024, 9:08 p.m. UTC | #3 
Hi Prabhakar,

On Thu, Dec 19, 2024 at 12:44:50PM +0000, Lad, Prabhakar wrote:
> Hi Andi,
> 
> On Thu, Dec 19, 2024 at 12:21 PM Andi Shyti <andi.shyti@kernel.org> wrote:
> >
> > Hi Prabhakar,
> >
> > > diff --git a/drivers/i2c/busses/i2c-riic.c b/drivers/i2c/busses/i2c-riic.c
> > > index bfaa2d728a76..01195ffd4c07 100644
> > > --- a/drivers/i2c/busses/i2c-riic.c
> > > +++ b/drivers/i2c/busses/i2c-riic.c
> > > @@ -320,7 +320,7 @@ static int riic_init_hw(struct riic_dev *riic)
> > >                                     : I2C_MAX_FAST_MODE_FREQ;
> > >
> > >       if (t->bus_freq_hz > max_freq)
> > > -             return dev_err_probe(&riic->adapter.dev, -EINVAL,
> > > +             return dev_err_probe(dev, -EINVAL,
> > >                                    "unsupported bus speed %uHz (%u max)\n",
> > >                                    t->bus_freq_hz, max_freq);
> >
> > Which branch are you on? This change has already been introduced
> > in commit 71dacb2565ed ("i2c: riic: Simplify unsupported bus
> > speed handling")
> >
> I'm on v6.13-rc3, the above change just replaces the first parameter
> in dev_err_probe(). The change introduced in commit 71dacb2565ed
> ("i2c: riic: Simplify unsupported bus speed handling") does not update
> the first parameter in dev_err_probe() which this patch addresses.
> Actually I have fixes tag for commit 71dacb2565ed in the current
> patch.

oh, yes, sorry, ignore that :-)

Andi
Wolfram Sang Dec. 20, 2024, 9:18 p.m. UTC | #4 
On Wed, Dec 18, 2024 at 12:16:11AM +0000, Prabhakar wrote:
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> 
> Update the `riic_init_hw()` function to use the local `dev` pointer in
> calls to `dev_err_probe()`. Previously, `riic_init_hw()` used
> `riic->adapter.dev` in error reporting. Since this function is invoked
> during the probe phase, the I2C adapter is not yet initialized, leading to
> `(null) ...` being printed in error messages. This patch fixes the issue by
> consistently using the local `dev` pointer, which points to
> `riic->adapter.dev.parent`.
> 
> Additionally, replace `dev_err()` with `dev_err_probe()` throughout
> `riic_init_hw()` for consistency.
> 
> Fixes: d982d66514192 ("i2c: riic: remove clock and frequency restrictions")
> Fixes: 71dacb2565ed (i2c: riic: Simplify unsupported bus speed handling")
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Maybe patches 1+2 can be squashed, but I leave this to Andi.

Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
diff mbox series

Patch

diff --git a/drivers/i2c/busses/i2c-riic.c b/drivers/i2c/busses/i2c-riic.c
index bfaa2d728a76..01195ffd4c07 100644
--- a/drivers/i2c/busses/i2c-riic.c
+++ b/drivers/i2c/busses/i2c-riic.c
@@ -320,7 +320,7 @@  static int riic_init_hw(struct riic_dev *riic)
 				      : I2C_MAX_FAST_MODE_FREQ;
 
 	if (t->bus_freq_hz > max_freq)
-		return dev_err_probe(&riic->adapter.dev, -EINVAL,
+		return dev_err_probe(dev, -EINVAL,
 				     "unsupported bus speed %uHz (%u max)\n",
 				     t->bus_freq_hz, max_freq);
 
@@ -356,11 +356,9 @@  static int riic_init_hw(struct riic_dev *riic)
 		rate /= 2;
 	}
 
-	if (brl > (0x1F + 3)) {
-		dev_err(&riic->adapter.dev, "invalid speed (%lu). Too slow.\n",
-			(unsigned long)t->bus_freq_hz);
-		return -EINVAL;
-	}
+	if (brl > (0x1F + 3))
+		return dev_err_probe(dev, -EINVAL, "invalid speed (%lu). Too slow.\n",
+				     (unsigned long)t->bus_freq_hz);
 
 	brh = total_ticks - brl;