| Message ID | 20241220-sm6350-uart1-icc-v1-1-f4f10fd91adf@fairphone.com |
|---|---|
| State | New |
| Headers | show |
| Series | arm64: dts: qcom: sm6350: Fix uart1 interconnect path | expand |
On Fri, 20 Dec 2024 09:59:50 +0100, Luca Weiss wrote: > The path MASTER_QUP_0 to SLAVE_EBI_CH0 would be qup-memory path and not > qup-config. Since the qup-memory path is not part of the qcom,geni-uart > bindings, just replace that path with the correct path for qup-config. > > Applied, thanks! [1/1] arm64: dts: qcom: sm6350: Fix uart1 interconnect path commit: be2f81eaa2c8e81d3de5b73dca5e133f63384cb3 Best regards,
diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi index 8d697280249fefcc62ab0848e949b5509deb32a6..7b5c340df5f6f32233f4254db2012f84bdde6be2 100644 --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi @@ -936,7 +936,7 @@ uart1: serial@884000 { power-domains = <&rpmhpd SM6350_CX>; operating-points-v2 = <&qup_opp_table>; interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, - <&aggre1_noc MASTER_QUP_0 0 &clk_virt SLAVE_EBI_CH0 0>; + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; };
The path MASTER_QUP_0 to SLAVE_EBI_CH0 would be qup-memory path and not qup-config. Since the qup-memory path is not part of the qcom,geni-uart bindings, just replace that path with the correct path for qup-config. Fixes: b179f35b887b ("arm64: dts: qcom: sm6350: add uart1 node") Cc: stable@vger.kernel.org Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> --- arch/arm64/boot/dts/qcom/sm6350.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- base-commit: 8155b4ef3466f0e289e8fcc9e6e62f3f4dceeac2 change-id: 20241220-sm6350-uart1-icc-de4c0ab8413d Best regards,