@@ -108,6 +108,36 @@ pmic_glink_ss_in: endpoint {
};
};
+ vreg_afvdd_2p8: regulator-afvdd-2p8 {
+ compatible = "regulator-fixed";
+ regulator-name = "AFVDD_2P8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ gpio = <&tlmm 68 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vreg_bob>;
+ };
+
+ vreg_ois_avdd0_1p8: regulator-ois-avdd0-1p8 {
+ compatible = "regulator-fixed";
+ regulator-name = "OIS_AVDD0_1P8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&tlmm 157 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vreg_bob>;
+ };
+
+ vreg_ois_dvdd_1p1: regulator-ois-dvdd-1p1 {
+ compatible = "regulator-fixed";
+ regulator-name = "OIS_DVDD_1P1";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ gpio = <&tlmm 97 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vreg_s8b>;
+ };
+
reserved-memory {
cont_splash_mem: cont-splash@e1000000 {
reg = <0x0 0xe1000000 0x0 0x2300000>;
@@ -134,36 +164,6 @@ rmtfs_mem: memory@f8500000 {
};
};
- ois_avdd0_1p8: regulator-ois-avdd0-1p8 {
- compatible = "regulator-fixed";
- regulator-name = "OIS_AVDD0_1P8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- gpio = <&tlmm 157 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- vin-supply = <&vreg_bob>;
- };
-
- ois_dvdd_1p1: regulator-ois-dvdd-1p1 {
- compatible = "regulator-fixed";
- regulator-name = "OIS_DVDD_1P1";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- gpio = <&tlmm 97 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- vin-supply = <&vreg_s8b>;
- };
-
- afvdd_2p8: regulator-afvdd-2p8 {
- compatible = "regulator-fixed";
- regulator-name = "AFVDD_2P8";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- gpio = <&tlmm 68 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- vin-supply = <&vreg_bob>;
- };
-
thermal-zones {
camera-thermal {
polling-delay-passive = <0>;
Add the common vreg_ prefix to the labels of the regulator-fixed. Also make sure the nodes are sorted alphabetically. Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> --- arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts | 60 +++++++++++----------- 1 file changed, 30 insertions(+), 30 deletions(-)